Inorganic luminescent pigments
-
Gerhard Pfaff
Abstract
Inorganic luminescent pigments (luminescent materials, luminophores, phosphors) as synthetically generated crystalline compositions absorb energy followed by emission of light with lower energy, respectively, longer wavelengths. The light emission occurs often in the visible spectral range. External energy is necessary to enable luminescent materials to generate light. Luminescent pigments are divided into fluorescent and phosphorescent pigments. This classification goes back to different energy transitions. Emission based on allowed optical transitions, with decay times in the order of µs or faster is defined as fluorescence. Emission with longer decay times is called phosphorescence. The occurrence of fluorescence or phosphorescence as well as the decay time depend on structure and composition of a specific luminophore. There are four luminescence mechanisms discussed for inorganic luminescent materials: center luminescence, charge-transfer luminescence, donor–acceptor pair luminescence, and long-afterglow phosphorescence. The emission of luminescent light can have its origin in different excitation mechanisms such as optical excitation (UV radiation or even visible light), high-voltage or low-voltage electroluminescence and excitation with high energy particles (X-rays, γ-rays). Inorganic luminescent pigments are used mainly in fluorescent lamps, cathode-ray tubes, projection television tubes, plasma display panels, light-emitting diodes (LEDs) and for X-ray and γ-ray detection. The pigment particles are dispersed for the applications in specific binder systems. They are applied in form of thin layers and by means of luminophore/solvent suspensions, containing adhesive agents, on a substrate.
References
1. Ronda C. In industrial inorganic pigments. Buxbaum G, Pfaff G, editors. 3rd ed. Weinheim: Wiley-VCH Verlag, 2005:269.Suche in Google Scholar
2. Pfaff G. In Winnacker-Küchler: Chemische Technik, Vol. 7 Industrieprodukte. Dittmeyer R, Keim W, Kreysa G, Oberholz A, editors. 5th ed. Weinheim: Wiley-VCH, 2004:373.Suche in Google Scholar
3. Feldmann C, Jüstel T, Ronda CR, Schmidt P. Inorganic luminescent materials: 100 years of research and application. J Adv Funct Mat. 2003;13:511.10.1002/adfm.200301005Suche in Google Scholar
4. Kalyani NT, Dhoble SJ. Organic light emitting diodes: energy saving lighting technology – a review. Renew Sust Energ Rev. 2012;16:2696.10.1016/j.rser.2012.02.021Suche in Google Scholar
5. Robbins DJ. On predicting the maximum efficiency of phosphor systems excited by ionizing radiation. J Electrochem Soc. 1980;127:2694.10.1149/1.2129574Suche in Google Scholar
6. Pfaff G. Inorganic pigments. Berlin/Boston: Walter de Gruyter GmbH, 2017:274.10.1515/9783110484519-010Suche in Google Scholar
7. Kotera Y, Higashi T, Sugai M, Ueno A. The effect of La substitution in Eu3+-activated Y2O3 phosphors on their luminescent property. J Lumin. 1984;31:709.10.1016/0022-2313(84)90103-0Suche in Google Scholar
8. Patent US. 3,418,246 (M. R. Royce). 1968.Suche in Google Scholar
9. Uheda K, Takizawa H, Endo T, Yamane H, Shimada M, Wang C-M, Mitomo M. Synthesis and luminescent property of Eu3+-doped LaSi3N5 phosphor. J Lumin. 2000;87–89:967.10.1016/S0022-2313(99)00494-9Suche in Google Scholar
10. Auzel F. Advances in nonradiative processes in solids. NATO ASI Series 1991;249:135.10.1007/978-1-4757-4446-0_4Suche in Google Scholar
11. McKittrick J, Shea-Rohwer LE. Review: down conversion materials for solid-state lighting. J Am Ceram Soc. 2014;97:1327.10.1111/jace.12943Suche in Google Scholar
12. Sommerdijk JL, Bril A, de Jager AW. Two photon luminescence with ultraviolet excitation of trivalent praseodymium. J Lumin. 1974;8:341.10.1016/0022-2313(74)90006-4Suche in Google Scholar
13. Piper WW, de Luca JA, Ham FD. Cascade fluorescent decay in Pr3+-doped fluorides: achievement of a quantum yield greater than unity for emission of visible light. J Lumin. 1974;8:344.10.1016/0022-2313(74)90007-6Suche in Google Scholar
14. Colvin VL, Schlamp MC, Alivisatos AP. Light-emitting diodes made from cadmium selenide nanocrystals and a semiconducting polymer. Nature. 1994;370:354.10.1038/370354a0Suche in Google Scholar
15. Empedocles SA, Neuhauser R, Shimizu K, Bawendi MG. Photoluminescence from single semiconductor nanostructures. Adv Mater. 1999;11:1243.10.1002/(SICI)1521-4095(199910)11:15<1243::AID-ADMA1243>3.0.CO;2-2Suche in Google Scholar
16. Talapin DV, Rogach AL, Kornowski A, Haase M, Weller H. High luminescent monodisperse CdSe and CdSe/ZnS nanocrystals synthesized in a hexadecylamine-trioctylphosphine oxide-trioctylphosphine mixture. Nano Lett. 2001;4:207.10.1021/nl0155126Suche in Google Scholar
17. Bera D, Qian L, Tseng T-K, Holloway PH. Quantum dots and their multimodal applications: a review. Materials. 2010;3:2260.10.3390/ma3042260Suche in Google Scholar
18. Shipway AN, Katz E, Willner I. Nanoparticle arrays on surfaces for electronic, optical, and sensor applications. Chem Phys Chem. 2000;1:19.10.1002/1439-7641(20000804)1:1<18::AID-CPHC18>3.0.CO;2-LSuche in Google Scholar
19. Dujardin E, Mann S. Bio-inspired materials chemistry. Adv Mater. 2002;14:775.10.1002/1521-4095(20020605)14:11<775::AID-ADMA775>3.0.CO;2-0Suche in Google Scholar
20. Andres J, Hersch RD, Moser JE, Chauvin AS. A new anti-counterfeiting feature relying on invisible luminescent full color images printed with lanthanide-based inks. Adv Funct Mater. 2014;24:5029.10.1002/adfm.201400298Suche in Google Scholar
21. Kumar P, Singh S, Gupta BK. Future prospects of luminescent nanomaterial based security inks: from synthesis to anti-counterfeiting applications. Nanoscale. 2016;8:14297.10.1039/C5NR06965CSuche in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston
