Startseite Influence factors of pop-in in the nanoindentation micromechanical property measurement of gas-bearing shale
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Influence factors of pop-in in the nanoindentation micromechanical property measurement of gas-bearing shale

  • Ligeng Wang , Yuanzhong Zhang und Wensheng Wu
Veröffentlicht/Copyright: 26. September 2019
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

Studying the micromechanical properties of gas-bearing shale is very important for understanding it. In the nanoindentation measurement of gas-bearing shale, the load-displacement curve often shows pop-in at the loading stage, namely the change of load is small but the change of penetration depth is large. Pop-in can introduce a large error in the calculation of the mechanical parameter. To investigate the influence factors of pop-in, the maximum load, load rate and sample characteristics have been addressed. The results show that pop-in is related to cracks and pores in the shale. Due to the heterogeneity of shale, pop-in cannot be avoided, but can be reduced by choosing reliable load modes and test parameters. Pop-in can increase the maximum indentation depth and decrease the elastic modulus and hardness. The influence of pop-in on hardness is larger than on the elastic modulus. At a high load rate it is easy to induce pop-in. The influence of the load rate on pop-in is larger than that of the maximum load.


Correspondence Address, Assoc. Prof. Dr. Yuanzhong Zhang, State Key Laboratory of, Petroleum Resources and Prospecting, China University of Petroleum Beijing, Beijing 102249, P. R. China, E-mail:

Ligeng Wang, born 1993, graduated from China University of Petroleum, Beijing in 2016 and received his Bachelor's Degree. Now he is a PHD Candidate at the China University of Petroleum, Beijing. His current research interests focus on petrophysics and logging interpretation.

Yuanzhong Zhang, born 1971, graduated from the China University of Petroleum, Beijing in 2000 and gained his PhD. Currently, he is an Associated Professor at the China University of Petroleum, Beijing. His current research interests focus on petrophysics and logging interpretation.

Wensheng Wu, born 1972, graduated from the China University of Petroleum (East China) in 2001 and received his PhD. Currently, he is a Professor at the China University of Petroleum, Beijing. His current research interests focus on nuclear logging.


References

1 M.Curtis, B.Cardott, C.Sondergeld, C.Rai: Development of organic porosity in the woodford shale with increasing thermal maturity, International Journal of Coal Geology103 (2012), No. 1, pp. 263110.1016/j.coal.2012.08.004Suche in Google Scholar

2 M.Goodarzi, M.Rouainia, A.Aplin, P.Cubillas, M.Block: Predicting the elastic response of organic-rich shale using nanoscale measurements and homogenisation methods, Geophysical Prospecting65 (2017), No. 6, pp. 1597161410.1111/1365-2478.12475Suche in Google Scholar

3 C.Li, M.Ostadhassan, T.Gentzis, L.Kong, H.Carvajal-Ortiz, B.Bubach: Nanomechanical characterization of organic matter in the bakken formation by microscopy-based method, Marine and Petroleum Geology96 (2018), pp. 12813810.1016/j.marpetgeo.2018.05.019Suche in Google Scholar

4 K.Katahara: What is shale to a petrophysicist?Leading Edge27(2012), No. 6, pp. 73874110.1190/1.2944158Suche in Google Scholar

5 H.Sone, M.Zoback: Mechanical properties of shale-gas reservoir rocks – Part 1: Static and dynamic elastic properties and anisotropy, Geophysics78 (2013), No. 5, D381D39210.1190/geo2013-0050.1Suche in Google Scholar

6 H.Sone, M.Zoback: Mechanical properties of shale-gas reservoir rocks – Part 2: ductile creep, brittle strength, and their relation to the elastic modulus, Geophysics78 (2013), No. 5, pp. D393D40210.1190/geo2013-0051.1Suche in Google Scholar

7 L.Vernik, J.Milovac: Rock physics of organic shales, Leading Edge30 (2011), No. 3, pp. 31832310.1190/1.3567263Suche in Google Scholar

8 H.Xu, W.Zhou, R.Xie, L.Da, C.Xiao, Y.Shan, H.Zhang: Characterization of rock mechanical properties using lab tests and numerical interpretation model of well logs, Mathematical Problems in Engineering2016 (2016), pp. 11310.1155/2016/5967159Suche in Google Scholar

