Microwave absorbing materials based on polyaniline composites: a review
-
Yanmin Wang
Abstract
Conductive polymers are widely studied as microwave absorbing materials due to their light weight, corrosion resistance, good and flexible processibility and variability of conductivity. Among them, polyaniline (PANI) microwave absorbing materials have been studied most extensively because of their easier and inexpensive preparation methods, good environmental stability in both doped and undoped forms, excellent physical and chemical properties, high conductivity at microwave frequencies and unique doping mechanism with its ease of protonic acid doping in the emeraldine form. In this paper, the preparation and the microwave properties of PANI/inorganics composites and PANI/insulating polymer composites are thoroughly reported.
References
[1] D.John, M.Washington: Aviat. Week Space Technol. 129 (1988) 28.Suche in Google Scholar
[2] Y.Duan, S.Liu, H.Guan: Sci. Technol. Adv. Mater. 6 (2005) 513. 10.1016/j.stam.2005.01.002Suche in Google Scholar
[3] A.Kaynak: Mater. Res. Bull. 31 (1996) 845. 10.1016/0025-5408(96)00038-4Suche in Google Scholar
[4] R.Faez, I.M.Martin, M.-A.De Paoli, M.C.Rezende: Synth. Met. 119 (2001) 435. 10.1016/S0379-6779(00)01283-2Suche in Google Scholar
[5] S.K.Dhawan, N.Singh, D.Rodrigues: Sci. Technol. Adv. Mater. 4 (2003) 105. 10.1016/S1468-6996(02)00053-0Suche in Google Scholar
[6] S.E.Bourdo, T.Viswanathan: Carbon43 (2005) 2983. 10.1016/j.carbon.2005.06.016Suche in Google Scholar
[7] T.M.Wu, Y.W.Lin: Polymer47 (2006) 3576. 10.1016/j.polymer.2006.03.060Suche in Google Scholar
[8] G.Wu, L.Li, J.H.Li, B.Q.Xu: Carbon200543, 2579. 10.1016/j.carbon.2004.09.024Suche in Google Scholar
[9] S.Sathiyanarayanan, S.S.Azim, G.Venkatachari: Electrochim. Acta52 (2007) 2068. 10.1016/j.electacta.2006.08.022Suche in Google Scholar
[10] K.H.Wu, T.H.Ting, G.P.Wang, W.D.Ho, C.C.Shih: Polym. Degrad. Stab. 93 (2008) 483. 10.1016/j.polymdegradstab.2007.11.009Suche in Google Scholar
[11] D.-X.Yu, M.-T.Chen, P.-H.Pi, X.-F.Wen, J.Cheng, Z.-R.Yang: J. Chem. Eng. Chin. Univ. 23 (2009) 148. 10.1016/S1005-9040(07)60031-2Suche in Google Scholar
[12] P.Saini, V.Choudhary, B.P.Singh, R.B.Mathur, S.K.Dhawa: Mater. Chem. Phys. 113 (2009) 919. 10.1016/j.matchemphys.2008.08.065Suche in Google Scholar
[13] Z.Wang, H.Bi, J.Liu, T.Sun, X.Wu: J. Magn. Magn. Mater. 320 (2008) 2132. 10.1016/j.jmmm.2007.05.023Suche in Google Scholar
[14] P.Xu, X.Han, J.Jiang, X.Wang, X.Li, A.Wen: J. Phys. Chem. C111 (2007) 12603. 10.1063/1.4729370Suche in Google Scholar PubMed
[15] T.-H.Ting, K.-H.Wu: J. Magn. Magn. Mater. 322 (2010) 2160. 10.1016/j.jmmm.2010.02.002Suche in Google Scholar
[16] X.Tang, Y.Yang: Appl. Surf. Sci. 255 (2009) 9381. 10.1016/j.apsusc.2009.07.040Suche in Google Scholar
