Home Presidential Address To The Mineralogical Society Of Amrica, Boston, November 6, 2001: Some Precambrian Banded Iron-Formations (BiIFs) From Around The World: Their Age, Geologic Setting, Mineralogy, Metamorphism, Geochemistry, And Origin
Article
Licensed
Unlicensed Requires Authentication

Presidential Address To The Mineralogical Society Of Amrica, Boston, November 6, 2001: Some Precambrian Banded Iron-Formations (BiIFs) From Around The World: Their Age, Geologic Setting, Mineralogy, Metamorphism, Geochemistry, And Origin

  • Cornelis Klein EMAIL logo
Published/Copyright: March 28, 2015
Become an author with De Gruyter Brill

Abstract

Banded iron-formations (BIFs) occur in the Precambrian geologic record over a wide time span. Beginning at 3.8 Ga (Isua, West Greenland), they are part of Archean cratons and range in age from about 3.5 until 2.5 Ga. Their overall volume reaches a maximum at about 2.5 Ga (iron-formations in the Hamersley Basin of Western Australia) and they disappear from the geologic record at about 1.8 Ga, only to reappear between 0.8 and 0.6 Ga.

The stratigraphic sequences in which BIFs occur are highly variable. Most Archean iron-formations are part of greenstone belts that have been deformed, metamorphosed, and dismembered. This makes reconstruction of the basinal setting of such BIFs very difficult. The general lack of metamorphism and deformation of extensive BIFs of the Hamersley Range of Western Australia and the Transvaal Supergroup of South Africa allow for much better evaluations of original basinal settings. Most Archean iron-formations show fine laminations and/or microbanding. Such microbanding is especially well developed in the Brockman Iron Formation of Western Australia, where it has been interpreted as chemical varves, or annual layers of sedimentation. BIFs ranging in age from 2.2 Ga to about 1.8 Ga (e.g., those of the Lake Superior region, U.S.A., Labrador Trough, Canada, and the Nabberu Basin of Western Australia) commonly exhibit granular textures and lack microbanding.

The mineralogy of the least metamorphosed BIFs consists of combinations of the following minerals: chert, magnetite, hematite, carbonates (most commonly siderite and members of the dolomite-ankerite series), greenalite, stilpnomelane, and riebeckite, and locally pyrite. Minnesotaite is a common, very low-grade metamorphic reaction product. The Eh-pH stability fields of the above minerals (and/or their precursors) indicate anoxic conditions for the original depositional environment.

The average bulk chemistry of BIFs, from 3.8 through 1.8 Ga in age, is very similar. They are rich in total Fe (ranging from about 20 to 40 wt%) and SiO2 (ranging from 43 to 56 wt%). CaO and MgO contents range from 1.75 to 9.0 and from 1.20 to 6.7 wt%, respectively. Al2O3 contents are very low, ranging from 0.09 to 1.8 wt%. These chemical values show that they are clean chemical sediments devoid of detrital input. Only the Neoproterozoic iron-formations (of 0.8 to 0.6 Ga in age) have very different mineralogical and chemical make-ups. They consist mainly of chert and hematite, with minor carbonates.

The rare-earth element profiles of almost all BIFs,with generally pronounced positive Eu anomalies, indicate that the source of Fe and Si was the result of deep ocean hydrothermal activity admixed with sea water.

The prograde metamorphism of iron-formations produces sequentially Fe-amphiboles, then Fe-pyroxenes, and finally (at highest grade) Fe-olivine-containing assemblages. Such metamorphic reactions are isochemical except for decarbonation and dehydration.

The common fine lamination (and/or microbanding) as well as the lack of detrital components in most BIFs suggest that such are the result of deposition, below wave base, in the deeper parts of ocean basins. Those with granular textures are regarded as the result of deposition in shallow water, platformal areas. Carbon isotope data suggest that for a long period of time (from Archean to Early Proterozoic) the ocean basins were stratified with respect to δ13C (in carbonates) as well as organic carbon content. In Middle Proterozoic time (when granular BIFs appear) this stratification diminishes and is lost.

