Home PPS News
Article
Licensed
Unlicensed Requires Authentication

PPS News

Published/Copyright: March 2, 2016
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 31 Issue 1

Published Online: 2016-03-02
Published in Print: 2016-03-02

© 2016, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Influence of Melt-Mixing Process Conditions on Mechanical Performance of Organoclay/Fluoroelastomer Nanocomposites
  5. Melt Creep Recovery of Polyamide 6 and Polypropylene Nanocomposites Blended with Layered Silicate
  6. Dielectric Behavior of OPEFB Reinforced Polycaprolactone Composites at X-Band Frequency
  7. Numerical Modeling of Bubble Growth in Microcellular Polypropylene Produced in a Core-Back Injection Process Using Chemical Blowing Agents
  8. Numerical Simulation and Experimental Validation of Granite Powder Filled Jute Epoxy Composite for Slurry Jet Erosive Wear
  9. Rheological Modeling of Polymeric Melts in Extruders upon Two-Dimensional Shear Flow
  10. Experimental Investigation on Curing Stress in Polymer Composite Using Digital Gradient Sensing Technique
  11. Experimental and Numerical Investigation of Shrinkage and Warpage of a U-Shaped Injection Molded Part
  12. Modeling for Starve Fed/Flood Fed Mixing Single-Screw Extruders
  13. The Comparative Study of Different Mixing Methods for Microcrystalline Cellulose/Polyethylene Composites
  14. Fabrication of Superhydrophobic Polyethylene Parts by Rotomolding
  15. Numerical Simulation of Chaotic Mixing in Single Screw Extruders with Different Baffle Heights
  16. PPS News
  17. PPS News
  18. Seikei Kakou Abstracts
  19. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.016014

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Influence of Melt-Mixing Process Conditions on Mechanical Performance of Organoclay/Fluoroelastomer Nanocomposites
  5. Melt Creep Recovery of Polyamide 6 and Polypropylene Nanocomposites Blended with Layered Silicate
  6. Dielectric Behavior of OPEFB Reinforced Polycaprolactone Composites at X-Band Frequency
  7. Numerical Modeling of Bubble Growth in Microcellular Polypropylene Produced in a Core-Back Injection Process Using Chemical Blowing Agents
  8. Numerical Simulation and Experimental Validation of Granite Powder Filled Jute Epoxy Composite for Slurry Jet Erosive Wear
  9. Rheological Modeling of Polymeric Melts in Extruders upon Two-Dimensional Shear Flow
  10. Experimental Investigation on Curing Stress in Polymer Composite Using Digital Gradient Sensing Technique
  11. Experimental and Numerical Investigation of Shrinkage and Warpage of a U-Shaped Injection Molded Part
  12. Modeling for Starve Fed/Flood Fed Mixing Single-Screw Extruders
  13. The Comparative Study of Different Mixing Methods for Microcrystalline Cellulose/Polyethylene Composites
  14. Fabrication of Superhydrophobic Polyethylene Parts by Rotomolding
  15. Numerical Simulation of Chaotic Mixing in Single Screw Extruders with Different Baffle Heights
  16. PPS News
  17. PPS News
  18. Seikei Kakou Abstracts
  19. Seikei-Kakou Abstracts
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 6.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.016014/pdf
Scroll to top button