Third of a Series: Pioneering Polymer Industry Developments — The First Successful Mathematical-Computer Modeling of A Complex Industrial Process: Toyobo and Melt Spinning

Articles in the same Issue

1. Editorial
2. Third of a Series: Pioneering Polymer Industry Developments — The First Successful Mathematical-Computer Modeling of A Complex Industrial Process: Toyobo and Melt Spinning
3. Screw Extrusion / Mixing
4. Polymer Flow Velocity in the Helical Channel in Dependence of a Coordinate System
5. Non-Isothermal Transient Startup of A Starved Flow Modular Co-Rotating Twin Screw Extruder
6. Numerical Simulations and Experiments in a Double-Couette Flow Geometry
7. Dynamic Analysis of Melting in Injection Extruder
8. Extrusion Die
9. Production of Pipe with Uniform Wall Thickness: How to Compensate for Gravity Sag
10. Fiber and Film
11. Assessment of LDPE Melt Strength by Use of Rheotens Mastercurves
12. Molding
13. Analysis of Flow and Heat Transfer in Liquid Composite Molding
14. Solidification Criterion on Shrinkage Predictions for Semi-crystalline Injection Moulded Samples
15. Polymer Melt Rheology at High Shear Rates
16. Factors Affecting the Stability of Gas Penetration in Gas Assist Injection Molded Bifurcation Parts
17. Transient Polymer Flow Rate in Injection Mold Filling
18. Flow Analysis of Injection-Press Molding Process
19. Properties of Injection Molded In Situ Composites Based on PPS and a Melt Processable Glass
20. A New Approach in Offline-Optimization of the Injection Molding Process