Startseite The intrinsic dielectric properties of Mediterranean bio-composites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The intrinsic dielectric properties of Mediterranean bio-composites

  • Faris M. AL-Oqla ORCID logo EMAIL logo und Nashat Nawafleh ORCID logo
Veröffentlicht/Copyright: 25. November 2024
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Physical Sciences Reviews
Aus der Zeitschrift Physical Sciences Reviews Band 9 Heft 12

Abstract

The environment is seriously threatened by the growing use and disposal of technological products since most of them include non-biodegradable components. One approach to reduce environmental impact of electronic devices is to use biodegradable electronic components derived from natural fibers like protein and cellulose. Actually, a lot of research has been done on the viability of producing electronic components out of materials obtained from natural fibers. Their inclusion of several changeable functional categories is another benefit. Dielectric materials are one of the several necessary and commonplace parts of technical devices. A thorough study on the varieties of natural fibers used to make dielectric materials and their electrical properties would be beneficial in selecting the appropriate fibers and conditions for certain applications. To make full use of new natural composite materials in growing sectors, their electric properties have to be examined. However, along with polypropylene, four different kinds of natural lignocellulosic fibers will be discussed in this work: black pepper, sumac, pomegranate, and lemon – as case studies. In specific, over a frequency range of 1 KHz to 4 MH, the AC conductivity and dielectric constant of the produced samples were measured using the method of parallel plate capacitors. After that, given the performance of sisal fibers, a comparison between them and a sisal natural fiber (a non-Mediterranean variety) will be made.

Keywords: dielectric materials; bio composites; electrical characteristics; sustainability
Corresponding author: Faris M. AL-Oqla, Department of Mechanical Engineering, Faculty of Engineering, The Hashemite University, P.O Box 330127, Zarqa 13133, Jordan, E-mail:

Acknowledgments

The authors would like to thank the editors for their guidance and review of this article before its publication.

  1. Research ethics: Not applicable.

  2. Informed consent: Not applicable.

  3. Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission.

  4. Use of Large Language Models, AI and Machine Learning Tools: None declared.

  5. Conflict of interest: The authors state no conflict of interest.

  6. Research funding: None declared.

  7. Data availability: Not applicable.

References

1. Fares, OO, AL-Oqla, FM. Modern electrical applications of biopolymers. In: Advanced processing, properties, and applications of starch and other bio-based polymers. Cambridge: Elsevier; 2020:173–84 pp.10.1016/B978-0-12-819661-8.00011-1Suche in Google Scholar

2. Chen, J, Qiu, Q, Han, Y, Lau, D. Piezoelectric materials for sustainable building structures: fundamentals and applications. Renew Sustain Energy Rev 2019;101:14–25. https://doi.org/10.1016/j.rser.2018.09.038.Suche in Google Scholar

3. AL-Oqla, FM, Sapuan, S, Fares, O. Electrical–based applications of natural fiber vinyl polymer composites. In: Natural fibre reinforced vinyl ester and vinyl polymer composites. Cambridge: Elsevier; 2018:349–67 pp.10.1016/B978-0-08-102160-6.00018-4Suche in Google Scholar

4. George, G, Joseph, K, Nagarajan, E, Tomlal Jose, E, George, K. Dielectric behaviour of PP/jute yarn commingled composites: effect of fibre content, chemical treatments, temperature and moisture. Compos Appl Sci Manuf 2013;47:12–21. https://doi.org/10.1016/j.compositesa.2012.11.009.Suche in Google Scholar

5. Al-Oqla, FM. Flexural characteristics and impact rupture stress investigations of sustainable green olive leaves bio-composite materials. J Polym Environ 2021;29:892–9. https://doi.org/10.1007/s10924-020-01889-3.Suche in Google Scholar

6. AL-Oqla, FM, Thakur, VK. Toward chemically treated low-cost lignocellulosic parsley waste/polypropylene bio-composites for resourceful sustainable bio-products. Int J Environ Sci Technol 2021;1–10. https://doi.org/10.1007/s13762-021-03601-x.Suche in Google Scholar

