Startseite Formation of Al67Cu23Fe10 quasicrystals by microwave heating
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Formation of Al67Cu23Fe10 quasicrystals by microwave heating

  • Carmen Mihoc , Daniel Schick , Matthias Lütgens , Christian Lathe und Eberhard Burkel
Veröffentlicht/Copyright: 15. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 11

Abstract

The present work was carried out to compare the formation of single icosahedral phase during conventional heating and microwave processing. Al67Cu23Fe10 alloy powder was synthesized from high purity (99.9%) powder elements by mechanical alloying. Differential scanning calorimetry combined with in-situ synchrotron energy dispersive X-ray diffraction was used to identify the main solid state reactions and the phase evolution of the powders. Inductive microwave processing in the magnetic field anti-node was performed to obtain the quasicrystalline phase in only a few seconds. Due to the rapid cooling of the sample it was possible to stabilize the icosahedral phase against its competing quasicrystalline approximants. Laboratory X-ray diffraction analysis was used to characterise the atomic structure of the specimen and scanning electron microscopy was used to characterise the microstructure after the microwave processing.

Keywords: Quasicrystals; Microwave processing; Mechanical alloying
∗ Correspondence address Carmen Mihoc, University of Rostock, August-Bebel-Str. 55, 18055 Rostock, Germany, Tel.: +493814986867, Fax: +493814986862, E-mail:

References

[1] D.Shechtman, I.Blech, D.Gratias, J.W.Cahn: Phys. Rev. Lett.,53 (1984) 1951–1953. 10.1103/PhysRevLett.53.195110.1103/PhysRevLett.53.1951Suche in Google Scholar

[2] H.-R.Trebin, (Ed.): Quasicrystals, Wiley-VCH, (2003).10.1002/3527606572Suche in Google Scholar

[3] D.J.Sordelet, J.M.Dubois: Quasicrystals, MRS – Mat. Res. Soc. (1997).Suche in Google Scholar

[4] E.Huttunen-Saarivirta: J. Alloys Compd.363, (2004), 154–178.10.1016/S0925-8388(03)00445-610.1016/S0925-8388(03)00445-6Suche in Google Scholar

[5] R.Nicula, F.Turquier, M.Stir, V.Y.Kodash, J.R.Groza, E.Burkel: J. Alloys Compd.434–435 (2007) 319–323.10.1016/j.jallcom.2006.08.195Suche in Google Scholar

[6] K. F.Kelton, Int. Mater. Rev.38 (1993) 105–137.10.1179/09506609379032629410.1179/095066093790326294Suche in Google Scholar

[7] J.-K.Jeon, S.-H.Lee, J.-G.Kim, J.-Y.Kim: J. Korean Phys. Soc.53 (2008) 2587–2590. 10.3938/jkps.53.328710.3938/jkps.53.3287Suche in Google Scholar

[8] A.I.Zaitsev, N.E.Zaitseva, R.Y.Shimko, N.A.Arutyunyan, S.F.Dunaev, V.S.Kraposhin, H.T.Lam: J. Phys.: Condens. Matter20 (2008) 114121/1–114121/4.10.1088/0953-8984/20/11/114121Suche in Google Scholar PubMed

[9] V.Tcherdyntsev, S.D.Kaloshkin, E.V.Shelekhov, E.A.Afonina, A.M.Blinov, Y.V.Baldokhin: J. Metastab. Nanocryst.20–21 (2004) 157.10.4028/www.scientific.net/JMNM.20-21.157Suche in Google Scholar

[10] X.Liu, Y.Osawa, S.Takamori, G.Yang: Mater. Lett.61 (2007) 5164. 10.1016/j.matlet.2007.04.02110.1016/j.matlet.2007.04.021Suche in Google Scholar

[11] R.Roy, D.Agrawal, J.Cheng, S.Gedevanishvili: Nature399 (1999) 668–670. 10.1038/2139010.1038/21390Suche in Google Scholar

[12] Y.V.Bykov, K.I.Rybakov, V.E.Semenov: J. Phys. D: Appl. Phys34 (2001) R55–R75. 10.1088/0022-3727/34/13/20110.1088/0022-3727/34/13/201Suche in Google Scholar

[13] E.T.Thostenson, T.W.Chou: Compos. Part A-Appl. Sci. Manuf.30 (1999), 1055–1071. 10.1016/S1359-835X(99)00020-210.1016/S1359-835X(99)00020-2Suche in Google Scholar

[14] K.I.Rybakov, V.E.Semenov, S.V.Egorov, A.G.Eremeev, I.V.Plotnikov, Y.V.Bykov: J. Appl. Phys.99 (2006) 023506. 10.1063/1.215907810.1063/1.2159078Suche in Google Scholar

[15] J.Ma, J.F.Diehl, E.J.Johnson, K.R.Martin, N.M.Miskovsky, C.T.Smith, G.J.Weisel, B.L.Weiss, D.T.Zimmermann: J. Appl. Phys.101 (2007) 074906. 10.1063/1.271308710.1063/1.2713087Suche in Google Scholar

[16] M.Stir, R.Nicula, E.Burkel: J. Eur. Ceram. Soc.,26 (2006) 1547–1553. 10.1016/j.jeurceramsoc.2005.03.26010.1016/j.jeurceramsoc.2005.03.260Suche in Google Scholar

