Startseite Technik The surface tension and density of Ag–Bi–Sn alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The surface tension and density of Ag–Bi–Sn alloys

  • Przemysław Fima und Marian Kucharski
Veröffentlicht/Copyright: 1. März 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 99 Heft 2

Abstract

The sessile drop method has been used to measure the density and surface tension of liquid Ag–Bi–Sn mixtures. The density of these alloys shows linear dependence on temperature for all the compositions investigated. However, the surface tension shows curvilinear dependence on temperature for all of the compositions, except for those of a low silver content. The experimental values of the surface tension of Ag–Bi–Sn alloys are compared with those computed from the model, and relatively good agreement is observed.

Keywords:: Ag–Bi–Sn system; Density; Surface tension; Lead-free solders
1 Correspondence address: Dr. Przemysław Fima, Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 30-059 Kraków, ul. Reymonta 25, Poland, Tel.: +48 12 637 4200, Fax: +48 12 637 2192. E-mail:

References

[1] M.Kucharski, P.Fima: Monatsh. Chem. Chem. Mon.136(2005)1841.10.1007/s00706-005-0393-9Suche in Google Scholar

[2] Z.Moser, W.Gasior, J.Pstrus: J. Electron. Mater.30(2001)1104.10.1007/s11664-001-0136-6Suche in Google Scholar

[3] M.Kucharski, M.Gluzinska: Arch. Metall. Mater.46(2001)155.Suche in Google Scholar

[4] M.Kucharski, P.Fima, P.Skrzyniarz, W.Przebinda-Stefanowa: Arch. Metall. Mater.51(2006)389.Suche in Google Scholar

[5] P.Fima, K.Wiater, M.Kucharski: Surf. Sci.601(2007)3481.10.1016/j.susc.2007.06.032Suche in Google Scholar

[6] Y.Rotenberg, L.Boruvka, A.W.Neumann: J. Colloid Interface Sci.93(1983)169.10.1016/0021-9797(83)90396-XSuche in Google Scholar

[7] J.A.V.Butler: Proc. Roy. Soc. A135(1935)348.10.5694/j.1326-5377.1935.tb43141.xSuche in Google Scholar

[8] M.Kucharski, C.Acuna: Arch. Metall. Mater.41(1996)271.Suche in Google Scholar

[9] A.T.Dinsdale, A.Watson, A.Kroupa, A.Zemanova, J.Vrestal, J.Visdal: COST 531 v2.0 Thermodynamic Database(2006) (http://www.slihot.co.uk/COST531/td_database.htm).Suche in Google Scholar

Received: 2007-03-04
Accepted: 2007-10-19
Published Online: 2013-03-01
Published in Print: 2008-02-01

© 2008, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR wishes all its readers and contributors a belated Happy New Year
  5. Basic
  6. Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
  7. Thermodynamic description of the ternary Pd–Sn–Zn system
  8. The morphology of nitrided iron–chromium alloys; influence of chromium content and nitrogen supersaturation
  9. The surface tension and density of Ag–Bi–Sn alloys
  10. Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys
  11. Hardening precipitation and mechanical properties in new Mg–Mn–Y–Gd alloys
  12. On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
  13. A numerical study of grain size effects on the strength and elongation of Al polycrystals using strain gradient plasticity theory
  14. Applied
  15. Thermodynamic simulation of the Bayer process
  16. The anisotropy of deformation for friction stir processed Mg alloy due to the existence of onion rings
  17. A study of the Si-phase growth mechanismin thixocast (A356) alloy during hot deformation
  18. Study of hydrogen absorption of aluminum melt
  19. Modelling of work-hardening behaviour for laser welded magnesium alloy
  20. Tribological behavior of short carbon fiber or hybrid with SiCp reinforced Al alloy composites
  21. Elevated temperature compressive behavior of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloy with minor Ho addition
  22. Notifications
  23. News
https://doi.org/10.3139/146.101619
Schlagwörter für diesen Artikel
Ag–Bi–Sn system; Density; Surface tension; Lead-free solders

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR wishes all its readers and contributors a belated Happy New Year
  5. Basic
  6. Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
  7. Thermodynamic description of the ternary Pd–Sn–Zn system
  8. The morphology of nitrided iron–chromium alloys; influence of chromium content and nitrogen supersaturation
  9. The surface tension and density of Ag–Bi–Sn alloys
  10. Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys
  11. Hardening precipitation and mechanical properties in new Mg–Mn–Y–Gd alloys
  12. On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
  13. A numerical study of grain size effects on the strength and elongation of Al polycrystals using strain gradient plasticity theory
  14. Applied
  15. Thermodynamic simulation of the Bayer process
  16. The anisotropy of deformation for friction stir processed Mg alloy due to the existence of onion rings
  17. A study of the Si-phase growth mechanismin thixocast (A356) alloy during hot deformation
  18. Study of hydrogen absorption of aluminum melt
  19. Modelling of work-hardening behaviour for laser welded magnesium alloy
  20. Tribological behavior of short carbon fiber or hybrid with SiCp reinforced Al alloy composites
  21. Elevated temperature compressive behavior of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloy with minor Ho addition
  22. Notifications
  23. News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 24.12.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.101619/html?lang=de
Button zum nach oben scrollen