Home The effect of annealing temperature on the corrosion behavior of silver alloyed 2205 duplex stainless steel
Article
Licensed
Unlicensed Requires Authentication

The effect of annealing temperature on the corrosion behavior of silver alloyed 2205 duplex stainless steel

  • Dong-Yih Lin , Yu-Feng Liu , Chun-Hung Chen , Yi-Chun Chen , Wei-Ping Huang , Sheng-Min Yang and Huei-Sen Wang
Published/Copyright: March 8, 2014
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 105 Issue 3

Abstract

Silver-containing 2205 duplex stainless steel is used as an anti-bacterial material in the food industry and hospitals. 2205 duplex stainless steel has excellent corrosion resistance, high strength, and superior workability due to it having austenite (γ) and ferrite (δ). In this work, a quantitative analysis was carried out to estimate the effect of annealing temperature on the phase transformation of 0.1 wt.% Ag alloyed 2205 duplex stainless steel. Results show that the sigma (σ) phase was precipitated at the δ/γ interface and that the grain size increased with increasing heating temperature. The maximum volume fraction of σ phase was observed at 875 °C. The effects of the heat treatment induced constituent phases on the corrosion behavior of silver alloyed 2205 duplex stainless steel were also evaluated by means of electrochemical measurements.

Keywords: 2205 duplex stainless steel; Silver addition; Corrosion; Sigma (σ) phase
* Correspondence address, Prof. Dong-Yih Lin (Dr.-Ing.), Department of Chemical & Materials Engineering, National University of Kaohsiung (NUK), Kaohsiung, Taiwan, Province of China, Tel.:+886-7-5919739, E-mail:

References

[1] F.Dupoiron, J.P.Audouard: Scand. J. Metall.25 (1996) 95–102.Search in Google Scholar

[2] D.E.Nelson, W.A.BaeslackIII, J.C.Lippold: Mater. Charact.39 (1997) 467–477. 10.1016/S1044-5803(97)00140-XSearch in Google Scholar

[3] M.Miura, M.Koso, T.Kudo, H.Tsuge: Weld. Int.4 (1990) 200–206. 10.1080/09507119009447706Search in Google Scholar

[4] T.Kudo, H.Tsuge, T.Moroishi: Corrosion45 (1989) 831–838. 10.5006/1.3584990Search in Google Scholar

[5] H.D.Solomon, T.M.Devine, in: Proc. Duplex Stainless Steel Conf., ASM, Metals Park, Ohio (1983) 693.Search in Google Scholar

[6] T.Yokota, M.Tochihara, M.Ohta: Kawasaki Steel Technical Report-English Edition (2002) 37–41.Search in Google Scholar

[7] W.C.Chiang, I.Tseng, P.Møller, L.R.Hilbert, T.Tolker-Nielsen, J.K.Wu: Mater. Chem. Phys.119 (2010) 123–130. 10.1016/j.matchemphys.2009.08.035Search in Google Scholar

[8] K.H.Liao, K.L.Ou, H.C.Cheng, C.T.Lin, P.W.Peng: Appl. Surf. Sci.256 (2010) 3642–3646. 10.1016/j.apsusc.2010.01.001Search in Google Scholar

[9] M.Femenia, J.Pan, C.Leygraf, P.Luukkonen: Corros. Sci.43 (2001) 1939–1951. 10.1016/S0010-938X(00)00180-3Search in Google Scholar

[10] Y.H.Yau, M.A.Streicher: Corrosion43 (1987) 366–373. 10.5006/1.3583872Search in Google Scholar

[11] R.A.Perren, T.A.Suter, P.J.Uggowitzer, L.Weber, R.Magdowski, H.Böhni, M.O.Speidel: Corros. Sci.43 (2001) 707–726. 10.1016/S0010-938X(00)00087-1Search in Google Scholar

[12] C.M.Abreu, M.J.Cristóbal, R.Losada, X.R.Nóvoa, G.Pena, M.C.Pérez: Electrochim. Acta.49 (2004), 3049–3056. 10.1016/j.electacta.2004.01.064Search in Google Scholar

[13] K.Y.Kim, P.Q.Zhang, T.H.Ha, Y.H.Lee: Corrosion54 (1998) 910–921. 10.5006/1.3284810Search in Google Scholar