7. Omran, AAB, Mohammed, AABA, Sapuan, SM, Ilyas, RA, Asyraf, MRM, Rahimian Koloor, SS, et al.. Micro-and nanocellulose in polymer composite materials: a review. Polymers 2021;13:231. https://doi.org/10.3390/polym13020231.Suche in Google Scholar PubMed PubMed Central

8. Ilyas, R, Sapuan, S, Harussani, M, Hakimi, M, Haziq, M, Atikah, M, et al.. Polylactic acid (PLA) biocomposite: processing, additive manufacturing and advanced applications. Polymers 2021;13:1326. https://doi.org/10.3390/polym13081326.Suche in Google Scholar PubMed PubMed Central

9. Hyland, M, Hunter, H, Liu, J, Veety, E, Vashaee, D. Wearable thermoelectric generators for human body heat harvesting. Appl Energy 2016;182:518–24. https://doi.org/10.1016/j.apenergy.2016.08.150.Suche in Google Scholar

10. AL-Oqla, FM, Sapuan, S. Advanced processing, properties, and applications of starch and other bio-based polymers. Cambridge, USA: Elsevier; 2020.Suche in Google Scholar

11. AL‐Oqla, FM. Introduction to biobased composites. Biobased Compos Process Char Prop Appl 2021:1–14. https://doi.org/10.1002/9781119641803.ch1.Suche in Google Scholar

12. Fares, O, AL-Oqla, FM, Hayajneh, MT. Dielectric relaxation of mediterranean lignocellulosic fibers for sustainable functional biomaterials. Mater Chem Phys 2019;229:174–82. https://doi.org/10.1016/j.matchemphys.2019.02.095.Suche in Google Scholar

13. Ismail, A, AL-Oqla, FM, Risby, M, Sapuan, S. On the enhancement of the fatigue fracture performance of polymer matrix composites by reinforcement with carbon nanotubes: a systematic review. Carbon Lett 2022:1–14. https://doi.org/10.1007/s42823-022-00323-z.Suche in Google Scholar

14. Hayajneh, MT, AL-Oqla, FM, Mu’ayyad, M. Hybrid green organic/inorganic filler polypropylene composites: morphological study and mechanical performance investigations. E-Polymers 2021;21:710–21. https://doi.org/10.1515/epoly-2021-0074.Suche in Google Scholar

15. Hayajneh, M, AL-Oqla, FM, Aldhirat, A. Physical and mechanical inherent characteristic investigations of various Jordanian natural fiber species to reveal their potential for green biomaterials. J Nat Fibers 2021:1–14. https://doi.org/10.1080/15440478.2021.1944432.Suche in Google Scholar

16. AL‐Oqla, FM, Hayajneh, MT, Aldhirat, A. Tribological and mechanical fracture performance of Mediterranean lignocellulosic fiber reinforced polypropylene composites. Polym Compos 2021. https://doi.org/10.1002/pc.26241.Suche in Google Scholar

17. AL-Oqla, FM, Al-Jarrah, R. A novel adaptive neuro-fuzzy inference system model to predict the intrinsic mechanical properties of various cellulosic fibers for better green composites. Cellulose 2021:1–12. https://doi.org/10.1007/s10570-021-04077-1.Suche in Google Scholar

18. Al-Oqla, FM. Performance trends and deteriorations of lignocellulosic grape fiber/polyethylene biocomposites under harsh environment for enhanced sustainable bio-materials. Cellulose 2021;28:2203–13. https://doi.org/10.1007/s10570-020-03649-x.Suche in Google Scholar

19. Al-Ghraibah, AM, Al-Qudah, M, AL-Oqla, FM. Medical implementations of biopolymers. In: Advanced processing, properties, and applications of starch and other bio-based polymers. Cambridge: Elsevier; 2020:157–71 pp.10.1016/B978-0-12-819661-8.00010-XSuche in Google Scholar

20. Alaaeddin, M, Sapuan, S, Zuhri, M, Zainudin, E, AL-Oqla, FM. Development of photovoltaic module with fabricated and evaluated novel backsheet-based biocomposite materials. Materials 2019;12:3007. https://doi.org/10.3390/ma12183007.Suche in Google Scholar PubMed PubMed Central