[17] R.T.Ma, H.T.Zhao, G.Zhang: Mater. Res. Bull. 45 (2010) 1064. 10.1016/j.materresbull.2010.04.009Suche in Google Scholar
[18] K.H.Wu, T.H.Ting, G.P.Wang, C.C.Yang, C.W.Tsai: Synth. Met. 158 (2008) 688. 10.1016/j.synthmet.2008.04.013Suche in Google Scholar
[19] H.-T.Zhao, X.-D.Sun, Z.-M.Xiu, G.Zhang, X.-K.: J. Funct. Mater. 38 (2007) 1251.Suche in Google Scholar
[20] M.A.Soto-Oviedo, O.A.Araújo, R.Faez, M.C.Rezende, M.-A.De Paoli: Synth. Met. 156 (2006) 1249. 10.1016/j.synthmet.2006.09.003Suche in Google Scholar
[21] X.Han, Y.-S.Wang: Phys. Scr. T129 (2007) 335.10.1088/0031-8949/2007/T129/074Suche in Google Scholar
[22] X.Han, Y.-S.Wang: J. Funct. Mater. Devices13 (2007) 529.Suche in Google Scholar
[23] P.Wang, Q.Wang, J.Wang, G.Qiu, J.Fan, C.Zhou: Acta Polym. Sin. 9 (2006) 1100.Suche in Google Scholar
[24] D.-L.Zhao, X.-W.Zeng, Z.-M.Shen: Acta Phys. Sin. 54 (2005) 3878.10.7498/aps.54.3878Suche in Google Scholar
[25] P.Saini, V.Choudhary, K.N.Sood, S.K.Dhawan: J. Appl. Polym. Sci. 113 (2009) 3146. 10.1002/app.30183Suche in Google Scholar
[26] K.Singh, A.Ohlan, A.K.Bakhshi, S.K.Dhawan: Mater. Chem. Phys. 119 (2010) 201. 10.1016/j.matchemphys.2009.08.060Suche in Google Scholar
[27] A.Ohlan, K.Singh, A.Chandra, V.N.Singh, S.K.Dhawan: J. Appl. Phys. 106 (2009) 044305. 10.1063/1.3200958Suche in Google Scholar
[28] X.L.Dong, X.F.Zhang, H.Huang, F.Zuo: Appl. Phys. Lett. 92 (2008) 013127. 10.1063/1.2830995Suche in Google Scholar
[29] C.L.Yuan, Y.S.Hong: J. Mater. Sci. 45 (2010) 3470. 10.1007/s10853-010-4375-xSuche in Google Scholar
[30] S.W.Phang, M.Tadokoro, J.Watanabe, N.Kuramoto: Curr. Appl. Phys. 8 (2008) 391. 10.1016/j.cap.2007.10.022Suche in Google Scholar
[31] S.W.Phang, M.Tadokoro, J.Watanabe, N.Kuramoto: Synth. Met. 158 (2008) 251. 10.1016/j.synthmet.2008.01.012Suche in Google Scholar
[32] S.W.Phang, N.Kuramoto: Polym. Compos. 31 (2010) 516.10.1002/pc.20838Suche in Google Scholar
[33] B.K.Sharma, N.Khare, R.Sharma, S.K.Dhawan, V.D.Vankar, H.C.Gupta: Compos. Sci. Technol. 69 (2009) 1932. 10.1016/j.compscitech.2009.04.012Suche in Google Scholar
[34] T.Tanaka, M.Kozako, N.Fuse, Y.Ohki: IEEE Trans. Dielect. Elect. Insulat. 12 (2005) 669. 10.1109/TDEI.2005.1511092Suche in Google Scholar
[35] H.C.Pant, M.K.Patra, A.Verma, S.R.Vadera, N.Kumar: Acta Mater. 54 (2006) 3163. 10.1016/j.actamat.2006.02.031Suche in Google Scholar
[36] S.M.Abbas, M.Chandra, A.Verma, R.Chatterjee, T.C.Goel: Composites: Part A37 (2006) 2148. 10.1016/j.compositesa.2005.11.006Suche in Google Scholar
[37] B.K.Sharma, N.Khare, S.K.Dhawan, H.C.Gupta: J. Alloys Compd. 477 (2009) 370. 10.1016/j.jallcom.2008.10.004Suche in Google Scholar
[38] K.Lakshmi, H.John, K.T.Mathew, R.Joseph, K.E.George: Acta Mater. 57 (2009) 371. 10.1016/j.actamat.2008.09.018Suche in Google Scholar