The Neoproterozoic BIFs occur in stratigraphic sequences with glaciomarine deposits. These BIFs are the result of anoxic conditions that resulted from the stagnation in the oceans beneath a near-global ice cover, referred to as “Snowball Earth”.

All of the most “primary” mineral assemblages appear to be the result of chemical precipitation under anoxic conditions. There are, as yet, no data to support that BIF precipitation was linked directly to microbial activity. The relative abundance of BIF throughout the Precambrian record is correlated with a possible curve for the evolution of the O2 content in the Precambrian atmosphere.

Received: 2005-3-28
Accepted: 2004-12-3
Published Online: 2015-3-28
Published in Print: 2005-10-1

© 2015 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Presidential Address To The Mineralogical Society Of Amrica, Boston, November 6, 2001: Some Precambrian Banded Iron-Formations (BiIFs) From Around The World: Their Age, Geologic Setting, Mineralogy, Metamorphism, Geochemistry, And Origin
  2. Effects of high pressure and high temperature on cation ordering in magnesioferrite, MgFe2O4, using in situ synchrotron X-ray powder diffraction up to 1430 K and 6 GPa
  3. Raman spectroscopy and vibrational analyses of albite: From 25 °C through the melting temperature
  4. A new occurrence of xitieshanite [Fe3+(SO4)Cl⋅6H2O] crystals in acid-mine seepways, Green Valley, Vigo County, Indiana, U.S.A.
  5. Effect of A-site cation radius on ordering of BX6 octahedra in (K,Na)MgF3 perovskite
  6. Crystal chemistry of NaMgF3 perovskite at high pressure and temperature
  7. Hyperfine electric field gradient tensors at Fe2+ sites in octahedral layers: Toward understanding oriented single-crystal Mössbauer spectroscopy measurements of micas
  8. Does the bazhenovite structure really contain a thiosulfate group? A structural and spectroscopic study of a sample from the type locality
  9. Light-induced degradation dynamics in realgar: in situ structural investigation using single-crystal X-ray diffraction study and X-ray photoelectron spectroscopy
  10. Absolute quantification by powder X-ray diffraction of complex mixtures of crystalline and amorphous phases for applications in the Earth sciences
  11. Detrital illite crystals identified from crystallite thickness measurements in siliciclastic sediments
  12. High-temperature density of lanthanide-bearing Na-silicate melts: Partial molar volumes for Ce2O3, Pr2O3, Nd2O3, Sm2O3, Eu2O3, Gd2O3, Tb2O3, Dy2O3, Ho2O3, Er2O3, Tm2O3, and Yb2O3
  13. Coupled dichotomies of apatite and fluid composition during contact metamorphism of siliceous carbonate rocks
  14. The effect of zoned garnet on metapelite pseudosection topology and calculated metamorphic P-T paths
  15. Low-pressure and low-temperature K-bearing kosmochloric diopside from the Osayama serpentinite mélange, SW Japan
  16. Dehydration of natural stilbite: An in situ FTIR study
  17. Structural changes accompanying the phase transformation between leadhillite and susannite: A structural study by means of in situ high-temperature single-crystal X-ray diffraction
  18. Optic properties of centimeter-sized crystals determined in air with the spindle stage using EXCALIBRW
  19. Zoltaiite, a new barium-vanadium nesosubsilicate mineral from British Columbia: Description and crystal structure
  20. Mn-tourmaline from island of Elba (Italy): Crystal chemistry
  21. Letter: An infrared study of carbon-oxygen bonding in magnesite to 60 GPa
  22. Letter: Metals in quartz-hosted melt inclusions: Natural facts and experimental artifacts
  23. Letter: A high-pressure phase transition of calcite-III
  24. Letter: Experimental observation of an interface-controlled pseudomorphic replacement reaction in a natural crystalline pyrochlore
  25. Letter: A natural scandian garnet
Downloaded on 7.11.2025 from https://www.degruyterbrill.com/document/doi/10.2138/am.2005.1871/html
Scroll to top button