Startseite Technik The effect of heat treatments on the microstructure, texture and mechanical properties of the extruded magnesium alloy ME21
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The effect of heat treatments on the microstructure, texture and mechanical properties of the extruded magnesium alloy ME21

Dedicated to Prof. Dr.-Ing. Heinrich Wollenberger on the occasion of his 80th birthday
  • Katrin Brömmelhoff , Michael Huppmann und Walter Reimers
Veröffentlicht/Copyright: 18. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 102 Heft 9

Abstract

Heat treatments of the hot extruded magnesium alloy ME21 were performed at 400 °C – 550 °C and various annealing times. The evolution of the microstructure, the texture and the resulting mechanical properties were investigated. The heat treatments result in grain growth and in an intensification of the so-called rare earth texture. The grain coarsening results in a decrease in the yield strength according to the Hall – Petch relationship. The rare earth texture also contributes to a decrease in the yield strength due to the easy activation of basal slip systems. However, this texture improves the ductility at room temperature. The combination of large grain sizes, dissolved Mg12Ce precipitates and the rare earth texture delivers fracture strains up to  – 55 % under compression. The elongation under tension is less affected.

Keywords: Magnesium alloy; Extrusion; Heat treatment; Texture; Mechanical properties
∗ Correspondence address, Prof. Dr. Walter Reimers, TU Berlin, Metallische Werkstoffe, Sekr. BH 18, Ernst-Reuter-Platz 1, D-10587 Berlin, Germany, Tel.: +49 30 3142 2417, Fax: +49 30 3142 2996, E-mail:

References

[1] K.U.Kainer (Ed.): Magnesium, WILEY-VCH, Weinheim (2010).Suche in Google Scholar

[2] T. Mukai, M.Yamanoi, H.Watanabe, K.Higashi: Scripta Mater.45 (2001) 89.10.1016/S1359-6462(01)00996-4Suche in Google Scholar

[3] N.Stanford, D.Atwell, A.Beer, C.Davies, M.R.Barnett: Scripta Mater.59 (2008) 772.10.1016/j.scriptamat.2008.06.008Suche in Google Scholar

[4] N.Stanford, M.R.Barnett: Mater. Sci. Eng. A496 (2008) 399.10.1016/j.msea.2008.05.045Suche in Google Scholar

[5] N.Stanford: Mater. Sci. Eng. A527 (2010) 2669.10.1016/j.msea.2009.12.036Suche in Google Scholar

[6] R.K.Mishra, A.K.Gupta, P.R.Rao, A.K.Sachdev, A.M.Kumar, A.A.Luo: Scripta Mater.59 (2008) 562.10.1016/j.scriptamat.2008.05.019Suche in Google Scholar

[7] J.Bohlen, J.Swiostek, D.Letzig, K.U.Kainer, in: E.A.Nyberg, S.R.Agnew, N.R.Neelameggham, M.O.Pekguleryuz (Eds.): Magnesium Technology 2009, TMS (2009) 225.Suche in Google Scholar

[8] Y.Chino, M.Kado, M.Mabuchi: Mater. Sci. Eng. A494 (2008) 343.10.1016/j.msea.2008.04.059Suche in Google Scholar

[9] Y.Chino, M.Kado, M.Mabuchi: Acta Mater.56 (2008) 387.10.1016/j.actamat.2007.09.036Suche in Google Scholar

[10] Y.Chino, K.Sassa, M.Mabuchi: Mater. Sci. Eng. A513–514 (2009) 394.10.1016/j.msea.2009.01.074Suche in Google Scholar

[11] C.E.Dreyer, W.V.Chiu, R.H.Wagoner, S.R.Agnew: J. Mater. Process. Tech.210 (2010) 37.10.1016/j.jmatprotec.2009.08.022Suche in Google Scholar

[12] M. Huppmann, S.Gall, S.Müller, W.Reimers: Mater.Sci. Eng. A528 (2010) 342.10.1016/j.msea.2010.09.025Suche in Google Scholar

[13] T. Al-Samman: Acta Mater.57 (2009) 2229.10.1016/j.actamat.2009.01.031Suche in Google Scholar

[14] M.H.Yoo: Metall. Trans. A12 (1981) 409.10.1007/BF02648537Suche in Google Scholar

[15] S.R.Agnew, Ö.Duygulu: Int. J. Plast.21 (2005) 1161.10.1016/j.ijplas.2004.05.018Suche in Google Scholar

[16] J.Bohlen, S.B.Yi, J.Swiostek, D.Letzig, H.G.Brokmeier, K.U.Kainer: Scripta Mater.53 (2005) 259.10.1016/j.scriptamat.2005.03.036Suche in Google Scholar

[17] M.Huppmann, W.Reimers: Int. J. Mat. Res.101 (2010) 1264.10.3139/146.110410Suche in Google Scholar

[18] R. Matsumoto: Trans. Nonferrous Met. Soc. China20 (2010) 1275.10.1016/S1003-6326(09)60290-9Suche in Google Scholar

[19] P.Mehrotra, T.M.Lillo, S.R.Agnew: Scripta Mater.55 (2006) 855.10.1016/j.scriptamat.2006.08.005Suche in Google Scholar

[20] L.L.Rokhlin, N.I.Nikitina: J. Alloys Comp.279 (1998) 166.10.1016/S0925-8388(98)00655-0Suche in Google Scholar

[21] P.Rodrigo, C.J.Münez, M.D.Làpez, J.Rams, E.Otero, M.D.Escalera, in: K.U. Kainer (Ed.), Magnesium: 8th international conference on magnesium alloys & their applications, WILEY-VCH, Weinheim (2010) 577.Suche in Google Scholar