9 S.Yin, W.Ding, Y.Shan, W.Zhou, R.Wang, X.Zhou, A.Li, J.He: A new method for assessing Young's modulus and Poisson's ratio in tight interbedded clastic reservoirs without a shear wave time difference, Journal of Natural Gas Science and Engineering Part A36 (2016), pp. 26727910.1016/j.jngse.2016.10.033Suche in Google Scholar

10 A.Abbas, R.Flori, M.Alsaba, H.Dahm, E.Alkamil: Integrated approach using core analysis and wireline measurement to estimate rock mechanical properties of the Zubair Reservoir, Southern Iraq, Journal of Petroleum Science and Engineering166 (2018), pp. 40641910.1016/j.petrol.2018.03.057Suche in Google Scholar

11 V.Kumar, M.Curtis, N.Gupta, C.Sondergeld, C.Rai: Estimation of elastic properties of organic matter in Woodford shale through nanoindentation measurements, Proc. of the Canadian Unconventional Resources Conference, Society of Petroleum Engineers, Calgary (2012), pp. 11110.2118/162778-MSSuche in Google Scholar

12 S.Dang, C.Sondergeld, C.Rai: Recovering elastic properties from rock fragments, Petrophysics58 (2017), No. 3, pp. 270280Suche in Google Scholar

13 F.-J.Ulm, Y.Abousleiman: The nanogranular nature of shale, Acta Geotechnica, 1 (2006), No. 2, pp. 778810.1007/s11440-006-0009-5Suche in Google Scholar

14 G.Zhang, Z.Wei, R.Ferrell: Elastic modulus and hardness of muscovite and rectorite determined by nanoindentation, Applied Clay Science43 (2009), No. 2, pp. 27128110.1016/j.clay.2008.08.010Suche in Google Scholar

15 C.Bobko: Material Invariant Properties and Reconstruction of Microstructure of Sandstones by Nanoindentation and Microporoelastic Analysis, PhD Thesis, Massachusetts Institute of Technology, Cambridge, MA, USA (2005)Suche in Google Scholar

16 B.Osni: Elastic Properties of Carbonates: Measurements and Modelling, PhD Thesis, Curtin University, Perth, Australia (2011)Suche in Google Scholar

17 H.Ban, P.Karki, Y.Kim: Nanoindentation test Integrated with numerical simulation to characterize mechanical properties of rock materials, Journal of Testing and Evaluation42 (2014), No. 3, pp. 11010.1520/JTE20130035Suche in Google Scholar

18 H.Yu, Y.Zhang, M.Lebedev, T.Han, M.Verrall, Z.Wang, E.Al-Khdheeawi, A.Al-Yaseri, S.Lglauer: Nanoscale geomechanical properties of Western Australian coal, Journal of Petroleum Science and Engineering162 (2018), pp. 73674610.1016/j.petrol.2017.11.001Suche in Google Scholar

19 H.Yang, S.Luo, G.Zhang, J.Song: Elasticity of clay shale characterized by nanoindentation, Proc. of the 51st U. S. Symposium on Rock Mechanics/Geomechanics, San Francisco (2017), pp. 17Suche in Google Scholar

20 C.Bobko, B.Gathier, J.Ortega, F.-J.Ulm, L.Borges, Y.Abousleiman: The nanogranular origin of friction and cohesion in shale – A strength homogenization approach to interpretation of nanoindentation results, International Journal for numerical and analytical methods in geomechanics35 (2011), No. 17, pp. 1854187610.1002/nag.984Suche in Google Scholar

21 V.Kumar, C.Sondergeld, C.Rai: Effect of mineralogy and organic matter on mechanical properties of shale, Interpretation3 (2015), No. 3, pp. SV9SV1510.1190/int-2014-0238.1Suche in Google Scholar

22 S.Abedi, M.Slim, R.Hofmann, T.Bryndzia, F.-J.Ulm: Nanochemo-mechanical signature of organic-rich shales: a coupled indentation–EDX analysis, Acta Geotechnica11 (2016), No. 3, pp. 11410.1007/s11440-015-0426-4Suche in Google Scholar

