Skip to main content
Article Publicly Available

Frontmatter

Published/Copyright: September 1, 2015
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Science and Engineering of Composite Materials
From the journal Science and Engineering of Composite Materials Volume 22 Issue 5

Published Online: 2015-9-1
Published in Print: 2015-9-1

©2015 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  2. Original articles
  3. The adsorption kinetics and thermodynamics of cationic surfactants on graphite oxide
  4. An energy-based equivalent inclusion for the determination of nanocomposite behavior
  5. Fabrication of aluminum wires treated with nanocomposite pellets
  6. Morphology and ferroelectric properties of Ce-substituted Bi4 Ti3 O12 thin films prepared by sol-gel method
  7. Effect of additive Al2 O3 powders on micro-arc oxide coating of magnesium alloy
  8. The flexural behaviors of the impacted composite single-lap adhesive joints
  9. Investigations on interface microstructure and strength properties of dissimilar tin bronze/superalloy diffusion bonded joints
  10. Damage behavior of potting materials in sandwich composites with pinned joints
  11. Low velocity impact behaviour of glass fabric/epoxy honeycomb core sandwich composites
  12. Properties of PVA-reinforced cement-bonded fiberboards processed with calender extrusion
  13. Preparation of optimal feedstock for low-pressure injection molding of Al/SiC nanocomposite
  14. The effects of open holes on the fracture behaviors and mechanical properties of glass fiber mat composites
  15. The effect of hybridization and boundary conditions on damping and free vibration of composite plates
  16. Effect of the amount of SiC, number of strokes, and applied load on the reciprocating wear behavior of Al-SiC composites
  17. Stabilization of clayey subgrade with waste pumice for road infrastructure
https://doi.org/10.1515/secm-2015-frontmatter5

Articles in the same Issue

  1. Frontmatter
  2. Original articles
  3. The adsorption kinetics and thermodynamics of cationic surfactants on graphite oxide
  4. An energy-based equivalent inclusion for the determination of nanocomposite behavior
  5. Fabrication of aluminum wires treated with nanocomposite pellets
  6. Morphology and ferroelectric properties of Ce-substituted Bi4 Ti3 O12 thin films prepared by sol-gel method
  7. Effect of additive Al2 O3 powders on micro-arc oxide coating of magnesium alloy
  8. The flexural behaviors of the impacted composite single-lap adhesive joints
  9. Investigations on interface microstructure and strength properties of dissimilar tin bronze/superalloy diffusion bonded joints
  10. Damage behavior of potting materials in sandwich composites with pinned joints
  11. Low velocity impact behaviour of glass fabric/epoxy honeycomb core sandwich composites
  12. Properties of PVA-reinforced cement-bonded fiberboards processed with calender extrusion
  13. Preparation of optimal feedstock for low-pressure injection molding of Al/SiC nanocomposite
  14. The effects of open holes on the fracture behaviors and mechanical properties of glass fiber mat composites
  15. The effect of hybridization and boundary conditions on damping and free vibration of composite plates
  16. Effect of the amount of SiC, number of strokes, and applied load on the reciprocating wear behavior of Al-SiC composites
  17. Stabilization of clayey subgrade with waste pumice for road infrastructure
Downloaded on 22.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/secm-2015-frontmatter5/html
Scroll to top button