Skip to main content
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: August 17, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 104 Issue 4

Published Online: 2013-08-17
Published in Print: 2013-04-11

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Modeling the effect of austenite deformation on the bainite structure parameters in low carbon microalloyed steels
  5. The precipitation of η phase in an Fe-Ni-based superalloy with different Ti/Al ratios
  6. Growth kinetics of aluminum-bearing intermetallic layer on tool steel
  7. Thermodynamic modeling of the Ba–Mg binary system
  8. Partial isothermal section of the Dy-Co-Ga ternary system at 500°C
  9. Solubility study of the copper-lead system
  10. Solidification of primary Si in electromagnetically levitated Al-50%Si undercooling melts
  11. Microstructure and mechanical properties of as-cast and solution-treated Mg-Zn-Gd-based alloys reinforced with quasicrystals
  12. Fabrication of micro/nano structured aluminum–nickel energetic composites by means of ultrasonic powder consolidation
  13. Study of an Al-Si-Cu HPDC alloy with high Zn content for the production of components requiring high ductility and tensile properties
  14. Characterization of silicon-silicon carbide ceramic derived from carbon-carbon silicon carbide composites
  15. Mechanochemical and combustion synthesis of CeB6
  16. Nanomechanical studies and materials characterization of metal/polymer bilayer MEMS cantilevers
  17. DGM News
  18. DGM News
https://doi.org/10.3139/146.013044

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Modeling the effect of austenite deformation on the bainite structure parameters in low carbon microalloyed steels
  5. The precipitation of η phase in an Fe-Ni-based superalloy with different Ti/Al ratios
  6. Growth kinetics of aluminum-bearing intermetallic layer on tool steel
  7. Thermodynamic modeling of the Ba–Mg binary system
  8. Partial isothermal section of the Dy-Co-Ga ternary system at 500°C
  9. Solubility study of the copper-lead system
  10. Solidification of primary Si in electromagnetically levitated Al-50%Si undercooling melts
  11. Microstructure and mechanical properties of as-cast and solution-treated Mg-Zn-Gd-based alloys reinforced with quasicrystals
  12. Fabrication of micro/nano structured aluminum–nickel energetic composites by means of ultrasonic powder consolidation
  13. Study of an Al-Si-Cu HPDC alloy with high Zn content for the production of components requiring high ductility and tensile properties
  14. Characterization of silicon-silicon carbide ceramic derived from carbon-carbon silicon carbide composites
  15. Mechanochemical and combustion synthesis of CeB6
  16. Nanomechanical studies and materials characterization of metal/polymer bilayer MEMS cantilevers
  17. DGM News
  18. DGM News
Downloaded on 19.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.013044/html
Scroll to top button