Actual State of Technology in Direct Carbon Fuel Cells
-
Pauline Desclaux
Abstract
At medium term, electricity could be partially provided by the utilization of carbon in high temperature fuel cells. The thermodynamic efficiency of a direct carbon fuel cell (DCFC) slightly exceeds 100% in a wide temperature range due to the positive value of the reaction entropy change. Thus, the thermodynamic efficiency is higher than those of conventional fuel cell types for gaseous fuels.
In DCFC technology, three different main electrolyte concepts are used up to now: two types of liquid salt electrolytes (molten carbonate or molten hydroxide) and a solid oxide electrolyte (solid ceramic layer). For instance, it has been reported that power densities up to 210 mW cm-2 can been achieved at 750 ºC in a molten carbonate based cell, resulting to a real practical efficiency of about 60%. Recently, also combined technologies have been developed in which a maximum power density of 500 mW cm-2 is possible. In this paper, the actual state of technology will be discussed for the different concepts of direct carbon fuel cells.
© by Oldenbourg Wissenschaftsverlag, München, Germany
Artikel in diesem Heft
- Direct Methanol Fuel Cell – Alternative Materials and Catalyst Preparation
- Growth Kinetics of the Anodic Oxide Film on Platinum under Potentiodynamic Polarization Conditions
- High-Throughput Optical Screening of Electrocatalysts for Fuel Cell Applications – Review and Present Developments
- Sulfonated Aromatic Polymers as Proton-Conducting Solid Electrolytes for Fuel Cells: a Short Review
- Electrocatalyst–Membrane Interface and Fuel Cell Performance with Sulfonated PolyEtherEtherKetone as Ionomer
- Actual State of Technology in Direct Carbon Fuel Cells
- Anodic Electrocatalytic Coatings for Electrolytic Chlorine Production: A Review
- Sol-gel Approaches for Elaboration of Polyol Dehydrogenase-Based Bioelectrodes
- Electrochemistry at the Edge of Reason: Chalcogen-Based Redox Systems in Biochemistry and Drug Design
Artikel in diesem Heft
- Direct Methanol Fuel Cell – Alternative Materials and Catalyst Preparation
- Growth Kinetics of the Anodic Oxide Film on Platinum under Potentiodynamic Polarization Conditions
- High-Throughput Optical Screening of Electrocatalysts for Fuel Cell Applications – Review and Present Developments
- Sulfonated Aromatic Polymers as Proton-Conducting Solid Electrolytes for Fuel Cells: a Short Review
- Electrocatalyst–Membrane Interface and Fuel Cell Performance with Sulfonated PolyEtherEtherKetone as Ionomer
- Actual State of Technology in Direct Carbon Fuel Cells
- Anodic Electrocatalytic Coatings for Electrolytic Chlorine Production: A Review
- Sol-gel Approaches for Elaboration of Polyol Dehydrogenase-Based Bioelectrodes
- Electrochemistry at the Edge of Reason: Chalcogen-Based Redox Systems in Biochemistry and Drug Design
