Contents

Artikel in diesem Heft

1. Inhalt/Contents
2. Contents
3. Fachbeiträge/Technical Contributions
4. Mechanical properties of cryogenically treated AA5083 friction stir welds
5. Fatigue life evaluation of composite wing spar cap materials
6. Effect of Cu addition on porous NiTi SMAs produced by self-propagating high-temperature synthesis
7. Optimized random sampling for the load level method in Wöhler tests
8. Monte Carlo simulation and evaluation of burst strength of pressure vessels
9. Stress analysis of a Wankel engine eccentric shaft under varied thermal conditions
10. Effectiveness of Ti micro-alloying for the suppression of Fe impurities in AZ91 Mg alloys and associated corrosion properties
11. Mechanical properties of hybrid fiber reinforced concrete and a nondestructive evaluation
12. Multi-objective optimization of an intersecting elliptical pressure hull as a means of buckling pressure maximizing and weight minimization
13. Preload dependent material properties of lamination stacks for electric machines
14. Effect of inoculant type and treatment material quantity on properties of vermicular graphite cast iron rail vehicle brake discs
15. Effects of the chemical treatment of avocado pear wood filler on the properties of LDPE composites
16. Uncertainty analysis of cutting parameters during grinding based on RSM optimization and Monte Carlo simulation
17. Applicability of compact tension specimens for evaluation of the plane-strain fracture toughness of steel