Capillary Extrusion Studies of LLDPE/LDPE Blends: Effects of Manufacturing Technology of LLDPE and Long Chain Branching

References

Arnal, M. L., et al., “Miscibility of Linear and Branched Polyethylene by Thermal Fractionation: Use of the Successive Self-nucleation and Annealing (SSA) Technique”, Polymer, 42, 6877–6890 (2001)10.1016/S0032-3861(01)00177-XSearch in Google Scholar

Cho, K, et al., “Rheological and Mechanical Properties in Polyethylene Blends”, Polym. Eng. Sci., 38, 1969–1975 (1998)10.1002/pen.10366Search in Google Scholar

Cogswell, F. N., “Converging Flow of Polymer Melt in Extrusion Dies”, Polym. Eng. Sci., 12, 64–73 (1972)10.1002/pen.760120111Search in Google Scholar

Cogswell, F. N., “Stretching Flow Instabilities at the Exits of Extrusion Dies”, J. Non-Newton. Fluid Mech., 2, 37–47 (1977a)10.1016/0377-0257(77)80031-1Search in Google Scholar

Cogswell, F. N., “Converging Flow and Stretching Flow: A Compilation”, J. Non-Newtonian Fluid Mech., 4, 23–38 (1977b)10.1016/0377-0257(78)85004-6Search in Google Scholar

Dealy, J. M., Wissbrun, K. F.: Melt Rheology and its Role in Plastics Processing. Theory and Applications, Van Nostrand Reinhold, New York (1990)10.1007/978-94-009-2163-4Search in Google Scholar

Dealy, J. M., KimS., “Chapter 7 Gross Melt Fracture in Extrusion”, in Polymer Processing Instabilities: Control and Understanding, Hatzikiriakos, S. G., Migler, K. B. (Eds.), Marcel Dekker, New York, p. 207–236 (2005)Search in Google Scholar

Delgadillo-Velázquez, O., Hatzikiriakos, S. G., “Processability of LLDPE/LDPE Blends: Capillary Extrusion Studies”, Polym. Eng. Sci., 47, 1317–1326 (2007)10.1002/pen.20811Search in Google Scholar

Delgadillo-Velázquez, O., et al., “Thermorheological Properties of LLDPE/LDPE Blends”, Rheol. Acta, 47, 19–31 (2008a)10.1007/s00397-007-0193-8Search in Google Scholar

Delgadillo-Velázquez, O., et al., “Thermorheological Properties of LLDPE/LDPE Blends II. Effects of Production Technology of LLDPE”, accepted by J. Polym. Phys. Part B: Physics (2008b)10.1002/polb.21504Search in Google Scholar

Doerpinhaus, P. J., Baird, D. G., “Comparison of the Melt Fracture Behavior of Metallocene and Conventional Polyethylenes”, Rheol. Acta, 42, 544–556 (2003)10.1007/s00397-003-0309-8Search in Google Scholar

El Kissi, N., Piau, J. M., “Adhesion of Linear Low-Density Polyethylene for Flow Regimes with Sharkskin,” J. Rheol., 38, 1447–1463 (1994)10.1122/1.550552Search in Google Scholar

Fang, Y., et al., “Thermal and Rheological Properties of mLLDPE/LDPE Blends”, Polym. Eng. Sci., 45, 1254–1269 (2005)10.1002/pen.20401Search in Google Scholar

Gabriel, C., Münstedt, H., “Creep Recovery Behavior of Metallocene Linear Low-Density Polyethylenes”, Rheol. Acta., 38, 393–403 (1999)10.1007/s003970050190Search in Google Scholar

Gabriel, C., Münstedt, H., “Influence of Long-chain Branches in Polyethylenes on Linear Viscoelastic Flow Properties in Shear”, Rheol. Acta, 41, 232–244 (2002)10.1007/s00397-001-0219-6Search in Google Scholar

Gabriel, C., Münstedt, H., “Strain Hardening of Various Polyolefins in Uniaxial Elongational Flow”, J. Rheol., 47, 619–630 (2003)10.1122/1.1567752Search in Google Scholar

Georgiou, G., “Chapter 6 Stick-slip Instability, in Polymer Processing Instabilities: Control and Understanding”, Hatzikiriakos, S. G., Migler, K. B. (Eds.), Marcel Dekker, New York, p. 161–206 (2005)Search in Google Scholar

Hatzikiriakos, S. G., Dealy, J. M., “Wall Slip of Molten High Density Polyethylene. II. Cappillary Rheometer Studies”, J. Rheol., 36, 703–741 (1992)10.1122/1.550313Search in Google Scholar

Hatzikiriakos, S. G., “Long Chain Branching and Polydispersity Effects on the Rheological Properties of Polyethylenes”, Polym. Eng. Sci., 40, 2279–2287 (2000)10.1002/pen.11360Search in Google Scholar

Hatzikiriakos, S. G., Migler, K. B., “Chapter 1 Overview of Processing Instabilities” Hatzikiriakos, S. G., Migler, K. B., (Eds.), Marcel Dekker, New York, p. 1–12 (2005)10.1201/9781420030686.ch0Search in Google Scholar