21. Elimat, Z, Hussain, W, Zihlif, A. PAN-based carbon fibers/PMMA composites: thermal, dielectric, and DC electrical properties. J Mater Sci Mater Electron 2012;23:2117–22. https://doi.org/10.1007/s10854-012-0712-y.Suche in Google Scholar

22. Tanaka, T, Montanari, G, Mulhaupt, R. Polymer nanocomposites as dielectrics and electrical insulation-perspectives for processing technologies, material characterization and future applications. IEEE Trans Dielectr Electr Insul 2004;11:763–84. https://doi.org/10.1109/tdei.2004.1349782.Suche in Google Scholar

23. Hughes, MP, Rosenthal, KD, Ran, NA, Seifrid, M, Bazan, GC, Nguyen, TQ. Determining the dielectric constants of organic photovoltaic materials using impedance spectroscopy. Adv Funct Mater 2018;28:1801542. https://doi.org/10.1002/adfm.201801542.Suche in Google Scholar

24. Nalwa, HS. Handbook of low and high dielectric constant materials and their applications, two-volume set. Cambridge: Elsevier; 1999.Suche in Google Scholar

25. Sharma, H, Jain, S, Raj, PM, Murali, K, Tummala, R. Magnetic and dielectric property studies in Fe-and NiFe-based polymer nanocomposites. J Electron Mater 2015;44:3819–26. https://doi.org/10.1007/s11664-015-3801-x.Suche in Google Scholar

26. Bhuvaneswari, H, Vinayaka, D, Ilangovan, M, Reddy, N. Completely biodegradable banana fiber-wheat gluten composites for dielectric applications. J Mater Sci Mater Electron 2017;28:12383–90. https://doi.org/10.1007/s10854-017-7058-4.Suche in Google Scholar

27. Jayamani, E, Hamdan, S, Rahman, MR, Bakri, MKB. Comparative study of dielectric properties of hybrid natural fiber composites. Procedia Eng 2014;97:536–44. https://doi.org/10.1016/j.proeng.2014.12.280.Suche in Google Scholar

28. Kumar, V, Kumar, R. Dielectric and mechanical properties of alkali-and silane-treated bamboo-epoxy nanocomposites. J Compos Mater 2012;46:3089–101. https://doi.org/10.1177/0021998311435831.Suche in Google Scholar

29. Fraga, A, Frullloni, E, De la Osa, O, Kenny, J, Vázquez, A. Relationship between water absorption and dielectric behaviour of natural fibre composite materials. Polym Test 2006;25:181–7. https://doi.org/10.1016/j.polymertesting.2005.11.002.Suche in Google Scholar

30. Bhuvaneswari, H, Reddy, N. A review on dielectric properties of biofiber-based composites. Adv Compos Hybrid Mater 2018;1:635–48. https://doi.org/10.1007/s42114-018-0053-2.Suche in Google Scholar

31. AL-Oqla, FM, Hayajneh, MT, Fares, O. Investigating the mechanical thermal and polymer interfacial characteristics of Jordanian lignocellulosic fibers to demonstrate their capabilities for sustainable green materials. J Clean Prod 2019;241:118256. https://doi.org/10.1016/j.jclepro.2019.118256.Suche in Google Scholar

32. Alaaeddin, M, Sapuan, S, Zuhri, M, Zainudin, E, AL-Oqla, FM. Physical and mechanical properties of polyvinylidene fluoride-Short sugar palm fiber nanocomposites. J Clean Prod 2019;235:473–82. https://doi.org/10.1016/j.jclepro.2019.06.341.Suche in Google Scholar

33. AL-Oqla, FM, Alaaeddin, M, El-Shekeil, Y. Thermal stability and performance trends of sustainable lignocellulosic olive/low density polyethylene biocomposites for better environmental green materials. Eng Solid Mech 2021;9:439–48. https://doi.org/10.5267/j.esm.2021.5.002.Suche in Google Scholar

34. Ilyas, R, Sapuan, S, Norrrahim, MNF, Yasim-Anuar, TAT, Kadier, A, Kalil, MS, et al.. Nanocellulose/starch biopolymer nanocomposites: processing, manufacturing, and applications. In: Advanced processing, properties, and applications of starch and other bio-based polymers. Cambridge: Elsevier; 2020:65–88 pp.10.1016/B978-0-12-819661-8.00006-8Suche in Google Scholar

