Preparation of Foam from PVC Plastisol
-
N. Nakajima
Abstract
The results of physical measurements and microscopic observation are presented to elucidate material behaviour at each stage of the foam preparation from PVC plastisol for use as a part of the cushion flooring. The paper also describes how the problems were solved by overcoming contradicting requirements in the process.
References
Nakajima, N., Daniels, C. A., “Plastisols of Poly(Vinyl Chloride); Particle Size Distribution, Morphology, Rheology, and Mechanism of Aging”, J. Appl. Polym. Sci.25, p. 2019–2044 (1980)10.1002/app.1980.070250918Search in Google Scholar
Nakajima, N., et al., “Gelation and Fusion Mechanism of PVC Plastisols Observed by Changes of Morphology, Viscoelastic Properties, and Ultimate Mechanical Properties”, J. Macromol. Sci.-Phys., B20 (3), p. 349–364 (1981)10.1080/00222348108219447Search in Google Scholar
Nakajima, N., et al., “Dependence of Gelation and Fusion Behavior of Poly(vinyl chloride) Plastisols upon Particle Size and Size Distribution”, Polymer J.13, p. 955–965 (1981)10.1295/polymj.13.955Search in Google Scholar
Nakajima, N., Ward, D. W., “Gelation and Fusion Profiles of PVC Dispersion Resins in Plastisols”, J. Appl. Polym. Sci.28, p. 807–822 (1983)10.1002/app.1983.070280232Search in Google Scholar
Nakajima, N., et al., “Glass Transition and Gelation of PVC Resins in Plastisol”, J. Appl. Polym. Sci.32, p. 3749–3759 (1986)10.1002/app.1986.070320230Search in Google Scholar
Nakajima, N., et al., “Viscoelastic Measurements of PVC Plastisol during Gelation and Fusion”, Polymer Eng. Sci.19, p. 210–214 (1979)10.1002/pen.760190308Search in Google Scholar
© 2007, Carl Hanser Verlag, Munich
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- Characteristic Curves based on 3D Non-isothermal Flow Computations in Single-screw Extruder for Non-Newtonian Fluids
- Investigation on the Structure and Properties of Different PE Blown Films
- Influence of Mold Temperature on the Internal Structure and Creep Variation in the Thickness Direction of sPS Injection Moldings
- Preparation of Foam from PVC Plastisol
- Effects of Zinc Salts of Sulfonated Natural Rubber on Mechanical Properties, Morphology and Compatibility of Natural Rubber/Chlorosulfonated Polyethylene Blends
- Polypropylene-Clay Nanocomposites Fibers Structure and Performance
- Rapid Communications
- Constant Temperature Microfeature Embossing with Slowly Crystallizing Polymers
- PPS News
- PPS News
- Seikei-Kakou Abstracts
- Seikei-Kakou Abstracts
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- Characteristic Curves based on 3D Non-isothermal Flow Computations in Single-screw Extruder for Non-Newtonian Fluids
- Investigation on the Structure and Properties of Different PE Blown Films
- Influence of Mold Temperature on the Internal Structure and Creep Variation in the Thickness Direction of sPS Injection Moldings
- Preparation of Foam from PVC Plastisol
- Effects of Zinc Salts of Sulfonated Natural Rubber on Mechanical Properties, Morphology and Compatibility of Natural Rubber/Chlorosulfonated Polyethylene Blends
- Polypropylene-Clay Nanocomposites Fibers Structure and Performance
- Rapid Communications
- Constant Temperature Microfeature Embossing with Slowly Crystallizing Polymers
- PPS News
- PPS News
- Seikei-Kakou Abstracts
- Seikei-Kakou Abstracts
