Startseite Technik On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies

  • Krzysztof Sztwiertnia
Veröffentlicht/Copyright: 1. März 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 99 Heft 2

Abstract

The texture and microstructure transformations during the annealing of highly cold-rolled silver, α-brass and phosphorus copper were studied using electron microscopy and calorimetry. The results imply that recrystallization is a superposition of several local processes which proceed in two stages. In all materials analyzed, the first stage is governed by oriented nucleation, comprising the nucleation of new grains in the areas of localized strain and their further growth accompanied by the generation of recrystallization twins. The orientation distributions of nuclei and the new grains of all materials analyzed have certain features in common at the beginning of recrystallization. The second stage in phosphorus copper is governed by oriented nucleation, while in silver and in α-brass, it is dominated by oriented growth of grains, characterized by low orientation pinning.

Keywords:: Copper alloys; Silver; Recrystallization; Nucleation; Textures
2 Correspondence address: Krzysztof Sztwiertnia Assoc. Prof., Institute of Metallurgy and Materials Science, Polish Academy of Sciences, ul. Reymonta 25, 30-059 Krakow, Poland., Tel.: +48 12 637 4200, Fax: +48 12 637 2192. E-mail:

References

[1] F.J.Humphreys, M.Hatherly: Recrystallization and Related Annealing Phenomena. Pergamon, Oxford(2002).Suche in Google Scholar

[2] F.J.Humphreys: Mater. Sci. Forum.467–470(2004)107.10.4028/www.scientific.net/MSF.467-470.107Suche in Google Scholar

[3] R.Sebald, G.Gottstein: Acta Mater.50(2002)1587.10.1016/S1359-6454(02)00020-4Suche in Google Scholar

[4] W.Burgers, Y.H.Liu, T.J.Tiedema: Proc. Kon. Ned. Akad. Wet. B54(1951)459.Suche in Google Scholar

[5] I.L.Dillamore, H.Katoh: Metal Sci.8(1974)73.10.1179/msc.1974.8.1.73Suche in Google Scholar

[6] C.S.Barrett: Trans. AIME.137(1940)128.Suche in Google Scholar

[7] P.A.Beck, H.Hu: Trans. AIME194(1952)83.10.1007/BF03397656Suche in Google Scholar

[8] G.Gottstein, L.S.Shvindlerman: Scripta Metall Mater.27(1992)1515.10.1016/0956-716X(92)90137-4Suche in Google Scholar

[9] V.Marx, D.Raabe, O.Engler, G.Gottstein: Texture Microstruct.28(1997)211.10.1155/TSM.28.211Suche in Google Scholar

[10] K.Sztwiertnia: Arch. Metall.41(1996)101.10.1002/(SICI)1097-0126(199610)41:2<101::AID-PI685>3.0.CO;2-NSuche in Google Scholar

[11] J.Tarasiuk, P.Gerber, K.Wierzbanowski, B.Bacroix: Mater. Sci. Forum.426–432(2003)3891.10.4028/www.scientific.net/MSF.426-432.3891Suche in Google Scholar

[12] M.Crumbach, M.Goerdeler, G.Gottstein: Acta Mater.54(2006)3275.10.1016/j.actamat.2006.03.017Suche in Google Scholar

[13] E.Lindh, B.W.Hutchinson, P.Bate: Mater. Sci. Forum.157–162(1994)997.10.4028/www.scientific.net/MSF.157-162.997Suche in Google Scholar

[14] K.Sztwiertnia, F.Haessner: Mater. Sci. Forum.157–162(1994)1291.10.4028/www.scientific.net/MSF.157-162.1291Suche in Google Scholar

[15] S.Zaefferer, T.Baudin, R.Penelle: Acta Mater.49(2001)1105.10.1016/S1359-6454(00)00387-6Suche in Google Scholar

[16] K.Sztwiertnia: Mater. Sci. Forum.408–412(2002)767.10.4028/www.scientific.net/MSF.408-412.767Suche in Google Scholar

[17] H.Paul, J.H.Driver, C.Maurice, A.Pia¸tkowski: Acta Mater.55(2007)833.10.1016/j.actamat.2006.08.061Suche in Google Scholar

[18] J.E.Bailey: Phil. Mag., 5(1960)833.10.1080/14786436008241221Suche in Google Scholar

[19] H.Hu: Electron Microscopy and Strength of Crystals, Interscience, London(1963)564.Suche in Google Scholar

[20] W.Roberts, B.Lehtinen: Phil. Mag.26(1972)1153.10.1080/14786437208227370Suche in Google Scholar

[21] W.B.Hutchinson, R.K.Ray: Phil. Mag.28(1973)953.10.1080/14786437308220997Suche in Google Scholar

[22] K.Sztwiertnia, F.Haessner: Mater. Sci. Forum.157–162(1994)1069.10.4028/www.scientific.net/MSF.157-162.1069Suche in Google Scholar