[39] S.M.Abbas, A.K.Dixit, R.Chatterjee, T.C.Goel: J. Nanosci. Nanotechnol. 7 (2007) 2129. PMid: 17655005; 10.1166/jnn.2007.782Suche in Google Scholar PubMed
[40] R.S.Biscaro, M.C.Rezende, R.Faez: Polym. Adv. Technol. 20 (2009) 28. 10.1002/pat.1239Suche in Google Scholar
[41] N.H.Hoang, J.-L.Wojkiewicz, J.-L.Miane, R.S.Biscarro: Polym. Adv. Technol. 18 (2007) 257. 10.1002/pat.829Suche in Google Scholar
[42] N.N.Hoang, J.-L.Miane, J.-L.Wojkiewicz, in: HUT-ICCE 2006 First International Conference on Communications and Electronics, Proceedings PART1 (2006) 482.Suche in Google Scholar
[43] J.L.Wojkiewicz, S.Fauveaux, N.Redon, J.L.Miane: Int. J. Appl. Electrom. 19 (2004) 203.Suche in Google Scholar
[44] H.Hovhannisyan, H.Matnishyan, A.Vardanyan, A.Hakhumyan, L.Abrahamyan, in: Conference Proceedings-European Microwave Conference (2004) 793.Suche in Google Scholar
[45] S.M.Abbas, A.K.Dixit, R.Chatterjee, T.C.Goel: Mater. Sci. Eng. B123 (2005) 167. 10.1016/j.mseb.2005.07.018Suche in Google Scholar
[46] S.M.Abbas, R.Chatterjee, A.K.Dixit, A.V.R.Kumar, T.C.Goel: J. Appl. Phys. 101 (2007) 074105. 10.1063/1.2716379Suche in Google Scholar
[47] N. ElKamchi, B.Belaabed, J.-L.Wojkiewicz, S.Lamouri, T.Lasri: J. Appl. Polym. Sci. 127 (2013) 4426. 10.1002/app.38036Suche in Google Scholar
[48] B.Belaabed, J.L.Wojkiewicz, S.Lamouri, N.El Kamchi, T.Lasri: J. Alloys Compd. 527 (2012) 137. 10.1016/j.jallcom.2012.02.179Suche in Google Scholar
[49] V.-T.Truong, A.R.Codd, M.Forsyth: J. Mater. Sci. 29 (1994) 4331. 10.1007/BF00414219Suche in Google Scholar
[50] R.Faez, A.D.Reis, M.A.Soto-Oviedo, M.C.Rezende, M.-A.De Paoli: Polym. Bull. 55 (2005) 299. 10.1007/s00289-005-0433-ySuche in Google Scholar
[51] H.John, R.M.Thomas, J.Jacob, K.T.Mathew, R.Joseph: Polym. Compos. 28 (2007) 588. 10.1002/pc.20268Suche in Google Scholar
[52] H.John, S.Bijukumar, K.T.Mathew, R.Joseph: Plast. Rubber Compos. 32 (2003) 306. 10.1179/146580103225003460Suche in Google Scholar
[53] C.Conn, D.Gneub, N.Booth, A.S.Mohan, J.Unsworth, in: Proc. SPIE Int. Soc. Opt. Eng., (1997)Suche in Google Scholar
[54] A.Barnes, A.Despotakis, P.V.Wright, T.C.P.Wong, B.Chambers, A.P.Anderson: Electrochim. Acta43 (1998) 1629. 10.1016/S0013-4686(97)10064-0Suche in Google Scholar
[55] T.C.P.Wong, A.Barnes, B.Chambers, A.P.Anderson, P.V.Wright, in: IEE Conference Publication (1997)Suche in Google Scholar
[56] A.Barnes, A.Despotakis, T.C.P.Wong, A.P.Anderson, B.Chambers, P.V.Wright: Smart Mater. Struct. 7 (1998) 752. 10.1088/0964-1726/7/6/003Suche in Google Scholar
[57] A.Barnes, P.V.Wright, A.Despotakis, K.Lees, B.Chambers, in: Proc. SPIE Int. Soc. Opt. Eng., San Diego, CA, (1998)Suche in Google Scholar
