Contents

Articles in the same Issue

1. Contents
2. Contents
3. Basic
4. The effect of bismuth segregation on the faceting of Σ3 and Σ9 coincidence boundaries in copper bicrystals
5. Viscosity measurement of liquid ternary Cu–Ni–Fe alloys by an oscillating cup viscometer and comparison with models
6. Isothermal oxidation behavior of a precipitation-hardened Pt-base alloy with additions of Al, Cr and Ni
7. Bismuth activity measurements and thermodynamic re-optimization of the Ni–Bi System
8. Modelling of the β → α + β transformation in a metastable β Ti alloy based on the growth kinetics and the morphology of the α plates
9. The microstructure of ball milled nanocrystalline vanadium; variation of the crystal imperfection and the lattice parameter
10. Study of interfacial reactions between Sn–Ag–Cu alloys and Au substrate
11. Applied
12. On the precipitation processes in commercial QE22 magnesium alloy
13. Cyclic deformation behavior of deep rolled as-quenched aluminium alloy AA6110 at elevated temperatures
14. Effect of Ho additions on the microstructure and mechanical properties of Nb-22Ti-16Si-7Cr-3Al-3Ta-2Hf alloys
15. Improved mechanical properties of the high pressure die casting alloy AlSi9Cu3(Fe)(Zn) as a result of the combination of natural and artificial ageing
16. Effect of quenching temperature on the microstructure and mechanical properties of Fe–B–Ti alloy
17. A kinetic study of nickel coating on boron nitride micro-particles
18. Thermal diffusivity measurements of some industrially important alloys by a laser flash method
19. Notifications
20. DGM News