Startseite Technik Fatigue strength and fracture behavior of steels with and without interstitial carbon at room temperature in air
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Fatigue strength and fracture behavior of steels with and without interstitial carbon at room temperature in air

  • Mohammed Aminul Islam und Yo Tomota
Veröffentlicht/Copyright: 23. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 98 Heft 3

Abstract

In this study, fatigue performance and fracture behavior of interstitial-free, low carbon and phosphorus-added low carbon steels have been investigated by plane bending fatigue tests at room temperature in air. For all steels, fatigue tests were carried out at a frequency of 1000 cycles per minute, however, a limited number of specimens of low carbon steel were also tested at frequencies of 500 and 1500 cycles per minute. After all mechanical tests, fracture surfaces were cut and examined using scanning electron microscopy to identify the fracture features. At any applied stress level, low carbon steel showed better fatigue performance than interstitial-free steel, and phosphorus addition further improved the fatigue life of low carbon steel. Fractographic observations on fatigue fracture surfaces revealed transgranular fracture for low carbon steel and intergranular fracture for interstitial-free steel. Interestingly, addition of 0.12 wt.% of phosphorus in low carbon steel could not change the dominant transgranular fracture behavior of the steel.

Keywords: IF steel; Low carbon steel; Fatigue; Intergranular cracking; Transgranular fracture
* Correspondence address, Dr. M. A. Islam, JSPS Research Fellow of Professor Y. Tomota Lab, Institute of Applied Beam Science, Graduate School of Science and Engineering, Ibaraki University, 4-12-1 Nakanarusawa, Hitachi, Ibaraki 316-8511, Japan, Tel.: +81 294 38 5055, Fax: +81 294 38 5226, E-mail:

References

[1] M.T.Milan, D.Spinelli, W.W.B.Filho: Int. J. Fatigue23 (2001) 129.10.1016/S0142-1123(00)00076-1Suche in Google Scholar

[2] M.P.Renavikar: Ph.D. Thesis, University of Pittsburgh, Canada (2003).Suche in Google Scholar

[3] M.A.Islam, Y.Tomota: Int. J. Mater. Res. (formerly Z. Metallkd.)97 (2006) 1559.Suche in Google Scholar

[4] M.A.Islam: Ph.D. Thesis, The University of Birmingham, UK (2001).Suche in Google Scholar

[5] S.A.Khan, M.A.Islam: J. Mater. Eng. Perform., accepted.Suche in Google Scholar

[6] M.A.Islam, S.Chen, Y.Tomota: J. Mater. Eng. Perform., accepted.Suche in Google Scholar

[7] Steel Database (Key to Steel): (2006) 1 (available at http://www.key-to-steel.com/DE/Articles/Art137.htm).Suche in Google Scholar

[8] Y.Tomota, P.Lukas, S.Harijo, J.-H.Park, N.Tsuchida, D.Neov: Acta Mater.51 (2003) 819.10.1016/S1359-6454(02)00473-1Suche in Google Scholar

[9] N.Tsuchida, E.Baba, K.Nagai, Y.Tomota: Acta Mater.53 (2005) 265.10.1016/j.actamat.2004.09.019Suche in Google Scholar

[10] Y.Furuya, S.Matsuoka, S.Shoemaker, T.Hanamura, S.Torizuka: Scripta Mater.52 (2005) 1163.10.1016/j.scriptamat.2005.01.035Suche in Google Scholar

[11] H.Tian, P.K.Liaw, D.Fielden, L.Jian, C.R.Brooks, D.D.Bruns, M.D.Brotherton, H.Wang, J.P.Strizak, L.K.Mansur, J.R.Distefano, K.Farrell, D.C.Lousteau, S.J.Pawel, G.T.Yahr, in: P.K.Liaw (Ed.), Fatigue & Fracture Behavior of High Temperature Materials, TMS (2000) 37.Suche in Google Scholar

[12] P.K.Liaw, H.Wang, L.Jian, B.Yang, J.Y.Huang, R.C.Kuo, J.G.Huang: Scripta Mater.42 (2000) 389.10.1016/S1359-6462(99)00358-9Suche in Google Scholar

[13] I.Marines, G.Dominguez, G.Baudry, J.-F.Vottori, S.Rathery, J.-P.Doucet, C.Bathias: Int. J. Fatigue25 (2003) 1037.10.1016/S0142-1123(03)00161-0Suche in Google Scholar

[14] Y.Furuya, S.Masuoka, T.Abe, K.Yamaguchi: Scripta Mater.46 (2002) 157.10.1016/S1359-6462(01)01213-1Suche in Google Scholar

[15] J.P.Strizak, H.Tian, P.K.Liaw, L.K.Mansur: J. Nucl. Mater.1343 (2005) 134.10.1016/j.jnucmat.2005.03.019Suche in Google Scholar

[16] A.Onizawa, M.A.Islam, M.Ojima, Y.Tomota: J. Eng. Appl. Sci.1 (2006) 12.Suche in Google Scholar