23 K.Alstadt, K.Katti, D.Katti: Nanoscale morphology of kerogen and in situ nanomechanical properties of green river oil shale, Journal of Nanomechanics and Micromechanics6 (2016), No. 1, pp. 04015003 10.1061/(ASCE)NM.2153-5477.0000103Suche in Google Scholar

24 S.Zargari, T.Wilkinson, C.Packard, M.Prasad: Effect of thermal maturity on elastic properties of kerogen, Geophysics81 (2016), No. 2, pp. M1M610.1190/geo2015-0194.1Suche in Google Scholar

25 C.Valdes, Z.Heidari, A.Gonzalez: Quantifying the impacts of thermal maturity on elastic properties of kerogen, Proc. of the SPWLA 58th Annual Logging Symposium, Oklahoma, USA (2017), pp. 112Suche in Google Scholar

26 C.Auvray, G.Arnold, G.Armand: Experimental study of elastic properties of different constituents of partially saturated argillite using nano-indentation tests, Engineering Geology191 (2015), pp. 617010.1016/j.enggeo.2015.02.010Suche in Google Scholar

27 J.Berthonneau, C.Hoover, O.Grauby, A.Baronnet, R.Pellenq, F.-J.Ulm: Crystal-chemistry control of the mechanical properties of 2:1 clay minerals, Applied Clay Science143 (2017), pp. 38739810.1016/j.clay.2017.04.010Suche in Google Scholar

28 K.Bennett, L.Berla, W.Nix, R.Borja: Instrumented nanoindentation and 3d mechanistic modeling of a shale at multiple scales, Acta Geotechnica10 (2015), No. 1, pp. 11410.1007/s11440-014-0363-7Suche in Google Scholar

29 K.Liu, M.Ostadhassan, B.Bubach: Applications of nano-indentation methods to estimate nanoscale mechanical properties of shale reservoir rocks, Journal of Natural Gas Science and Engineering Part A35 (2016), pp. 1310131910.1016/j.jngse.2016.09.068Suche in Google Scholar

30 W.Oliver, G.Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation, Journal of Materials Research7 (1992), No. 6, pp. 1564158310.1557/JMR.1992.1564Suche in Google Scholar

31 W.Oliver, G.Pharr: Measurement of hardness and elastic modulus by instrumented indentation, advances in understanding and refinements to methodology, Journal of Materials Research19 (2004), No. 1, pp. 32010.1557/jmr.2004.19.1.3Suche in Google Scholar

32 T.Chudoba, F.Richter: Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results, Surface and Coatings Technology148 (2001), No. 2-3, pp. 19119810.1016/S0257-8972(01)01340-8Suche in Google Scholar

33 G.Feng, A.Ngan: Effects of creep and thermal drift on modulus measurement using depth-sensing indentation, Journal of Materials Research17 (2002), No. 3, pp. 66066810.1557/JMR.2002.0094Suche in Google Scholar

34 W.Li, A.Sakhaee-Pour: Macroscale Young's moduli of shale based on nanoindentations, Petrophysics57 (2016), No. 6, pp. 597603Suche in Google Scholar

35 H.Sone, M.Zoback: Time-dependent deformation of shale gas reservoir rocks and its long-term effect on the in situ state of stress, International Journal of Rock Mechanics and Mining Sciences69 (2014), pp. 12013210.1016/j.ijrmms.2014.04.002Suche in Google Scholar

36 S.Mighani, S.Taneja, C.Sondergeld, C.Rai: Nanoindentation Creep Measurements on Shale, Proc. of the 49th US Symposium on Rock Mechanics/Geomechanics, San Francisco, California, USA (2015), pp. 17Suche in Google Scholar

37 X.Guo: Enrichment Mechanism and Exploration Technology of Fuling Limestone Gas Field, 1st Ed., Science Press, Beijing, P. R. China (2014)Suche in Google Scholar

Published Online: 2019-09-26
Published in Print: 2019-10-02

© 2019, Carl Hanser Verlag, München

Heruntergeladen am 23.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/120.111410/html?lang=de
Button zum nach oben scrollen