Horizontal Penetration of Gas-Liquid Spray Jets in Gas-Solid Fluidized Beds

Artikel in diesem Heft

1. Review
2. Industrial Applications of Reactive Distillation: Recent Trends
3. Phase Mixing Modeling in Multiphase Reactors Containing Gas Bubble: a Review.
4. Article
5. Numerical Aspects of Bubble Column Simulations
6. Reactor Operating Strategy and Secondary Nucleation in Emulsion Polymerization
7. Combined Mechanistic and Empirical Modelling
8. The Catalytic Evaluation of Structured Zeolite Catalysts
9. A Mechanistic Model for the Water Gas Shift Reaction Over Commercial Catalysts Containing CuO/ZnO
10. Catalytic Pyrolysis of Difluorochloromethane to Produce Tetrafluoroethylene
11. Radial Profiles of Particle Velocity in a Large Scale CFB Downer
12. Nonlinear Dynamic Analysis of the Local Heat Transfer Rate in Three-Phase Reactors
13. Conversion of Synthesis Gas into Light Hydrocarbons. Modelling of the Catalytic Reaction Network
14. Influence of the Preparation Method and Metal Precursor Compound on Alumina-Supported Pd Catalysts
15. A 3D Model of Combustion in Large-Scale Circulating Fluidized Bed Boilers
16. Gas and Solid Mixing in High-Density CFB Risers
17. A Local Model for Gas-Liquid Mass Transfer in a Gas-Liquid-Solid Circulating Fluidized Bed
18. A Hybrid Methodology For On-Line Process Monitoring
19. A Laboratory Steam-Cracking Reactor to Characterize Raw Materials
20. Modeling, Simulation and Optimal Control of Ethylene Polymerization in Non-Isothermal, High-Pressure Tubular Reactors
21. A Parametric Study of the Oxygen Elimination Process in a Packed Bed
22. Flow Generated by Radial Flow Impellers: PIV Measurements and CFD Simulations
23. Enhanced Reactor Performance with Pressure and Vacuum Swing Reaction
24. Characterization and Selection of Materials for Air Biofiltration in Fluidized Beds
25. Control and Optimization of a Three Phase Industrial Hydrogenation Reactor
26. Horizontal Penetration of Gas-Liquid Spray Jets in Gas-Solid Fluidized Beds
27. Optimization of Flow Shear Stress Through a Network of Capillary Fibers With the Use of CFD
28. Oxygen Distribution in Packed Bed Membrane Reactors For Partial Oxidation Systems and its Effect On Product Selectivity
29. Wastewater Minimisation Using a Heuristic Procedure
30. Characterization of Fluidization Quality in Fluidized Beds of Wet Particles
31. Numerical and Experimental Investigations into The Effect of Gap Between Baffle and Wall on Mixing in an Oscillatory Baffled Column
32. Alternative Designs for Fixed Bed Catalytic Reactors
33. Hydrodynamic and Mass Transfer Parameters in Agitated Reactors Part I: Critical Mixing Speed, Induced Gas Flow Rate, and Wavy Surface in SARs and GIRs
34. Application of CFD Modelling Technique in Engineering Calculations of Three-Phase Flow Hydrodynamics in a Jet-Loop Reactor
35. 3-D Modeling of Liquid Injection into Fluidized Beds
36. Conference Presentation
37. Granular Flows and Gas Fluidization
38. Elastic Granular Flows
39. Multi-fluid CFD modelling of fluidised bed reactors
40. Chemical Reaction Engineering, the Environment, Pollution Prevention and Sustainable Development
41. Gas-Liquid-Solid Fluidization: Perspectives
42. Short Communication or Note
43. Catalytic Drying of Digested Sludge
44. Enhancement of the Distribution of a Liquid Sprayed Into a Fluidized Bed