35. Alaaeddin, M, Sapuan, S, Zuhri, M, Zainudin, E, AL-Oqla, FM. Lightweight and durable PVDF–SSPF composites for photovoltaics backsheet applications: thermal, optical and technical properties. Materials 2019;12:2104. https://doi.org/10.3390/ma12132104.Suche in Google Scholar PubMed PubMed Central

36. Alaaeddin, M, Sapuan, S, Zuhri, M, Zainudin, E, AL-Oqla, FM. Polymer matrix materials selection for short sugar palm composites using integrated multi criteria evaluation method. Compos Eng 2019:107342. https://doi.org/10.1016/j.compositesb.2019.107342.Suche in Google Scholar

37. AL-Oqla, FM, Salit, MS. Materials selection for natural fiber composites. Cambridge, USA: Woodhead Publishing, Elsevier; 2017: 286 p.10.1016/B978-0-08-100958-1.00002-5Suche in Google Scholar

38. AL-Oqla, FM. Investigating the mechanical performance deterioration of Mediterranean cellulosic cypress and pine/polyethylene composites. Cellulose 2017;24:2523–30. https://doi.org/10.1007/s10570-017-1280-3.Suche in Google Scholar

39. AL-Oqla, FM. Expert system optimizing model of filament winding process for improved automated composite manufacturing structure. J Ind Eng Int 2021;17:34–46.Suche in Google Scholar

40. AL-Oqla, FM. Effects of intrinsic mechanical characteristics of lignocellulosic fibres on the energy absorption and impact rupture stress of low density polyethylene biocomposites. Int J Sustain Eng 2021:1–9. https://doi.org/10.1080/19397038.2021.1966127.Suche in Google Scholar

41. Mi, H-Y, Li, Z, Turng, L-S, Sun, Y, Gong, S. Silver nanowire/thermoplastic polyurethane elastomer nanocomposites: thermal, mechanical, and dielectric properties. Mater Des 2014;56:398–404. https://doi.org/10.1016/j.matdes.2013.11.029.Suche in Google Scholar

42. Nawaz, A, Liu, Q, Leong, WL, Fairfull‐Smith, KE, Sonar, P. Organic electrochemical transistors for in vivo bioelectronics. Adv Mater 2021;33:2101874. https://doi.org/10.1002/adma.202101874.Suche in Google Scholar PubMed

43. Beluns, S, Gaidukovs, S, Platnieks, O, Gaidukova, G, Mierina, I, Grase, L, et al.. From wood and hemp biomass wastes to sustainable nanocellulose foams. Ind Crop Prod 2021;170:113780. https://doi.org/10.1016/j.indcrop.2021.113780.Suche in Google Scholar

44. Platnieks, O, Barkane, A, Ijudina, N, Gaidukova, G, Thakur, VK, Gaidukovs, S. Sustainable tetra pak recycled cellulose/Poly (Butylene succinate) based woody-like composites for a circular economy. J Clean Prod 2020:122321. https://doi.org/10.1016/j.jclepro.2020.122321.Suche in Google Scholar

45. Abral, H, Basri, A, Muhammad, F, Fernando, Y, Hafizulhaq, F, Mahardika, M, et al.. A simple method for improving the properties of the sago starch films prepared by using ultrasonication treatment. Food Hydrocolloids 2019;93:276–83. https://doi.org/10.1016/j.foodhyd.2019.02.012.Suche in Google Scholar

46. AL-Oqla, FM, Sapuan, S. Investigating the inherent characteristic/performance deterioration interactions of natural fibers in bio-composites for better utilization of resources. J Polym Environ 2018;26:1290–6. https://doi.org/10.1007/s10924-017-1028-z.Suche in Google Scholar

47. AL-Oqla, FM, Sapuan, S, Jawaid, M. Integrated mechanical-economic–environmental quality of performance for natural fibers for polymeric-based composite materials. J Nat Fibers 2016;13:651–9.Suche in Google Scholar