[23] W.Truszkowski, J.Król, B.Major: Met. Trans. A13(1982)665.10.1007/BF02644432Suche in Google Scholar

[24] W.F.Hemminger, H.K.Cammenga: Methods of Thermal Analysis (in German). Springer-Verlag(1989).10.1007/978-3-642-70175-7Suche in Google Scholar

[25] J.Pospiech, K.Lücke, K.Sztwiertnia: Acta Metall. Mater.41(1993)305.10.1016/0956-7151(93)90361-USuche in Google Scholar

[26] K.Sztwiertnia, F.Haessner: Texture Microstruct.20(1993)87.10.1155/TSM.20.87Suche in Google Scholar

[27] U.Schmidt, K.Lücke: Texture.3(1979)85.10.1155/TSM.3.85Suche in Google Scholar

[28] W.Liu, Y.Liu, H.Suo, H.J.Bunge: Mater. Sci. Forum.273–275(1998)503.10.4028/www.scientific.net/MSF.273-275.503Suche in Google Scholar

[29] C.Donadille, R.Valle, P.Dervin, R.Penelle: Acta Metall.37(1989)1547.10.1016/0001-6160(89)90123-5Suche in Google Scholar

[30] T.Leffers, J.B.Bilde-Sørensen: Acta Metall. Mater.38(1990)1917.10.1016/0956-7151(90)90303-XSuche in Google Scholar

[31] B.J.Duggan, M.Hatherly, W.B.Hutchinson, P.T.Wakefield: Met. Sci.12(1978)343.10.1016/0036-9748(78)90116-3Suche in Google Scholar

[32] M.Blicharski, S.Gorczyca: Met. Sci.12(1978)303.10.1016/0036-9748(78)90118-7Suche in Google Scholar

[33] W.B.Hutchinson, B.J.Duggan, M.Hatherly: Metals Techn.6(1979)398.10.1179/030716979803276598Suche in Google Scholar

[34] C.S.Da Costa Viana, J.C.Parades, A.L.Pinto, A.M.Lopez, in: J.A.Szpunar (Ed.), Proc 12th ICOTOM; Toronto(1999), 671.Suche in Google Scholar

[35] H.Paul, J.H.Driver, Z.Jasieński: Acta Mater.50(2002)815.10.1016/S1359-6454(01)00381-0Suche in Google Scholar

[36] H.Paul, J.H.Driver, C.Maurice, Z.Jasieński: Acta Mater.50(2002)4339.10.1016/S1359-6454(02)00266-5Suche in Google Scholar

[37] H.Paul, M.Darrieulat, A.Pia¸tkowski: Z. Metallkd.92(2001)1213.Suche in Google Scholar

[38] H.Paul, J.H.Driver, C.Maurice, A.Pia¸tkowski: Acta Mater.55(2007)575.10.1016/j.actamat.2006.08.051Suche in Google Scholar

[39] P.Wagner, O.Engler, K.Lücke: Acta Metall. Mater.43(1995)1921.10.1016/0956-7151(95)90164-7Suche in Google Scholar

[40] J.Hirsch, K.Lücke: Acta Metall.36(1988)2863.10.1016/0001-6160(88)90172-1Suche in Google Scholar

[41] K.H.Virnich: Ph. D. Thesis, RWTH Aachen, Germany(1979).Suche in Google Scholar

[42] R.D.Doherty, J.Szpunar: Acta Metall.32(1984)1789.10.1016/0001-6160(84)90235-9Suche in Google Scholar

[43] S.Sato: Sci Rep Tôhoku Univ.20(1931)140.Suche in Google Scholar

[44] L.M.Clarebrough, M.E.Hargreaves, M.H.Loretto: Proc. Roy. Soc. A257(1960)363.10.1098/rspa.1960.0157Suche in Google Scholar

[45] K.Sztwiertnia, F.Haessner, in: N.Hansen, Juul Jensen, D.Liu, Y.L.B.Ralph (Eds.), Proc 16th Risø Int Symp Materials Science: Microstructural and Crystallographic Aspects of Recrystallization; Roskilde: Risø National Laboratory(1995)565.Suche in Google Scholar

[46] K.Sztwiertnia: Mater. Sci. Forum.426–432(2003)3721.10.4028/www.scientific.net/MSF.426-432.3721Suche in Google Scholar

[47] K.Sztwiertnia, J.Pospiech: Archiwum Hutnictwa (in English)31(1986)627.Suche in Google Scholar

[48] M.A.Mayers, L.E.Murr: Acta Metall.26(1978)951.10.1016/0001-6160(78)90046-9Suche in Google Scholar

[49] J.P.Nielsen: Acta Metall.15(1967)1083.10.1016/0001-6160(67)90277-5Suche in Google Scholar

