Seikei-Kakou Abstracts

Articles in the same Issue

1. Contents
2. Contents
3. Regular Contributed Articles
4. Structural and Antibacterial Properties of PP/CuO Composite Filaments Having Different Cross Sectional Shapes
5. Effects of Accelerated Weathering in Polylactide Biocomposites Reinforced with Microcrystalline Cellulose
6. Using Forest Resources to Develop High Performance Plastic Compounds for the Automotive Industry
7. Coagent Modified Polypropylene Prepared by Reactive Extrusion: A New Look into the Structure-Property Relations of Injection Molded Parts
8. Numerical Simulation of the Injection Blow Molding Single Stage Process: Shaping of Two Different Geometries and Comparison with Experimental Thickness Measurements
9. Effects of Montmorillonite Content and Maleic Anhydride Compatibilization on the Mechanical Behavior of Polylactide Nanocomposites
10. Effect of Coupling Agent and Ground Tire Rubber Content on the Properties of Natural Fiber Polymer Composites
11. Influence of Blending Protocol on the Thermal and Mechanical Properties of HDPE/LLDPE Blend-Based Nanocomposites
12. Effect of Brominated Epoxy Resins on the Thermal Stability and Flame Retardancy of Long-Glass-Fiber Reinforced Polyamide 6
13. Machining Optimization of HDPE Pipe Using the Taguchi Method and Grey Relational Analysis
14. Evaluation and Optimization of Electrospun Polyvinyl Alcohol Fibers via Taguchi Methodology
15. Matrix Degradation during High Speed Extrusion of Polypropylene/Clay Nanocomposites – Influence on Filler Dispersion
16. Processing of Metallic Pigments in a Co-Rotating Twin-Screw Extruder Studied by Means of Dielectric Analysis and Terahertz Spectroscopy
17. PPS News
18. PPS News
19. Seikei Kakou Abstracts
20. Seikei-Kakou Abstracts