[22] H.J.Bunge: Program System ODF-Analysis, Cuvillier Verlag, Göttingen (1993).Suche in Google Scholar

[23] J.A.del Valle, F.Carreno, O.A.Ruano: Acta Mater.54 (2006) 4247.10.1016/j.actamat.2006.05.018Suche in Google Scholar

[24] M.A. Azeem, A.Tewari, U.Ramamurty: Mater. Sci. Eng. A527 (2010) 898.10.1016/j.msea.2009.09.008Suche in Google Scholar

[25] L.Jiang, J.J.Jonas, R.K.Mishra, A.A.Luo, A.K.Sachdev, S.Godet: Acta Mater.55 (2007) 3899.10.1016/j.actamat.2007.03.006Suche in Google Scholar

[26] S.Yi, H.G.Brokmeier, D.Letzig: J. Alloys Comp.506 (2010) 364.10.1016/j.jallcom.2010.07.008Suche in Google Scholar

[27] M.T. Pérez-Prado, O.A. Ruano: Scripta Mater.46 (2002) 149.10.1016/S1359-6462(01)01212-XSuche in Google Scholar

[28] K. Hantzsche, J.Bohlen, J.Wendt, K.U.Kainer, S.B.Yi, D.Letzig: Scripta Mater.63 (2010) 725.10.1016/j.scriptamat.2009.12.033Suche in Google Scholar

[29] X.Zhang, D.Kevorkov, I.H.Jung, M.Pekguleryuz: J. Alloys Comp.482 (2009) 420.10.1016/j.jallcom.2009.04.042Suche in Google Scholar

[30] H.Okamoto: J. Phase. Equilib. Diff.29 (2008) 208.10.1007/s11669-008-9272-5Suche in Google Scholar

[31] F.J.Humphreys, M.Hatherly: Recrystallization and related annealing phenomena, Elsevier Science, Oxford (1995).Suche in Google Scholar

[32] M.R. Barnett, Z.Keshavarz, A.G.Beer, D.Atwell: Acta Mater.52 (2004) 5093.10.1016/j.actamat.2004.07.015Suche in Google Scholar

Received: 2010-12-14
Accepted: 2011-7-6
Published Online: 2013-05-18
Published in Print: 2011-09-01

© 2011, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr.-Ing. Heinrich Wollenberger — 80 years
  5. Original Contributions
  6. Atom probe tomography: from physical metallurgy towards microelectronics
  7. Accumulation of radiation damage and disordering in MgAl2O4 under swift heavy ion irradiation
  8. TEM study of irradiation induced copper precipitation in boron alloyed EUROFER97 steel
  9. Order – disorder transformation in Ni – V alloys under electron irradiation
  10. Materials issues of the SINQ high-power spallation target
  11. The origin and development of the P{011}<111> orientation during recrystallization of particle-containing alloys
  12. Coarsening kinetics of Cu-rich precipitates in a concentrated multicomponent Fe–Cu based steel
  13. Beyond Ni-based superalloys: Development of CoRe-based alloys for gas turbine applications at very high temperatures
  14. The effect of heat treatments on the microstructure, texture and mechanical properties of the extruded magnesium alloy ME21
  15. Analysing SANS data to determine magnetisation reversal processes in composite perpendicular magnetic recording media using TEM images
  16. Dislocationless sliding in a polycluster glass
  17. Evolution of transformation plasticity during bainitic transformation
  18. Surface tension and viscosity of NiAl catalytic precursor alloys from microgravity experiments
  19. Synthesis of carbon nanotubes by fine Ni particles in Ni3Al foam
  20. Fabrication of dielectric thin films by sputtering deposition at different pressures with (Ba0.3Sr0.7)(Zn1/3Nb2/3)O3 ceramic as target
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110560
Schlagwörter für diesen Artikel
Magnesium alloy; Extrusion; Heat treatment; Texture; Mechanical properties

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr.-Ing. Heinrich Wollenberger — 80 years
  5. Original Contributions
  6. Atom probe tomography: from physical metallurgy towards microelectronics
  7. Accumulation of radiation damage and disordering in MgAl2O4 under swift heavy ion irradiation
  8. TEM study of irradiation induced copper precipitation in boron alloyed EUROFER97 steel
  9. Order – disorder transformation in Ni – V alloys under electron irradiation
  10. Materials issues of the SINQ high-power spallation target
  11. The origin and development of the P{011}<111> orientation during recrystallization of particle-containing alloys
  12. Coarsening kinetics of Cu-rich precipitates in a concentrated multicomponent Fe–Cu based steel
  13. Beyond Ni-based superalloys: Development of CoRe-based alloys for gas turbine applications at very high temperatures
  14. The effect of heat treatments on the microstructure, texture and mechanical properties of the extruded magnesium alloy ME21
  15. Analysing SANS data to determine magnetisation reversal processes in composite perpendicular magnetic recording media using TEM images
  16. Dislocationless sliding in a polycluster glass
  17. Evolution of transformation plasticity during bainitic transformation
  18. Surface tension and viscosity of NiAl catalytic precursor alloys from microgravity experiments
  19. Synthesis of carbon nanotubes by fine Ni particles in Ni3Al foam
  20. Fabrication of dielectric thin films by sputtering deposition at different pressures with (Ba0.3Sr0.7)(Zn1/3Nb2/3)O3 ceramic as target
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 17.1.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.110560/html?lang=de
Button zum nach oben scrollen