Article
Licensed
Unlicensed Requires Authentication

Contents

Published/Copyright: March 26, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 22 Issue 4

Published Online: 2013-03-26
Published in Print: 2007-09-01

© 2007, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Characteristic Curves based on 3D Non-isothermal Flow Computations in Single-screw Extruder for Non-Newtonian Fluids
  5. Investigation on the Structure and Properties of Different PE Blown Films
  6. Influence of Mold Temperature on the Internal Structure and Creep Variation in the Thickness Direction of sPS Injection Moldings
  7. Preparation of Foam from PVC Plastisol
  8. Effects of Zinc Salts of Sulfonated Natural Rubber on Mechanical Properties, Morphology and Compatibility of Natural Rubber/Chlorosulfonated Polyethylene Blends
  9. Polypropylene-Clay Nanocomposites Fibers Structure and Performance
  10. Rapid Communications
  11. Constant Temperature Microfeature Embossing with Slowly Crystallizing Polymers
  12. PPS News
  13. PPS News
  14. Seikei-Kakou Abstracts
  15. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.0741

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Characteristic Curves based on 3D Non-isothermal Flow Computations in Single-screw Extruder for Non-Newtonian Fluids
  5. Investigation on the Structure and Properties of Different PE Blown Films
  6. Influence of Mold Temperature on the Internal Structure and Creep Variation in the Thickness Direction of sPS Injection Moldings
  7. Preparation of Foam from PVC Plastisol
  8. Effects of Zinc Salts of Sulfonated Natural Rubber on Mechanical Properties, Morphology and Compatibility of Natural Rubber/Chlorosulfonated Polyethylene Blends
  9. Polypropylene-Clay Nanocomposites Fibers Structure and Performance
  10. Rapid Communications
  11. Constant Temperature Microfeature Embossing with Slowly Crystallizing Polymers
  12. PPS News
  13. PPS News
  14. Seikei-Kakou Abstracts
  15. Seikei-Kakou Abstracts
Downloaded on 13.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.0741/html
Scroll to top button