Nonlinear Dynamic Analysis of the Local Heat Transfer Rate in Three-Phase Reactors
-
, , and
In this present work, nonlinear dynamic analysis was performed to the fluctuation signals of the local heat transfer rate measured in three-phase reactors of different scales to characterize the dynamics of three-phase reactors. The results of nonlinear test with surrogate data give evidence of nonlinear determinism in heat transfer rates series. The chaotic nature of the local heat transfer rate was further characterized in terms of the correlation dimension and Kolmogorov entropy. It was found that the correlation dimensions were in the range between 2.0 and 4.0 and Kolmogorov entropies were varied with the change of measurement positions and the operating conditions. With the increase of column scale or the addition of solids, Kolmogorov entropies decrease significantly. The dependence of chaotic parameters on the column scale is considered to be closely related to the different macroscopic flow structures observed in three-phase reactors of different scales.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Articles in the same Issue
- Review
- Industrial Applications of Reactive Distillation: Recent Trends
- Phase Mixing Modeling in Multiphase Reactors Containing Gas Bubble: a Review.
- Article
- Numerical Aspects of Bubble Column Simulations
- Reactor Operating Strategy and Secondary Nucleation in Emulsion Polymerization
- Combined Mechanistic and Empirical Modelling
- The Catalytic Evaluation of Structured Zeolite Catalysts
- A Mechanistic Model for the Water Gas Shift Reaction Over Commercial Catalysts Containing CuO/ZnO
- Catalytic Pyrolysis of Difluorochloromethane to Produce Tetrafluoroethylene
- Radial Profiles of Particle Velocity in a Large Scale CFB Downer
- Nonlinear Dynamic Analysis of the Local Heat Transfer Rate in Three-Phase Reactors
- Conversion of Synthesis Gas into Light Hydrocarbons. Modelling of the Catalytic Reaction Network
- Influence of the Preparation Method and Metal Precursor Compound on Alumina-Supported Pd Catalysts
- A 3D Model of Combustion in Large-Scale Circulating Fluidized Bed Boilers
- Gas and Solid Mixing in High-Density CFB Risers
- A Local Model for Gas-Liquid Mass Transfer in a Gas-Liquid-Solid Circulating Fluidized Bed
- A Hybrid Methodology For On-Line Process Monitoring
- A Laboratory Steam-Cracking Reactor to Characterize Raw Materials
- Modeling, Simulation and Optimal Control of Ethylene Polymerization in Non-Isothermal, High-Pressure Tubular Reactors
- A Parametric Study of the Oxygen Elimination Process in a Packed Bed
- Flow Generated by Radial Flow Impellers: PIV Measurements and CFD Simulations
- Enhanced Reactor Performance with Pressure and Vacuum Swing Reaction
- Characterization and Selection of Materials for Air Biofiltration in Fluidized Beds
- Control and Optimization of a Three Phase Industrial Hydrogenation Reactor
- Horizontal Penetration of Gas-Liquid Spray Jets in Gas-Solid Fluidized Beds
- Optimization of Flow Shear Stress Through a Network of Capillary Fibers With the Use of CFD
- Oxygen Distribution in Packed Bed Membrane Reactors For Partial Oxidation Systems and its Effect On Product Selectivity
- Wastewater Minimisation Using a Heuristic Procedure
- Characterization of Fluidization Quality in Fluidized Beds of Wet Particles
- Numerical and Experimental Investigations into The Effect of Gap Between Baffle and Wall on Mixing in an Oscillatory Baffled Column
- Alternative Designs for Fixed Bed Catalytic Reactors
- Hydrodynamic and Mass Transfer Parameters in Agitated Reactors Part I: Critical Mixing Speed, Induced Gas Flow Rate, and Wavy Surface in SARs and GIRs
- Application of CFD Modelling Technique in Engineering Calculations of Three-Phase Flow Hydrodynamics in a Jet-Loop Reactor
- 3-D Modeling of Liquid Injection into Fluidized Beds
- Conference Presentation
- Granular Flows and Gas Fluidization
- Elastic Granular Flows
- Multi-fluid CFD modelling of fluidised bed reactors
- Chemical Reaction Engineering, the Environment, Pollution Prevention and Sustainable Development
- Gas-Liquid-Solid Fluidization: Perspectives
- Short Communication or Note
- Catalytic Drying of Digested Sludge
- Enhancement of the Distribution of a Liquid Sprayed Into a Fluidized Bed
Articles in the same Issue
- Review
- Industrial Applications of Reactive Distillation: Recent Trends
- Phase Mixing Modeling in Multiphase Reactors Containing Gas Bubble: a Review.