[17] D.L.Decker: J. Appl. Phys.,42 (1971) 3239–3244.10.1063/1.166071410.1063/1.1660714Suche in Google Scholar

[18] V.Tcherdyntsev, S.Kaloshkin, A.Salimon, E.Leonova, I.Tomilin, J.Eckert, F.Schurack, V.Rogozin, S.Pisarev, Y.Trykov, Mater. Manufact. Proc.17 (2002) 825–841.10.1081/AMP-12001606010.1081/AMP-120016060Suche in Google Scholar

[19] C.Ricard, L.Dubois, S.Vaucher, S.Leparoux, J.Camart, J.Pribetich: Microwave Opt. Techn. Let.48 (2006) 2037–2041.10.1002/mop.2185610.1002/mop.21856Suche in Google Scholar

[20] A.Nesbitt, P.Navabpour, B.Degamber, C.Nightingale, T.Mann, G.Fernando, R.J.Day: Meas. Sci. Technol., 15, 11 (2004), 2313–2324. 10.1088/0957-0233/15/11/01810.1088/0957-0233/15/11/018Suche in Google Scholar

[21] S.Vaucher, R.Nicula, J.M.Catala-Civera, B.Schmitt, B.Patterson: J. Mat. Res.23 (2008) 170–175.10.1557/JMR.2008.000910.1557/JMR.2008.0009Suche in Google Scholar

[22] Y.V.Milman: Mater. Sci. Forum482 (2005) 77–82.10.4028/www.scientific.net/MSF.482.77Suche in Google Scholar

Received: 2010-6-16
Accepted: 2012-3-26
Published Online: 2013-05-15
Published in Print: 2012-11-01

© 2012, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Award/Preisverleihung
  4. The Werner-Köster-Preis 2011
  5. Original Contributions
  6. Ostwald ripening in Al–Li alloys: A test of theory
  7. The Mg–C phase equilibria and their thermodynamic basis
  8. Experimental and thermodynamic study of nickel (30 wt.%Cr) – based alloys containing between 2.5 and 5.0 wt.% carbon
  9. Thermodynamic description of the system Cu–Sn–P experimental and numerical investigation
  10. Severe tempering of bainite generated at low transformation temperatures
  11. A comparative study of microstructure, compressive, and fracture properties of Ti3Al-based intermetallics produced via powder metallurgy, and melting and casting processes
  12. Rod-like structure and microhardness during directional solidification of Sn-1wt.%Cu eutectic alloy
  13. Properties of Si3N4/SiC composites produced via spark plasma sintering
  14. Formation of Al67Cu23Fe10 quasicrystals by microwave heating
  15. Magnetoelectric characteristics of cobalt-iron alloy–lead zirconate titanate bilayer planar structures
  16. On the texture and grain growth in hot-deformed and annealed WE54 alloy
  17. Numerical study of equal-channel angular pressing based on the element-free Galerkin method
  18. Dynamic behavior of staggered triangular honeycomb cores under in-plane crushing loadings
  19. Preparation and characterization of polyaniline/Fe3O4–polyacrylonitrile composite nanofibers
  20. Controlled release of ofloxacin from gelatin blended with cloisite 30B
  21. Short Communications
  22. Effect of sol concentration on the microstructures of barium hafnate titanate nanopowders
  23. People
  24. Horst Vehoff 65 years
  25. DGM News
  26. DGM News
https://doi.org/10.3139/146.110786
Schlagwörter für diesen Artikel
Quasicrystals; Microwave processing; Mechanical alloying

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Award/Preisverleihung
  4. The Werner-Köster-Preis 2011
  5. Original Contributions
  6. Ostwald ripening in Al–Li alloys: A test of theory
  7. The Mg–C phase equilibria and their thermodynamic basis
  8. Experimental and thermodynamic study of nickel (30 wt.%Cr) – based alloys containing between 2.5 and 5.0 wt.% carbon
  9. Thermodynamic description of the system Cu–Sn–P experimental and numerical investigation
  10. Severe tempering of bainite generated at low transformation temperatures
  11. A comparative study of microstructure, compressive, and fracture properties of Ti3Al-based intermetallics produced via powder metallurgy, and melting and casting processes
  12. Rod-like structure and microhardness during directional solidification of Sn-1wt.%Cu eutectic alloy
  13. Properties of Si3N4/SiC composites produced via spark plasma sintering
  14. Formation of Al67Cu23Fe10 quasicrystals by microwave heating
  15. Magnetoelectric characteristics of cobalt-iron alloy–lead zirconate titanate bilayer planar structures
  16. On the texture and grain growth in hot-deformed and annealed WE54 alloy
  17. Numerical study of equal-channel angular pressing based on the element-free Galerkin method
  18. Dynamic behavior of staggered triangular honeycomb cores under in-plane crushing loadings
  19. Preparation and characterization of polyaniline/Fe3O4–polyacrylonitrile composite nanofibers
  20. Controlled release of ofloxacin from gelatin blended with cloisite 30B
  21. Short Communications
  22. Effect of sol concentration on the microstructures of barium hafnate titanate nanopowders
  23. People
  24. Horst Vehoff 65 years
  25. DGM News
  26. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110786/pdf?lang=de
Button zum nach oben scrollen