Contents

Artikel in diesem Heft

1. Contents
2. Contents
3. Regular Contributed Articles
4. Research and Application of Wireless Temperature Measurement Device in High Temperature Enclosed Environment
5. Influence on Product Quality by pvT-Optimised Processing in Injection Compression Molding
6. Effect of Plug Temperature on the Strain and Thickness Distribution of Components Made by Plug Assist Thermoforming
7. Influence of Processing Parameters and Composition on the Effective Compatibilization of Polypropylene–Poly(ethylene terephthalate) Blends
8. Impact Modification of Isotactic Polypropylene with Ethylene-Propylene Diene Monomer Rubber
9. Impact Behavior of Continuous Biaxial Reinforced Composites Based on Bio-Polyamides and Man-Made Cellulose Fibres
10. Preparation and Anti-Fouling Property of Acryloylmorpholine-Grafted PVDF Membrane: The Effect of Cross-Linking Agent
11. Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process
12. Fracture Toughness of PP/EPDM/Nano-Ternary Composites: The Role of Distribution of Inorganic Particles
13. CO₂ Laser Ablation of Microchannel on PMMA Substrate for Effective Fabrication of Microfluidic Chips
14. A Novel Micro Wall Slip Model Based on Chain Length and Temperature
15. Electrical and Mechanical Properties of Antistatic Poly(vinyl chloride) Composites Filled with Silver Plated Hollow Glass Microspheres
16. Prototype System to Study the Effect of Weld Lines on the Performance of Extruded Profiles
17. Extrudate Swell of High Density Polyethylenes in Slit (Flat) Dies
18. PPS News
19. PPS News
20. Seikei Kakou Abstracts
21. Seikei-Kakou Abstracts