Home Thermodynamic re-assessment of the binary Cr–Ta system down to 0 K
Article Open Access

Thermodynamic re-assessment of the binary Cr–Ta system down to 0 K

  • Yuxun Jiang , Setareh Zomorodpoosh , Irina Roslyakova and Lijun Zhang
Published/Copyright: August 22, 2019
Download Article (PDF)
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 110 Issue 9

Received: 2019-01-10
Accepted: 2019-03-23
Published Online: 2019-08-22
Published in Print: 2019-09-16

© 2019, Carl Hanser Verlag, München

Articles in the same Issue

  1. Original Contributions
  2. Thermodynamic re-assessment of the binary Cr–Ta system down to 0 K
  3. Thermodynamic analysis of precipitation behavior of M23C6 carbide in Nimonic 105 superalloy
  4. Texture evolution of magnesium alloy AZ31 during high temperature tensile deformation
  5. Effect of reciprocating extrusion temperature and passes on the microstructural evolution of Mg-5Sn-1Si-0.8Y alloy
  6. Constitutive modeling of flow behavior of CuZn39Pb2 alloy under hot working conditions
  7. The effect of austempering on the microstructure and mechanical properties of PM Fe-0.8c steel aloyed with copper and nickel
  8. Enhancing the microstructure and grain refining performance of Al-5Ti-1B master alloy by a gas atomization process
  9. Aging response investigation of 2017 Al alloy processed by gravity and squeeze casting
  10. Die-casting aluminum alloys for high-efficiency thermal radiation components
  11. Wear and corrosion of in-situ formed Al3Zr aluminide reinforced Al3003 surface composite
  12. Magnesium aluminate spinel ceramics infiltrated with lanthanum-glass for dental applications
  13. Short Communications
  14. Influence of pre-rolling on microstructural evolution of non-basal textured magnesium alloy
https://doi.org/10.3139/146.111812
Keywords for this article
Cr–Ta; Thermodynamics; CALPHAD; Heat capacity; 0 K
Creative Commons
BY 4.0

Articles in the same Issue

  1. Original Contributions
  2. Thermodynamic re-assessment of the binary Cr–Ta system down to 0 K
  3. Thermodynamic analysis of precipitation behavior of M23C6 carbide in Nimonic 105 superalloy
  4. Texture evolution of magnesium alloy AZ31 during high temperature tensile deformation
  5. Effect of reciprocating extrusion temperature and passes on the microstructural evolution of Mg-5Sn-1Si-0.8Y alloy
  6. Constitutive modeling of flow behavior of CuZn39Pb2 alloy under hot working conditions
  7. The effect of austempering on the microstructure and mechanical properties of PM Fe-0.8c steel aloyed with copper and nickel
  8. Enhancing the microstructure and grain refining performance of Al-5Ti-1B master alloy by a gas atomization process
  9. Aging response investigation of 2017 Al alloy processed by gravity and squeeze casting
  10. Die-casting aluminum alloys for high-efficiency thermal radiation components
  11. Wear and corrosion of in-situ formed Al3Zr aluminide reinforced Al3003 surface composite
  12. Magnesium aluminate spinel ceramics infiltrated with lanthanum-glass for dental applications
  13. Short Communications
  14. Influence of pre-rolling on microstructural evolution of non-basal textured magnesium alloy
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 12.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111812/html
Scroll to top button