[14] E.Jackson, P.Visser, L.A.Cornish: Mater. Charact.31 (1993) 185–190. 10.1016/1044-5803(93)90060-9Search in Google Scholar

[15] S.K.Kim: Mater. Sci. Eng. A449 (2007) 752–755. 10.1016/j.msea.2006.02.451Search in Google Scholar

[16] B.Soylu, R.W.K.Honeycombe: Mater. Sci. Technol.7 (1991) 137–146. 10.1179/026708391790182980Search in Google Scholar

[17] M.B.Cortie, E.Jackson: Metall. Mater. Trans. A28 (1997) 2477–2484. 10.1007/s11661–997–0005-xSearch in Google Scholar

[18] I.F.Machado, A.F.Padilha: ISIJ Int.40 (2000) 719–724. 10.2355/isijinternational.40.719Search in Google Scholar

[19] J.W.Elmer, T.A.Palmer, E.D.Specht: Sci. Eng. A459 (2007) 151–155. 10.1016/j.msea.2007.01.071Search in Google Scholar

[20] E.Symniotis: Corrosion46 (1990) 2–12. 10.5006/1.3585062Search in Google Scholar

[21] I.H.Lo, Y. F. C.J.Lin, W.T.Tsai: Corros. Sci.48 (2006) 696–708. 10.1016/j.corsci.2005.02.004Search in Google Scholar

Received: 2013-05-05
Accepted: 2013-08-29
Published Online: 2014-03-08
Published in Print: 2014-03-11

© 2014, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Twinning dislocation and twin propagation process in a nickel-base single crystal TMS-82 superalloy
  5. Relationship between austenite stability and martensite formation in modified 9Cr-1Mo steel
  6. The influence of brazing temperature and surface roughness on the wettability of reactive brazing alloys
  7. Thermodynamic modelling of the “Cu2O”–SiO2, “Cu2O”– CaO, and “Cu2O”– CaO – SiO2 systems in equilibrium with metallic copper
  8. The effect of annealing temperature on the corrosion behavior of silver alloyed 2205 duplex stainless steel
  9. Effect of rate of deformation on electromagnetic radiation during quasi-static compression of sintered aluminium preforms
  10. Temperature effect on decorative gold coatings obtained from electrolyte based on mercaptotriazole – comparison with cyanide
  11. High-strength and thermally stable Al – CeO2 composite produced by means of mechanical alloying
  12. Enhancing photocatalytic activity of ZnO nanostructures by doping with Ce+4 ions prepared in water using ultrasonic irradiation
  13. Modified hyperbranched epoxy/clay nanocomposites: A study on thermal, antimicrobial and biodegradation properties
  14. Short Communications
  15. Synthesis of carnallite crystal from KCl – MgCl2 solutions and its characterization
  16. Microwave synthesis of ultrafine and nanosized powders of tungsten oxide and carbide
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.111021
Keywords for this article
2205 duplex stainless steel; Silver addition; Corrosion; Sigma (σ) phase

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Twinning dislocation and twin propagation process in a nickel-base single crystal TMS-82 superalloy
  5. Relationship between austenite stability and martensite formation in modified 9Cr-1Mo steel
  6. The influence of brazing temperature and surface roughness on the wettability of reactive brazing alloys
  7. Thermodynamic modelling of the “Cu2O”–SiO2, “Cu2O”– CaO, and “Cu2O”– CaO – SiO2 systems in equilibrium with metallic copper
  8. The effect of annealing temperature on the corrosion behavior of silver alloyed 2205 duplex stainless steel
  9. Effect of rate of deformation on electromagnetic radiation during quasi-static compression of sintered aluminium preforms
  10. Temperature effect on decorative gold coatings obtained from electrolyte based on mercaptotriazole – comparison with cyanide
  11. High-strength and thermally stable Al – CeO2 composite produced by means of mechanical alloying
  12. Enhancing photocatalytic activity of ZnO nanostructures by doping with Ce+4 ions prepared in water using ultrasonic irradiation
  13. Modified hyperbranched epoxy/clay nanocomposites: A study on thermal, antimicrobial and biodegradation properties
  14. Short Communications
  15. Synthesis of carnallite crystal from KCl – MgCl2 solutions and its characterization
  16. Microwave synthesis of ultrafine and nanosized powders of tungsten oxide and carbide
  17. DGM News
  18. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 8.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111021/html
Scroll to top button