Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Contents

Published/Copyright: July 31, 2017
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 32 Issue 4

Published Online: 2017-07-31
Published in Print: 2017-08-11

© 2017, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Validation of an In-Mold Multivariate Sensor for Measurement of Melt Temperature, Pressure, Velocity, and Viscosity
  5. Effect of Welding Parameters on Microstructure and Tensile Strength of Friction Stir Welded PA 6,6 Joints
  6. Numerical Modelling of the Non-Isothermal Flow of a Non-Newtonian Polymer in a Co-Kneader
  7. Investigations on Blending and Foaming Behavior of Styrene-Ethylene-Butylene-Styrene/Polystyrene Blends
  8. Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study
  9. An Integration of Microstructure Predictions and Structural Analysis in Long-Fiber-Reinforced Composite with Experimental Validation
  10. Investigations on Tightness of Polymer-Metal Hybrids in Environments with Thermal, Media, and Mechanical Loads
  11. In Silico Study of Polymer Sheet Drying Process
  12. 3D Simulation of Nanostructures Replication via Injection Molding
  13. Mathematical Modelling of Vibration Response Characteristics for Dissimilar Hot Plate Welded Polyamide 6 Composite Beams
  14. Mathematical Modeling of Electrically Charged Viscoelastic Jet
  15. Optimization of Parameters for Electrospinning of Polyacrylonitrile Nanofibers by the Taguchi Method
  16. Synthesis of a Conducting Nanocomposite by Intercalative Copolymerisation of Furan and Aniline in Montmorillonite
  17. PPS News
  18. PPS News
  19. Seikei Kakou Abstracts
  20. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.017042

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Validation of an In-Mold Multivariate Sensor for Measurement of Melt Temperature, Pressure, Velocity, and Viscosity
  5. Effect of Welding Parameters on Microstructure and Tensile Strength of Friction Stir Welded PA 6,6 Joints
  6. Numerical Modelling of the Non-Isothermal Flow of a Non-Newtonian Polymer in a Co-Kneader
  7. Investigations on Blending and Foaming Behavior of Styrene-Ethylene-Butylene-Styrene/Polystyrene Blends
  8. Influence of Melt Compounding on Blast Furnace Slag Filled PP Compounds: A Comparative Study
  9. An Integration of Microstructure Predictions and Structural Analysis in Long-Fiber-Reinforced Composite with Experimental Validation
  10. Investigations on Tightness of Polymer-Metal Hybrids in Environments with Thermal, Media, and Mechanical Loads
  11. In Silico Study of Polymer Sheet Drying Process
  12. 3D Simulation of Nanostructures Replication via Injection Molding
  13. Mathematical Modelling of Vibration Response Characteristics for Dissimilar Hot Plate Welded Polyamide 6 Composite Beams
  14. Mathematical Modeling of Electrically Charged Viscoelastic Jet
  15. Optimization of Parameters for Electrospinning of Polyacrylonitrile Nanofibers by the Taguchi Method
  16. Synthesis of a Conducting Nanocomposite by Intercalative Copolymerisation of Furan and Aniline in Montmorillonite
  17. PPS News
  18. PPS News
  19. Seikei Kakou Abstracts
  20. Seikei-Kakou Abstracts
Downloaded on 16.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.017042/html
Scroll to top button