Article Open Access

Fabrication of highly porous merwinite scaffold using the space holder method

  • and
Published/Copyright: September 7, 2020
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 111 Issue 9

Received: 2019-11-06
Accepted: 2020-05-30
Published Online: 2020-09-07
Published in Print: 2020-09-16

© 2020, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Welcome to Prof. Joachim Bill as a new editor for IJMR
  5. Original Contributions
  6. Fabrication of highly porous merwinite scaffold using the space holder method
  7. Improvement of AISI 4340 steel properties by intermediate quenching – microstructure, mechanical properties, and fractography
  8. Hardness and corrosion properties of functionally graded AA5083/Al2O3 composites produced by powder metallurgy method
  9. Production and properties of functionally graded hybrid composites containing Al3Ti and TiB2
  10. Experimental measurement and thermodynamic model predictions of the distributions of Cu, As, Sb and Sn between liquid lead and PbO–FeO–Fe2O3–SiO2 slag
  11. Effect of Co substitution on the magnetic properties and magnetocaloric effects of Ni–Co–Mn–Sn alloys
  12. Effect of the synthesis parameters on the structural and magnetic properties of strontium hexaferrite synthesized via the Pechini method
  13. Investigation on microstructural and mechanical properties of sub-zero processed AISI 440C steel
  14. Effects of rail flash-butt welding and post-weld heat treatment processes meeting different national standards on residual stresses of welded joints
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.111937
Keywords for this article
Merwinite; Scaffold; Porous bioceramic; Sol-gel processes; Space holder method
Creative Commons
BY 4.0

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Welcome to Prof. Joachim Bill as a new editor for IJMR
  5. Original Contributions
  6. Fabrication of highly porous merwinite scaffold using the space holder method
  7. Improvement of AISI 4340 steel properties by intermediate quenching – microstructure, mechanical properties, and fractography
  8. Hardness and corrosion properties of functionally graded AA5083/Al2O3 composites produced by powder metallurgy method
  9. Production and properties of functionally graded hybrid composites containing Al3Ti and TiB2
  10. Experimental measurement and thermodynamic model predictions of the distributions of Cu, As, Sb and Sn between liquid lead and PbO–FeO–Fe2O3–SiO2 slag
  11. Effect of Co substitution on the magnetic properties and magnetocaloric effects of Ni–Co–Mn–Sn alloys
  12. Effect of the synthesis parameters on the structural and magnetic properties of strontium hexaferrite synthesized via the Pechini method
  13. Investigation on microstructural and mechanical properties of sub-zero processed AISI 440C steel
  14. Effects of rail flash-butt welding and post-weld heat treatment processes meeting different national standards on residual stresses of welded joints
  15. DGM News
  16. DGM News
Downloaded on 13.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.111937/html
Scroll to top button