Manufacturing of functionally graded metal matrix composite materials by segregation

Articles in the same Issue

1. Contents
2. Contents
3. Original Contributions
4. Manufacturing of functionally graded metal matrix composite materials by segregation
5. Indenter size effect in high-pressure torsion deformed Pd-based metallic glass
6. Investigation of the effect of bath temperature on the bath–freeze lining interface temperature in the CuO_x–FeO_y–MgO–SiO₂ system at copper metal saturation
7. Decomposition of Al₄O₄C in the presence of C at high temperatures in vacuum
8. Optical and magnetic properties of diluted magnetic semiconductor Zn_0.95M_0.05S nanorods prepared by a hydrothermal method
9. Structural, magnetic and optical properties of Al-substituted nickel ferrite nanoparticles
10. Effect of processing parameters on microstructural and mechanical properties of aluminum–SiO₂ nanocomposites produced by spark plasma sintering
11. Sn-bonded LaFe_11.6Si_1.4H_y magnetocaloric composites with a 3-d Ni-coating steel substrate formed by hot-pressing
12. Effect of laser energy density on microstructures and mechanical properties of selective laser melted Ti-6Al-4V alloy
13. Structure and corrosion resistance of titanium oxide layers produced on NiTi alloy in low-temperature plasma
14. Severe shot peening of AISI 321 with 1 000 % and 1 300 % coverages: A comparative study on the surface nanocrystallization, phase transformation, sub-surface microcracks, and microhardness
15. Abrasive wear resistance of modified X37CrMoV5-1 hot work tool steel after conventional and laser heat treatment
16. Effect of coupled annular electromagnetic stirring and intercooling on the microstructures, macrosegregation and properties of large-sized 2219 aluminum alloy billets
17. People
18. Otmar Vöhringer on the occasion of his 80^th birthday
19. In Memory of Lasar Simhovich Shvindlerman (September 20^th, 1935–March 3^rd, 2018)
20. In Memory of Prof. Dr.-Ing. Heinrich Wollenberger
21. DGM News
22. DGM News