48. Zhan, M, Wool, RP, Xiao, JQ. Electrical properties of chicken feather fiber reinforced epoxy composites. Compos Appl Sci Manuf 2011;42:229–33. https://doi.org/10.1016/j.compositesa.2010.11.007.Suche in Google Scholar

49. Lai, C, Sapuan, S, Ahmad, M, Yahya, N, Dahlan, K. Mechanical and electrical properties of coconut coir fiber-reinforced polypropylene composites. Polym-Plast Technol Eng 2005;44:619–32. https://doi.org/10.1081/pte-200057787.Suche in Google Scholar

50. Dalai, S, Parida, C. Interpretation of Cole–Cole dielectric dispersion of green composites from medical LINAC modified luffa fiber/PLA. J Mater Sci Mater Electron 2022:1–15. https://doi.org/10.1007/s10854-022-07871-0.Suche in Google Scholar

51. Salema, AA, Yeow, YK, Ishaque, K, Ani, FN, Afzal, MT, Hassan, A. Dielectric properties and microwave heating of oil palm biomass and biochar. Ind Crop Prod 2013;50:366–74. https://doi.org/10.1016/j.indcrop.2013.08.007.Suche in Google Scholar

52. Zhang, S, Li, Y, Zheng, Z. Effect of physiochemical structure on energy absorption properties of plant fibers reinforced composites: dielectric, thermal insulation, and sound absorption properties. Compos Commun 2018;10:163–7. https://doi.org/10.1016/j.coco.2018.09.006.Suche in Google Scholar

53. Deshmukh, K, Ahamed, MB, Deshmukh, R, Pasha, SK, Bhagat, P, Chidambaram, K. Biopolymer composites with high dielectric performance: interface engineering. In: Biopolymer composites in electronics. Amsterdam: Elsevier; 2017:27–128 pp.10.1016/B978-0-12-809261-3.00003-6Suche in Google Scholar

54. Bharath, K, Puttegowda, M, Yashas Gowda, TG, Arpitha, GR, Pradeep, S, Rangappa, SM, et al.. Development of banana fabric incorporated polymer composites for printed circuit board application. Biomass Convers Biorefinery 2024;14:12599–612. https://doi.org/10.1007/s13399-023-04249-y.Suche in Google Scholar

55. Shinoj, S, Visvanathan, R, Panigrahi, S. Towards industrial utilization of oil palm fibre: physical and dielectric characterization of linear low density polyethylene composites and comparison with other fibre sources. Biosyst Eng 2010;106:378–88. https://doi.org/10.1016/j.biosystemseng.2010.04.008.Suche in Google Scholar

56. Balanis, CA. Advanced engineering electromagnetics. Hoboken, NJ: John Wiley & Sons; 2012.Suche in Google Scholar

57. Jia, W, Tchoudakov, R, Segal, E, Joseph, R, Narkis, M, Siegmann, A. Electrically conductive composites based on epoxy resin with polyaniline-DBSA fillers. Synth Met 2003;132:269–78. https://doi.org/10.1016/s0379-6779(02)00460-5.Suche in Google Scholar

58. Baker-Jarvis, J, Janezic, MD, DeGroot, DC. High-frequency dielectric measurements. IEEE Instrum Meas Mag 2010;13:24–31. https://doi.org/10.1109/mim.2010.5438334.Suche in Google Scholar

59. Nelson, SO. Fundamentals of dielectric properties measurements and agricultural applications. J Microw Power Electromagn Energy 2010;44:98–113. https://doi.org/10.1080/08327823.2010.11689778.Suche in Google Scholar PubMed

60. Bledzki, AK, Lucka, M, Al Mamun, A, Michalski, J. Biological and electrical resistance of acetylated flax fibre reinforced polypropylene composites. Bioresources 2009;4:111–25. https://doi.org/10.15376/biores.4.1.111-125.Suche in Google Scholar

61. John, MJ, Tlili, R, Anandjiwala, RD, Boudenne, A, Ibos, L. Effect of amphiphilic coupling agent on heat flow and dielectric properties of flax–polypropylene composites. Compos B Eng 2012;43:526–32. https://doi.org/10.1016/j.compositesb.2011.11.016.Suche in Google Scholar

