Coating Distribution Depending on Surface Microgeometry
-
Biserka Runje
Abstract
This paper investigates the effects of surface microgeometry on coating thickness, both theoretically and experimentally. In the theoretical part of the paper, surface roughness parameters are analyzed and basic definitions and general requirements on coating quality defined. The experimental part of the paper gives a calculation for the coating quantity required in order to fill “dead volume” depending on surface roughness. Coating distribution is analyzed using scanning electronic microscopy (SEM). The paper also evaluates quality of a measuring system using magnetic method for measuring coating thickness.
Abstract
In der diesem Beitrag zugrunde liegenden Studie wurden die Auswirkungen der Oberflächenmikrogeometrie auf die Beschichtungsdicke theoretisch und experimentell untersucht. Im theoretischen Teil des Beitrages werden die Oberflächenrauheitsparameter analysiert und grundlegende Definitionen sowie generelle Anforderungen an die Beschichtungsqualität definiert. Der experimentelle Teil des Beitrages beschreibt eine Berechnung der erforderlichen Beschichtungsmenge, um das Totvolumen abhängig von der Oberflächenrauheit zu füllen. Die Verteilung der Beschichtung wurde mittels Rasterelektronenmikroskopie (REM) untersucht. Im Beitrag wird außerdem die Qualität eines magnetischen Messsystems für die Schichtdickenmessung evaluiert.
References
1 R. K.Leach: The Measurement of Surface Texture Using Stylus Instruments, Measurement Good Practice Guide No. 37, UK National Physical Laboratory (2001)Search in Google Scholar
2 R. K.Leach, L.Brown, X.Jiang, R.Blunt, M.Conroy, D.Mauger: Guide to the measurement of smooth surface topography using coherence scanning interferometry, Measurement Good Practice Guide No. 108, UK National Physical Laboratory (2008)Search in Google Scholar
3 V.Alar, I.Stojanović, I.Mihalic: Protection of steel by waterborne coatings, Materials Protection52 (2011), No. 3, pp. 201–203Search in Google Scholar
4 V.Alar, I.Stojanović, B.Židov: Dependence of steel workpiece corrosion rate on the emulsion concentration for machining, Materials Testing54 (2012), pp. 314–317Search in Google Scholar
5 M.Marković, I.Stojanović, B.Runje: Propagataion of nonlinear phenomena in a measurement sequence, Interdisciplinary Description of Complex Systems10 (2012), No. 1, pp. 50–56Search in Google Scholar
6 D.Markucic, B.Runje, J.Stepanic: Assessment of Uncertainty in Modeled Ultrasonic Thickness Measurements, Materials Testing53 (2011), No. 4, pp. 233–238Search in Google Scholar
7 V.Alar, B.Runje, G.Baršić: Influence of surface texture on electrochemical potential, Materialwissenschaft und Werkstofftechnik41 (2010), pp. 875–87810.1002/mawe.201000632Search in Google Scholar
8 C. P.Dillon: Cleaning, Pickling, and Passivation of Stainless Steels, Materials Performance33 (1994), pp. 62–64Search in Google Scholar
© 2013, Carl Hanser Verlag, München
Articles in the same Issue
- Inhalt/Contents
- Inhalt
- Fachbeiträge/Technical Contributions
- A Numerical Study on the Mechanical Properties and the Processing Behaviour of Composite High Strength Steels
- Coating Distribution Depending on Surface Microgeometry
- Sea Water Effect on Failure Behaviour of Mechanically Fastened Composites
- Synchrotron-Radiographie und -Tomographie einer PEM-Brennstoffzelle
- Fatigue Behaviour Monitoring of an AISI 1045 Carbon Steel using the Statistical-Based Z-Notched Approach
- Stress Analyses of Pump Gears Produced by Powder Metallurgy
- Surface Roughness Changes on β-Titanium Orthodontic Wires after Corrosion in Various Artificial Saliva Solutions
- 3D-Schallfeldsteuerung mit Matrixarrays für die Pipelineprüfung
- Evaluation of Geometric Accuracy and Thickness Variation in Incremental Sheet Forming Process
- The Effects of Process Parameters on the Recycling Efficiency of Used Aluminium Beverage Cans (UBCs)
- Processing of Finely disseminated Saudi Iron Ores
- Experimental and theoretical investigations on diffusion process for rare earth ores
- Vorschau/Preview
- Vorschau
- Kalender/Calendar
- Kalender
Articles in the same Issue
- Inhalt/Contents
- Inhalt
- Fachbeiträge/Technical Contributions
- A Numerical Study on the Mechanical Properties and the Processing Behaviour of Composite High Strength Steels
- Coating Distribution Depending on Surface Microgeometry
- Sea Water Effect on Failure Behaviour of Mechanically Fastened Composites
- Synchrotron-Radiographie und -Tomographie einer PEM-Brennstoffzelle
- Fatigue Behaviour Monitoring of an AISI 1045 Carbon Steel using the Statistical-Based Z-Notched Approach
- Stress Analyses of Pump Gears Produced by Powder Metallurgy
- Surface Roughness Changes on β-Titanium Orthodontic Wires after Corrosion in Various Artificial Saliva Solutions
- 3D-Schallfeldsteuerung mit Matrixarrays für die Pipelineprüfung
- Evaluation of Geometric Accuracy and Thickness Variation in Incremental Sheet Forming Process
- The Effects of Process Parameters on the Recycling Efficiency of Used Aluminium Beverage Cans (UBCs)
- Processing of Finely disseminated Saudi Iron Ores
- Experimental and theoretical investigations on diffusion process for rare earth ores
- Vorschau/Preview
- Vorschau
- Kalender/Calendar
- Kalender