- Article
- Numerical Aspects of Bubble Column Simulations
- Reactor Operating Strategy and Secondary Nucleation in Emulsion Polymerization
- Combined Mechanistic and Empirical Modelling
- The Catalytic Evaluation of Structured Zeolite Catalysts
- A Mechanistic Model for the Water Gas Shift Reaction Over Commercial Catalysts Containing CuO/ZnO
- Catalytic Pyrolysis of Difluorochloromethane to Produce Tetrafluoroethylene
- Radial Profiles of Particle Velocity in a Large Scale CFB Downer
- Nonlinear Dynamic Analysis of the Local Heat Transfer Rate in Three-Phase Reactors
- Conversion of Synthesis Gas into Light Hydrocarbons. Modelling of the Catalytic Reaction Network
- Influence of the Preparation Method and Metal Precursor Compound on Alumina-Supported Pd Catalysts
- A 3D Model of Combustion in Large-Scale Circulating Fluidized Bed Boilers
- Gas and Solid Mixing in High-Density CFB Risers
- A Local Model for Gas-Liquid Mass Transfer in a Gas-Liquid-Solid Circulating Fluidized Bed
- A Hybrid Methodology For On-Line Process Monitoring
- A Laboratory Steam-Cracking Reactor to Characterize Raw Materials
- Modeling, Simulation and Optimal Control of Ethylene Polymerization in Non-Isothermal, High-Pressure Tubular Reactors
- A Parametric Study of the Oxygen Elimination Process in a Packed Bed
- Flow Generated by Radial Flow Impellers: PIV Measurements and CFD Simulations
- Enhanced Reactor Performance with Pressure and Vacuum Swing Reaction
- Characterization and Selection of Materials for Air Biofiltration in Fluidized Beds
- Control and Optimization of a Three Phase Industrial Hydrogenation Reactor
- Horizontal Penetration of Gas-Liquid Spray Jets in Gas-Solid Fluidized Beds
- Optimization of Flow Shear Stress Through a Network of Capillary Fibers With the Use of CFD
- Oxygen Distribution in Packed Bed Membrane Reactors For Partial Oxidation Systems and its Effect On Product Selectivity
- Wastewater Minimisation Using a Heuristic Procedure
- Characterization of Fluidization Quality in Fluidized Beds of Wet Particles
- Numerical and Experimental Investigations into The Effect of Gap Between Baffle and Wall on Mixing in an Oscillatory Baffled Column
- Alternative Designs for Fixed Bed Catalytic Reactors
- Hydrodynamic and Mass Transfer Parameters in Agitated Reactors Part I: Critical Mixing Speed, Induced Gas Flow Rate, and Wavy Surface in SARs and GIRs
- Application of CFD Modelling Technique in Engineering Calculations of Three-Phase Flow Hydrodynamics in a Jet-Loop Reactor
- 3-D Modeling of Liquid Injection into Fluidized Beds
- Conference Presentation
- Granular Flows and Gas Fluidization
- Elastic Granular Flows
- Multi-fluid CFD modelling of fluidised bed reactors
- Chemical Reaction Engineering, the Environment, Pollution Prevention and Sustainable Development
- Gas-Liquid-Solid Fluidization: Perspectives
- Short Communication or Note
- Catalytic Drying of Digested Sludge
- Enhancement of the Distribution of a Liquid Sprayed Into a Fluidized Bed