62. John, MJ, Bellmann, C, Anandjiwala, RD. Kenaf–polypropylene composites: effect of amphiphilic coupling agent on surface properties of fibres and composites. Carbohydr Polym 2010;82:549–54. https://doi.org/10.1016/j.carbpol.2010.05.015.Suche in Google Scholar

63. Fares, O, AL-Oqla, FM, Hayajneh, M. Revealing the intrinsic dielectric properties of mediterranean green fiber composites for sustainable functional products. J Ind Textil 2022;51:7732S–7754S. https://doi.org/10.1177/15280837221094648.Suche in Google Scholar

64. Chen, Y-C, Lin, H-C, Lee, Y-D. The effects of filler content and size on the properties of PTFE/SiO2 composites. J Polym Res 2003;10:247–58. https://doi.org/10.1023/b:jpol.0000004620.71900.16.10.1023/B:JPOL.0000004620.71900.16Suche in Google Scholar

65. Pathania, D, Singh, D. A review on electrical properties of fiber reinforced polymer composites. Theor Appl Sci 2009;1:34–7.Suche in Google Scholar

66. Sreekumar, P, Saiter, JM, Joseph, K, Unnikrishnan, G, Thomas, S. Electrical properties of short sisal fiber reinforced polyester composites fabricated by resin transfer molding. Compos Appl Sci Manuf 2012;43:507–11. https://doi.org/10.1016/j.compositesa.2011.11.018.Suche in Google Scholar

67. Sharma, J, Chand, N. Role of cenosphere addition on dielectric properties of sisal fiber-polypropylene composites. Polym-Plast Technol Eng 2013;52:743–53. https://doi.org/10.1080/03602559.2012.755545.Suche in Google Scholar

68. Haseena, A, Unnikrishnan, G, Kalaprasad, G. Dielectric properties of short sisal/coir hybrid fibre reinforced natural rubber composites. Compos Interfac 2007;14:763–86. https://doi.org/10.1163/156855407782106582.Suche in Google Scholar

69. Widjajakusuma, J, Biswal, B, Hilfer, R. Quantitative comparison of mean field mixing laws for conductivity and dielectric constants of porous media. Phys Stat Mech Appl 2003;318:319–33. https://doi.org/10.1016/s0378-4371(02)01197-4.Suche in Google Scholar
Received: 2024-08-04
Accepted: 2024-10-08
Published Online: 2024-11-25

© 2024 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Reviews
  3. A facile and efficient one-pot 3-component reaction (3-CR) method for the synthesis of thiazine-based heterocyclic compounds using zwitterion adduct intermediates
  4. Preparing new secondary science teachers in the context of sustainable development goals: green and sustainable chemistry
  5. Green carbon-based adsorbents for water treatment in Sub-Saharan Africa
  6. A review of electrical and piezoelectric properties of nanocellulose biocomposites
  7. Applications of bio-composites in electronics
  8. Dielectric characteristics of Mediterranean lignocellulosic fibers for functional biocomposite materials
  9. A review of graphene biopolymer composite in piezoelectric sensor applications
  10. The intrinsic dielectric properties of Mediterranean bio-composites
https://doi.org/10.1515/psr-2024-0079
Schlagwörter für diesen Artikel
dielectric materials; bio composites; electrical characteristics; sustainability

Artikel in diesem Heft

  1. Frontmatter
  2. Reviews
  3. A facile and efficient one-pot 3-component reaction (3-CR) method for the synthesis of thiazine-based heterocyclic compounds using zwitterion adduct intermediates
  4. Preparing new secondary science teachers in the context of sustainable development goals: green and sustainable chemistry
  5. Green carbon-based adsorbents for water treatment in Sub-Saharan Africa
  6. A review of electrical and piezoelectric properties of nanocellulose biocomposites
  7. Applications of bio-composites in electronics
  8. Dielectric characteristics of Mediterranean lignocellulosic fibers for functional biocomposite materials
  9. A review of graphene biopolymer composite in piezoelectric sensor applications
  10. The intrinsic dielectric properties of Mediterranean bio-composites
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 23.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/psr-2024-0079/html?lang=de
Button zum nach oben scrollen