[58] A.Barnes, K.L.Ford, P.V.Wright, B.Chambers, C.D.Smith, D.A.Thompson, F.Pavri, in: Proc. SPIE Int. Soc. Opt. Eng., (2000)Suche in Google Scholar
© 2014, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Microwave absorbing materials based on polyaniline composites: a review
- Atomic mobilities in fcc Cu–Mn–Ni–Zn alloys and their characterizations of uphill diffusion and zero-flux plane phenomena
- Synthesis and characterization of nanocristalline Fe-40 at.% Si alloy prepared by high energy ball milling
- An investigation of the microstructure and hydrogenation/dehydrogenation properties of ball-milled CeMg12 alloys with Ni powders
- Nanoscratch characterization of indium nitride films
- Role of axial thrust in the formation of microstructure and fracture surface of the weld zone in friction stir welded AA6063 aluminium alloy
- Microstructures and corrosion resistance of three typical superlight Mg–Li alloys
- The effect of magnetron-deposited Al2O3 coating on the corrosion resistance of Ti–Al alloys in a 9 %O2 + 0.2 %HCl + 0.08 %SO2 + N2 atmosphere
- Homogenization of direct chill cast AlSi1MgMn billets
- Effect of rare earth Y addition on two-phase Ni53Mn22Co6Ga19 high-temperature shape memory alloy
- Thermal treatment induced transition from Zn3(OH)2(BDC)2 (MOF-69c) to Zn4O(BDC)3 (MOF-5)
- Thermal investigation of alumina-based pastes and refractory mixturesd
- Short Communications
- One-step magnetic modification of non-magnetic solid materials
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Microwave absorbing materials based on polyaniline composites: a review
- Atomic mobilities in fcc Cu–Mn–Ni–Zn alloys and their characterizations of uphill diffusion and zero-flux plane phenomena
- Synthesis and characterization of nanocristalline Fe-40 at.% Si alloy prepared by high energy ball milling
- An investigation of the microstructure and hydrogenation/dehydrogenation properties of ball-milled CeMg12 alloys with Ni powders
- Nanoscratch characterization of indium nitride films
- Role of axial thrust in the formation of microstructure and fracture surface of the weld zone in friction stir welded AA6063 aluminium alloy
- Microstructures and corrosion resistance of three typical superlight Mg–Li alloys
- The effect of magnetron-deposited Al2O3 coating on the corrosion resistance of Ti–Al alloys in a 9 %O2 + 0.2 %HCl + 0.08 %SO2 + N2 atmosphere
- Homogenization of direct chill cast AlSi1MgMn billets
- Effect of rare earth Y addition on two-phase Ni53Mn22Co6Ga19 high-temperature shape memory alloy
- Thermal treatment induced transition from Zn3(OH)2(BDC)2 (MOF-69c) to Zn4O(BDC)3 (MOF-5)
- Thermal investigation of alumina-based pastes and refractory mixturesd
- Short Communications
- One-step magnetic modification of non-magnetic solid materials
- DGM News
- DGM News