Startseite Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C

  • Meirong Ai , Fucheng Yin , Ya Liu , Xinming Wang , Manxiu Zhao und Xuping Su
Veröffentlicht/Copyright: 1. März 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 99 Heft 2

Abstract

The isothermal section of the Fe–Zn–Cr ternary system at 600 °C was determined using equilibrated alloys with the aid of a diffusion couple approach. The specimens were investigated by means of scanning electron microscopy equipped with energy dispersive X-ray spectroscopy, electron probe microanalysis and X-ray diffraction. The results showed that (Cr) is in equilibrium with all phases in the system except (α-Fe). A ternary phase with an approximate formula of Fe18Zn79Cr3 was found. The composition ranges of all intermetallic phases in the system were determined. The solubility of Zn in (Cr) is about 2.5 at.%, and that of Cr in the δ, Γ and liquid zinc is 3.1, 5.4 and 1.4 at.%, respectively.

Keywords:: Fe–Zn–Cr system; Phase diagram; Diffusion couple; X-ray diffraction; Scanning electron microscopy
3 Correspondence address: Professor Dr. Xuping Su, School of Mechanical Engineering, Xiangtan University, Hunan 411105, P.R. China, Tel.: +86 732 829 2060, Fax: +86 732 829 2210. E-mail:

References

[1] H.Guttman, P.Niessen: Can. Metall. Quart.11(1972)609.10.1179/000844372795102756Suche in Google Scholar

[2] J.Foct, P.Perrot, G.Reumont: Scripta Metall. Mater.28(1993)1195.10.1016/0956-716X(93)90453-YSuche in Google Scholar

[3] S.Harper, R.S.Browne: 11th International Galvanizing Conference, Madrid, Spain. (1976)11–17.Suche in Google Scholar

[4] A.R.B.Verma, W.J.van Ooij: Surf. Coat. Technol.89(1997)132.10.1016/S0257-8972(96)02941-6Suche in Google Scholar

[5] N.-Y.Tang, X.B.Yu: J. Phase Equilib. and Diff.26(2005)50.10.1007/s11669-005-0057-9Suche in Google Scholar

[6] B.Gay, S.Claessens: International Application Published Under the Patent Cooperation Treaty, International Publication Number WO 2004/020684 A1.Suche in Google Scholar

[7] G.Reumont, S.Maniez, B.Gay, P.Perrot: J. Mater. Sci. Lett.19(2000)2081.10.1023/A:1026789702479Suche in Google Scholar

[8] G.Reumont, M.Mathon, R.Fourmentin, P.Perrot: Z. Metallkd.94(2003)411.10.3139/146.030411Suche in Google Scholar

[9] P.J.Brown: Acta Crystallographica15(1962)608.10.1107/S0365110X62001528Suche in Google Scholar

[10] G.Kirchner, H.Harvig, K.R.Moquist, M.Hillert: Arch. Eisenhüttenwes.44(1973)227.10.1002/srin.197304522Suche in Google Scholar

[11] G.F.Bastin, F.J.J.van Loo, G.D.Riek: Z. Metallkd.68(1977)359.10.1515/ijmr-1977-680508Suche in Google Scholar

[12] P.J.Gellings, E.W.de Bree, G.Gierman: Z. Metallkd.70(1979)312.10.1515/ijmr-1979-700506Suche in Google Scholar

[13] P.J.Gellings, G.Gierman, D.Koster, J.Kuit: Z. Metallkd.71(1980)70.10.1515/ijmr-1980-710202Suche in Google Scholar

[14] G.Reumont, P.Perrot, J.M.Fiorani, J.Hertz: J. Phase Equilib.21(2000)371.10.1361/105497100770339905Suche in Google Scholar

[15] X.Su, N.-Y.Tang, J.M.Toguri: J. Alloys Compd.325(2001)129.10.1016/S0925-8388(01)01273-7Suche in Google Scholar