Ho, K., et al., “Melt Strength of Linear-low Density Polyethylene/Low Density Polyethylene Blends”, J. Appl. Polym. Sci., 85, 1408–1418 (2002)10.1002/app.10677Search in Google Scholar

Kim, S., Dealy, J. M., “Gross Melt Fracture of Polyethylene. I: A Criterion based on Tensile Stress”, Polym. Eng. Sci., 42, 482–494 (2002a)10.1002/pen.10965Search in Google Scholar

Kim, S., Dealy, J. M., “Gross Melt Fracture of Polyethylene. II: Effects of Molecular Structure”, Polym. Eng. Sci., 42, 485–503 (2002b)10.1002/pen.10966Search in Google Scholar

Lee, H. S., Denn, M. M., “Blends of Linear and Branched Polyethylenes”, Polym. Eng. Sci., 40, 1132–1142 (2000)10.1002/pen.11241Search in Google Scholar

Malmberg, A., et al., “Long-chain Branching in Metallocene-catalyzed Polyethylenes Investigated by Low Oscillatory Shear and Uniaxial Extensional Rheometry”, Macromolecules, 35, 1038–1048 (2002)10.1021/ma010753lSearch in Google Scholar

Migler, K. B., “Chapter 5 Sharkskin Instability in Extrusion, in Polymer Processing Instabilities: Control and Understanding”, Hatzikiriakos, S. G., Migler, K. B. (Eds.), Marcel Dekker, New York, 121–160 (2005)Search in Google Scholar

Münstedt, H., et al., “Correlation between Rheological Behavior in Uniaxial Elongation and Film Blowing Properties of Various Polyethylenes”, Rheol. Acta, 45, 14–22 (2005)10.1007/s00397-005-0435-6Search in Google Scholar

Pérez, R., et al., “Basic and Applied Rheology of m-LLDPE/LDPE Blends: Miscibility and Processing Features”, Polymer, 46, 8045–8053 (2005)10.1016/j.polymer.2005.06.087Search in Google Scholar

Ramamurthy, A. V., “Wall Slip in Viscous Fluids and Influence of Materials of Construction”, J. Rheol., 30, 337–357 (1986)10.1122/1.549852Search in Google Scholar

Sentmanat, M. L., U.S. Patent No. 6,578,413 (2003)Search in Google Scholar

Sentmanat, M., “Miniature Universal Testing Platform: From Extensional Melt Rheology to Solid State Deformation Behavior”, Rheol. Acta, 43, 657–699 (2004)10.1007/s00397-004-0405-4Search in Google Scholar

Sentmanat, M., et al., “Fingerprinting the Processing Behavior of Polyethylenes from Transient Extensional Flow and Peel Experiments in the Melt State”, Rheol. Acta, 44, 1–15 (2005)10.1007/s00397-004-0398-zSearch in Google Scholar

Utracki, L. A.: Polymer Alloys and Blends. Thermodynamics and Rheology, 3^rd Edition, Hanser Publishers, Munich (1989)Search in Google Scholar

Wagner, M. H., et al., “Quantitative Analysis of Melt Elongational Behavior of LLDPE/LDPE Blends”, Rheol. Acta, 44, 198–218 (2004)10.1007/s00397-004-0400-9Search in Google Scholar

Wei, X., et al., “Shear and Elongational Rheology of Polyethylenes with Different Molecular Characteristics I. Shear Rheology” J. Appl. Polym. Sci., 105, 309–316 (2007)10.1002/app.25724Search in Google Scholar

Wignall, G. D., et al., “Morphology of Blends of Linear and Short-Chain Branched Polyethylenes in the Solid State by Small-angle Neutron and X-ray Scattering, Differential Scanning Calorimetry, and Transmission Electron Microscopy”, Macromolecules, 33, 551–561 (2000)10.1021/ma9912655Search in Google Scholar

Wood-Adams, P., Dealy, J. M., “Using Rheological Data to Determine the Branching Level in Metallocene Polyethylenes” Macromolecules, 33, 7481–7488 (2000)10.1021/ma991534rSearch in Google Scholar

Wood-Adams, P., et al., “Effect of Molecular Structure on the Linear Viscoelastic Behavior of Polyethylene,” Macromolecules, 33, 7489–7499 (2000)10.1021/ma991533zSearch in Google Scholar

Wood-Adams, P., “The Effect of Long Chain Branching on the Shear Flow Behavior of Polyethylene” J. Rheol., 45, 203–210 (2001)10.1122/1.1332785Search in Google Scholar

Yamaguchi, M., Abe, S., “LLDPE/LDPE Blends. I. Rheological, Thermal and Mechanical Properties”, J. Appl. Polym. Sci., 74, 3153–3159 (1999)10.1002/(SICI)1097-4628(19991220)74:13<3153::AID-APP18>3.0.CO;2-TSearch in Google Scholar