Home Assessment of FEMAXI and TESPA-ROD codes for modelling of BDBA in RBMK-1500
Article
Licensed
Unlicensed Requires Authentication

Assessment of FEMAXI and TESPA-ROD codes for modelling of BDBA in RBMK-1500

  • A. Jusevičiu-tė , A. Kaliatka , E. Urbonavičius , G. Duškesas , L. Juodis and H. G. Sonnenburg
Published/Copyright: April 5, 2013
Become an author with De Gruyter Brill

Abstract

Processes occurring during the reactor operation and accidents change the thermal, chemical and other properties in nuclear fuel rods. This paper describes the processes in the nuclear fuel rods and tools for simulation at these processes. Fuel rods used at Ignalina NPP were simulated with FEMAXI-V (Japan) and TESPA-ROD (Germany) codes. Developed models were employed for the analysis of processes in fuel rods in case of large LOCA Beyond Design Basis Accident (BDBA). The developed models and results of the analysis are presented in this paper.

Kurzfassung

Prozesse, die während des Reaktorbetriebes und bei Störfällen stattfinden, ändern die thermischen, chemischen und anderen Eigenschaften in Brennelementen. Dieser Beitrag beschreibt die Prozesse in den Brennelementen und Tools für die Simulation dieser Prozesse. Die im Kernkraftwerk Ignalina eingesetzten Brennelemente wurden mit FEMAXI-V (Japan) und TESPA-ROD (Deutschland) Codes simuliert. Die entwickelten Modelle wurden für die Analyse von Prozessen in Brennelementen unter Annahme eines Kühlmittelverluststörfalls für auslegungsüberschreitende Ereignisse verwendet. Die entwickelten Modelle und Ergebnisse der Analyse werden in diesem Beitrag vorgestellt.

References

1 Pierro, F.; Moretti, F.; Mazzini, D.; D'Auria, F.: Analysis of Fuel Pin Mechanics in Case of Flow Blockage of a Single RBMK Channel. Proc. of the Conference “Nuclear Energy for New Europe”, 2005Search in Google Scholar

2 Almenas, K.; Kaliatka, A.; Ušpuras, E.: Ignalina RBMK-1500. A Source Book (extended and updated version), Lithuanian Energy Institute, 1998Search in Google Scholar

3 Suzuki, M.: Ligh water reactor fuel analysis code FEMAXI-V (ver. 1), Japan Atomic Energy Research Institute2000 SeptemberSearch in Google Scholar

4 Sonnenburg, H. G.; Hofer, E.; Kloos, A.: Development of methods for the analysis of the fuel rod behaviour in the high burn-up regime, Final Report. GRS, 2002 NovemberSearch in Google Scholar

5 Berna, G.; Allison, C.: Development of FUELSIM/MOD0 for the Detailed Analysis of LWR Fuel Rod Behavior under Normal Operation Conditions with Extended Burnup Fuel. Nippon Genshiryoku Kenkyujo JAERI journalL2150A, (1999), p. 252255Search in Google Scholar

6 Lassmann, K.: TRANSURANUS: a fuel rod analysis code ready for use. Journal of Nuclear Materials188 (1992) 295302Search in Google Scholar

7 Sonnenburg, H. G.: Fuel rod behavior and accident condition analyses with TRESAP-ROD. Towards convergence of technical nuclear safety practices in EuropeSearch in Google Scholar

8 Ušpuras, E.; Kaliatka, A.; Urbonas, R.: Evaluation of non-regular means for heat removal from RBMK reactor core in case of BDBA. Proc. of the 12th Int. Topical Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-12), Pittsburgh, Pennsylvania, U.S.A. September 30-October 4, 2007, CD p. 114Search in Google Scholar

9 Ignalina NPP ICS database (Ignalina NPP second reactor unit condition on 2006-01-27)Search in Google Scholar

10 Interim Safety Justification for INPP DSS. Section 3. Accident Analysis. Version 3C. Volume 3. Data Systems & Solutions report No. XE405-TEC040-1, January 2003Search in Google Scholar

11 Fletcher, C. D.et al.: RELAP5/MOD3 code manual user's guidelines, Idaho National Engineering Lab., NUREG/CR-5535 (1992)Search in Google Scholar

12 Ignalina NPP Safety Analysis Report. Volume 3Task Group 5, VATTENFALL, 1996Search in Google Scholar

Received: 2008-1-23
Published Online: 2013-04-05
Published in Print: 2008-09-01

© 2008, Carl Hanser Verlag, München

Downloaded on 29.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/124.100558/html
Scroll to top button