[50] B.Liebman, K.Lücke, G.Masing: Z. Metallkd.47(1956)57.10.1515/ijmr-1956-470201Suche in Google Scholar

[51] G.Gottstein, L.S.Shvindlerman: Grain boundary migration in metals. CRC Press(1999).Suche in Google Scholar

[52] A.D.Rollet: Mater. Sci. Forum467–470(2004)707.10.4028/www.scientific.net/MSF.467-470.707Suche in Google Scholar

[53] P.A.Beck: Acta Metall.1(1953)230.10.1016/0001-6160(53)90064-9Suche in Google Scholar

[54] D.Juul-Jensen: In Ref. [45]119.Suche in Google Scholar

[55] H.J.Bunge: Texture analysis in materials science. Butterworths Publishers, London(1982).10.1016/B978-0-408-10642-9.50010-6Suche in Google Scholar

[56] J.Pospiech, K.Lücke: Z. Metallkd.70(1979)567.10.1515/ijmr-1979-700903Suche in Google Scholar

[57] K.Detert, G.Dressler: Acta Metall.13(1965)845.10.1016/0001-6160(65)90149-5Suche in Google Scholar

[58] M.S.Masteller, C.L.Bauer: Recrystallization of Metallic Materials, F.Haessner (Ed.): Dr. Rieder Verlag GmbH, Stuttgart(1978)251.Suche in Google Scholar

[59] K.Lücke, K.Detert: Acta Metall.5(1957)628.10.1016/0001-6160(57)90109-8Suche in Google Scholar

[60] K.Lücke, H.P.Stüwe: Acta Metall.19(1971)1087.10.1016/0001-6160(71)90041-1Suche in Google Scholar

[61] J.W.Cahn: Acta Metall.10(1962)789.10.1016/0001-6160(62)90092-5Suche in Google Scholar

[62] J.Pospiech, in: G.Gottstein, K.Lücke (Eds.), Proc 5th Int Conf on Textures of Materials; Springer Verlag, Berlin(1978)97.10.1007/978-3-642-81313-9Suche in Google Scholar

Received: 2007-01-30
Accepted: 2007-10-24
Published Online: 2013-03-01
Published in Print: 2008-02-01

© 2008, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR wishes all its readers and contributors a belated Happy New Year
  5. Basic
  6. Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
  7. Thermodynamic description of the ternary Pd–Sn–Zn system
  8. The morphology of nitrided iron–chromium alloys; influence of chromium content and nitrogen supersaturation
  9. The surface tension and density of Ag–Bi–Sn alloys
  10. Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys
  11. Hardening precipitation and mechanical properties in new Mg–Mn–Y–Gd alloys
  12. On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
  13. A numerical study of grain size effects on the strength and elongation of Al polycrystals using strain gradient plasticity theory
  14. Applied
  15. Thermodynamic simulation of the Bayer process
  16. The anisotropy of deformation for friction stir processed Mg alloy due to the existence of onion rings
  17. A study of the Si-phase growth mechanismin thixocast (A356) alloy during hot deformation
  18. Study of hydrogen absorption of aluminum melt
  19. Modelling of work-hardening behaviour for laser welded magnesium alloy
  20. Tribological behavior of short carbon fiber or hybrid with SiCp reinforced Al alloy composites
  21. Elevated temperature compressive behavior of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloy with minor Ho addition
  22. Notifications
  23. News
https://doi.org/10.3139/146.101616
Schlagwörter für diesen Artikel
Copper alloys; Silver; Recrystallization; Nucleation; Textures

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. IJMR wishes all its readers and contributors a belated Happy New Year
  5. Basic
  6. Experimental study of the phase relations in the Fe–Zn–Cr system at 600°C
  7. Thermodynamic description of the ternary Pd–Sn–Zn system
  8. The morphology of nitrided iron–chromium alloys; influence of chromium content and nitrogen supersaturation
  9. The surface tension and density of Ag–Bi–Sn alloys
  10. Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys
  11. Hardening precipitation and mechanical properties in new Mg–Mn–Y–Gd alloys
  12. On recrystallization texture formation in polycrystalline fcc alloys with low stacking fault energies
  13. A numerical study of grain size effects on the strength and elongation of Al polycrystals using strain gradient plasticity theory
  14. Applied
  15. Thermodynamic simulation of the Bayer process
  16. The anisotropy of deformation for friction stir processed Mg alloy due to the existence of onion rings
  17. A study of the Si-phase growth mechanismin thixocast (A356) alloy during hot deformation
  18. Study of hydrogen absorption of aluminum melt
  19. Modelling of work-hardening behaviour for laser welded magnesium alloy
  20. Tribological behavior of short carbon fiber or hybrid with SiCp reinforced Al alloy composites
  21. Elevated temperature compressive behavior of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloy with minor Ho addition
  22. Notifications
  23. News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 24.12.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.101616/html?lang=de
Button zum nach oben scrollen