[16] J.Nakano, D.V.Malakhov and G.R.Purdy: Calphad29(2005)276.10.1016/j.calphad.2005.08.005Suche in Google Scholar

[17] S.M.Dubiel, G.Inden: Z. Metallkd.78(1987)544.10.1515/ijmr-1987-780802Suche in Google Scholar

[18] J.-C.Lin, Y.-Y.Chuang, K.-C.Hsieh, Y.-A.Chang: Calphad11(1987)57.10.1016/0364-5916(87)90020-4Suche in Google Scholar

[19] T.B.Massalski: Binary Alloy Phase Diagram2(1990)1358.Suche in Google Scholar

[20] N.-Y.Tang, X.Su, J.M.Toguri: Calphad25(2001)267.10.1016/S0364-5916(01)00048-7Suche in Google Scholar

[21] X.Su, N.-Y.Tang, J.M.Toguiri: Can. Metall. Quart.40(2001)377.10.1179/000844301794388353Suche in Google Scholar

[22] G.-Y.Gan, J.-L.Sun, J.-C.Chen, Y.-C.Chen, J.-K.Yan: The Chinese Journal of Nonferrous Metals11S1(2001)167.Suche in Google Scholar

Received: 2007-04-29
Accepted: 2007-11-22
Published Online: 2013-03-01
Published in Print: 2008-02-01

© 2008, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR wishes all its readers and contributors a belated Happy New Year
  5. Basic
  6. Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
  7. Thermodynamic description of the ternary Pd–Sn–Zn system
  8. The morphology of nitrided iron–chromium alloys; influence of chromium content and nitrogen supersaturation
  9. The surface tension and density of Ag–Bi–Sn alloys
  10. Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys
  11. Hardening precipitation and mechanical properties in new Mg–Mn–Y–Gd alloys
  12. On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
  13. A numerical study of grain size effects on the strength and elongation of Al polycrystals using strain gradient plasticity theory
  14. Applied
  15. Thermodynamic simulation of the Bayer process
  16. The anisotropy of deformation for friction stir processed Mg alloy due to the existence of onion rings
  17. A study of the Si-phase growth mechanismin thixocast (A356) alloy during hot deformation
  18. Study of hydrogen absorption of aluminum melt
  19. Modelling of work-hardening behaviour for laser welded magnesium alloy
  20. Tribological behavior of short carbon fiber or hybrid with SiCp reinforced Al alloy composites
  21. Elevated temperature compressive behavior of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloy with minor Ho addition
  22. Notifications
  23. News
https://doi.org/10.3139/146.101626
Schlagwörter für diesen Artikel
Fe–Zn–Cr system; Phase diagram; Diffusion couple; X-ray diffraction; Scanning electron microscopy

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR wishes all its readers and contributors a belated Happy New Year
  5. Basic
  6. Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
  7. Thermodynamic description of the ternary Pd–Sn–Zn system
  8. The morphology of nitrided iron–chromium alloys; influence of chromium content and nitrogen supersaturation
  9. The surface tension and density of Ag–Bi–Sn alloys
  10. Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys
  11. Hardening precipitation and mechanical properties in new Mg–Mn–Y–Gd alloys
  12. On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
  13. A numerical study of grain size effects on the strength and elongation of Al polycrystals using strain gradient plasticity theory
  14. Applied
  15. Thermodynamic simulation of the Bayer process
  16. The anisotropy of deformation for friction stir processed Mg alloy due to the existence of onion rings
  17. A study of the Si-phase growth mechanismin thixocast (A356) alloy during hot deformation
  18. Study of hydrogen absorption of aluminum melt
  19. Modelling of work-hardening behaviour for laser welded magnesium alloy
  20. Tribological behavior of short carbon fiber or hybrid with SiCp reinforced Al alloy composites
  21. Elevated temperature compressive behavior of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloy with minor Ho addition
  22. Notifications
  23. News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 10.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.101626/html?lang=de
Button zum nach oben scrollen