[17] M.A.Islam, P.Bowen, J.F.Knott: J. Mater. Eng. Perform.14 (2005) 28.10.1361/10599490522167Suche in Google Scholar

[18] J.P.Hirth, R.W.Ballufi: Acta Met.12 (1973) 29.Suche in Google Scholar

[19] W.A.Spitzig, R.J.Sober: Metall. Trans. A8 (1977) 1585.10.1007/BF02644863Suche in Google Scholar

[20] W.A.Spitzig, R.J.Sober: Metall. Trans. A8 (1977) 651.Suche in Google Scholar

[21] S.Suzuki, S.Tanni, K.Abiko, H.Kimura: Scripta Metall.17 (1983) 1325.10.1016/0036-9748(83)90225-9Suche in Google Scholar

[22] S.Suzuki, S.Tanni, K.Abiko, H.Kimura: Metall. Trans. A18 (1987) 1109.10.1007/BF02668560Suche in Google Scholar

[23] K.S.Shin, B.H.Tsao: Scripta Metall.22 (1988) 585.10.1016/S0036-9748(88)80164-9Suche in Google Scholar

[24] M.Guttmann: Metall. Trans. A8 (1977) 1383.10.1007/BF02642852Suche in Google Scholar

[25] G.Gouthama, R.Balasubramaniam: Bull. Mater. Sci.26 (2003) 483.10.1007/BF02707345Suche in Google Scholar

[26] V.Rangarajan, R.Toncheff, L.L.Franks: Metall. Mater. Trans. A29 (1998) 2707.10.1007/s11661-998-0311-ySuche in Google Scholar

[27] P.Maier, R.G.Faulkner, P.Spellward, J.R.Cowan: Mater. Sci. Technol.17 (2001) 1377.10.1179/026708301101509584Suche in Google Scholar

[28] J.Takahashi, M.Sugiyama, N.Maruyama: Nippon Steel Tech. Report No.91 (2005).Suche in Google Scholar

Received: 2006-10-30
Accepted: 2006-12-21
Published Online: 2013-05-23
Published in Print: 2007-03-01

© 2007, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Texture and microstructure evolution of ECAP processed AlMg1Mn0.14 alloy
  5. Modelling grain refinement in fcc metals during equal-channel angular pressing by route “C”
  6. Fabrication of high strength nanostructured aluminium alloys by hydrostatic extrusion
  7. Comparison of the plastic strain distribution during equal-channel angular pressing (ECAP) using 2D and 3D FEM modeling
  8. Deformation twins in ultrafine grained commercial aluminum
  9. Compressive behaviour of ultrafine-grained AA6063T6 over a wide range of strains and strain rates
  10. Grain refinement response during twist extrusion of an Al-0.13% Mg alloy
  11. Preparation of NiO–LiFeO2 solid solutions: the role of mechanical and thermal treatments
  12. Applied
  13. Fatigue strength and fracture behavior of steels with and without interstitial carbon at room temperature in air
  14. The influence of Nd on the corrosion behavior of electroless-deposited Fe–P
  15. Time-dependent directional solidification of binary Al–Cu alloys in the initial transient
  16. Effect of V2O5 doping on the microstructure and local composition of textured Sr0.4Ba0.6Nb2O6 ceramics
  17. Microstructure and mechanical properties of AZ91D alloy prepared by a semi-solid diecasting process
  18. Development of SMD 32.768 kHz tuning fork type crystals
  19. Notifications
  20. DGM News
https://doi.org/10.3139/146.101460
Schlagwörter für diesen Artikel
IF steel; Low carbon steel; Fatigue; Intergranular cracking; Transgranular fracture

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Texture and microstructure evolution of ECAP processed AlMg1Mn0.14 alloy
  5. Modelling grain refinement in fcc metals during equal-channel angular pressing by route “C”
  6. Fabrication of high strength nanostructured aluminium alloys by hydrostatic extrusion
  7. Comparison of the plastic strain distribution during equal-channel angular pressing (ECAP) using 2D and 3D FEM modeling
  8. Deformation twins in ultrafine grained commercial aluminum
  9. Compressive behaviour of ultrafine-grained AA6063T6 over a wide range of strains and strain rates
  10. Grain refinement response during twist extrusion of an Al-0.13% Mg alloy
  11. Preparation of NiO–LiFeO2 solid solutions: the role of mechanical and thermal treatments
  12. Applied
  13. Fatigue strength and fracture behavior of steels with and without interstitial carbon at room temperature in air
  14. The influence of Nd on the corrosion behavior of electroless-deposited Fe–P
  15. Time-dependent directional solidification of binary Al–Cu alloys in the initial transient
  16. Effect of V2O5 doping on the microstructure and local composition of textured Sr0.4Ba0.6Nb2O6 ceramics
  17. Microstructure and mechanical properties of AZ91D alloy prepared by a semi-solid diecasting process
  18. Development of SMD 32.768 kHz tuning fork type crystals
  19. Notifications
  20. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 1.2.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.101460/html?lang=de
Button zum nach oben scrollen