Home First principles, thermal stability and thermodynamic assessment of the binary Ni–W system
Article Open Access

First principles, thermal stability and thermodynamic assessment of the binary Ni–W system

  • Iikka Isomäki , Marko Hämäläinen , Maria H. Braga and Michael Gasik
Published/Copyright: November 25, 2017
Download Article (PDF)
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 108 Issue 12

Received: 2016-10-28
Accepted: 2017-07-10
Published Online: 2017-11-25
Published in Print: 2017-12-08

© 2017, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. First principles, thermal stability and thermodynamic assessment of the binary Ni–W system
  5. Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding
  6. FSW of bimodal reinforced Al-based composites produced via spark plasma sintering
  7. Modelling analysis and experiments of polycrystalline silicon directional solidification in an annular heating field
  8. Effect of flow, heat transfer and magnetic energy on the grain refinement of 7A04 alloy under electromagnetic pulse
  9. A study on effects of a new two-step strain induced melt activation process on characteristics of Al 7075 alloy
  10. Synthesis and characterization of mechanically alloyed cerium oxide reinforced Al-4.5Mg alloy composite
  11. Densification rate and interfacial adhesion of bilayer cemented tungsten carbide and steel
  12. Short Communications
  13. Cavitation erosion of 17-4 PH stainless steels following sub-zero treatment
  14. Investigation on microstructure and thermal properties of in-situ synthesized Cu–ZrO2 nanocomposites
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.111557
Keywords for this article
Nickel; Tungsten; CALPHAD; First principles; Thermodynamic properties
Creative Commons
BY 4.0

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. First principles, thermal stability and thermodynamic assessment of the binary Ni–W system
  5. Experimental evaluation of forming limit diagram and mechanical properties of nano/ultra-fine grained aluminum strips fabricated by accumulative roll bonding
  6. FSW of bimodal reinforced Al-based composites produced via spark plasma sintering
  7. Modelling analysis and experiments of polycrystalline silicon directional solidification in an annular heating field
  8. Effect of flow, heat transfer and magnetic energy on the grain refinement of 7A04 alloy under electromagnetic pulse
  9. A study on effects of a new two-step strain induced melt activation process on characteristics of Al 7075 alloy
  10. Synthesis and characterization of mechanically alloyed cerium oxide reinforced Al-4.5Mg alloy composite
  11. Densification rate and interfacial adhesion of bilayer cemented tungsten carbide and steel
  12. Short Communications
  13. Cavitation erosion of 17-4 PH stainless steels following sub-zero treatment
  14. Investigation on microstructure and thermal properties of in-situ synthesized Cu–ZrO2 nanocomposites
  15. DGM News
  16. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 16.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111557/html
Scroll to top button