Encapsulation of anion-cation organo-montmorillonite in terpolymer microsphere: structure, morphology, and properties
-
Yuan Lin
,
Chengcheng Yu
Abstract
Exfoliated organo-montmorillonite (O-Mt) layers were successfully encapsulated in a terpolymer microsphere (PAAA) of acrylamide (AM)/acrylic acid (AA)/2-acrylamido-2-methylpropanesulfonic acid (AMPS) via in situ inverse suspension polymerization, with the aid of the organic modification by cetyltrimethylammonium bromide (CTAB) and sodium lauryl sulfonate (SLS). The chemical structure and properties of the Mt were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA), which showed that SLS molecules successfully intercalated Mt interlayers and enhanced the thermostability of Mt. The microsphere morphologies of the polymer and its nanocomposites were detected by scanning electron microscopy (SEM). The results of X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed that the exfoliated O-Mt dispersed in the polymer matrix. The introduction of well-dispersed O-Mt layers significantly enhanced the comprehensive performance of these microspheres, including thermostability and plugging properties. The Tmax of PAAA/1.5 wt.% O-Mt nanocomposite is increased by 46°C compared to the pure terpolymer. The plugging rate of PAAA/2.0 wt.% O-Mt reached up to 85.8%. Therefore, these selected nanocomposite microspheres can provide an effective plugging in the high-permeability layers.
Funding source: National Natural Science Foundation of China
Award Identifier / Grant number: 51974339
Award Identifier / Grant number: 51674270
Funding statement: This work was financially supported by the National Natural Science Foundation of China (grant nos. 51974339; 51674270, Funder Id: http://dx.doi.org/10.13039/501100001809), National Major Project (grant no. 2017ZX05009-003), Major Project of the National Natural Science Foundation of China (no. 51490650), and the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (grant nos. 51821092; 51521063)
References
[1] Sang Q, Li Y J, Yu L, Li ZQ, Dong MZ. Fuel 2014, 136, 295–306.10.1016/j.fuel.2014.07.065Suche in Google Scholar
[2] Yao C, Lei G, Hou J, Xu XH, Wang D, Steenhuis TS. Ind. Eng. Chem. Res. 2015, 54, 10925–10934.10.1021/acs.iecr.5b02717Suche in Google Scholar
[3] Zhao S, Pu WF, Wei B, Xu XG. Fuel 2019, 235, 249–258.10.1016/j.fuel.2018.07.125Suche in Google Scholar
[4] Lin M, Zhang G, Hua Z, Zhao Q, Sun F. Colloid Surface A 2015, 477, 49–54.10.1016/j.colsurfa.2015.03.042Suche in Google Scholar
[5] Li JB, Niu LW, Lu XG. Energy Sci. Eng. 2019, 7, 2026–2045.10.1002/ese3.409Suche in Google Scholar
[6] Ji J Q, Zeng C L, Ke Y C, Pei Y. J. Appl. Polym. Sci. 2017, 134, 45502.10.1002/app.45502Suche in Google Scholar
[7] Fisher H. Mater. Sci. Eng. C 2003, 23, 763–772.10.1016/j.msec.2003.09.148Suche in Google Scholar
[8] Alexandre M, Dubois P. Mat. Sci. Eng. R 2000, 28, 1–63.10.1016/S0927-796X(00)00012-7Suche in Google Scholar
[9] Khaldi M, Benyoucef A, Quijada C, Yahiaoul A, Morallon E. J. Inorg. Organomet. P 2014, 24, 267–274.10.1007/s10904-013-9998-3Suche in Google Scholar
[10] Bahreini Z, Heydari V, Namdari Z. Pigm. Resin. Technol. 2017, 46, 333–341.10.1108/PRT-07-2016-0077Suche in Google Scholar
[11] Zahedi Y, Fathi-Achachlouei B, Yousefi AR. Int. J. Biol. Macromol. 2018, 108, 863–873.10.1016/j.ijbiomac.2017.10.185Suche in Google Scholar
[12] Kastan A, Yalcin Y, Unal H, Talas S. J. Fac. Eng. Archit. Gaz. 2017, 32, 89–99.Suche in Google Scholar
[13] Arjmandi R, Balakrishnan H, Hassan A, Jawaid M, Othman AY. Fibers Polym. 2018, 19, 914–926.10.1007/s12221-018-7839-2Suche in Google Scholar
[14] Awad AM, Shaikh SMR, Jalab R, Gulied MH, Nasser MS, Benamor A, Adham S. Sep. Purif. Technol. 2019, 228, UNSP 115719.10.1016/j.seppur.2019.115719Suche in Google Scholar
[15] Li ZJ, Li CP, Li DX, Jiang YX, Li Z. J. Coat. Technol. Res. 2019, 16, 597–605.10.1007/s11998-018-0141-9Suche in Google Scholar
[16] Luo W H, Sasaki K, Hirajima T. Colloid Surface A 2015, 481, 616–625.10.1016/j.colsurfa.2015.06.025Suche in Google Scholar
[17] Pavlidou S, Papaspyrides CD. Prog. Polym. Sci. 2008, 33, 1119–1198.10.1016/j.progpolymsci.2008.07.008Suche in Google Scholar
[18] Manias E, Touny A, Wu L, Strawhecker K, Lu B, Chung TC. Chem. Mater. 2001, 13, 3516–3523.10.1021/cm0110627Suche in Google Scholar
[19] Cho J W, Paul DR. Polymer 2001, 42, 1083–1094.10.1016/S0032-3861(00)00380-3Suche in Google Scholar
[20] Khelifa I, Belmokhtar A, Berenguer R, Benyoucef A, Morallon E. J. Mol. Struct. 2019, 1178, 327–332.10.1016/j.molstruc.2018.10.054Suche in Google Scholar
[21] Zhu TT, Zhou CH, Kabwe FB, Wu QQ, Li C S, Zhang J R. Appl. Clay Sci. 2019, 169, 48–66.10.1016/j.clay.2018.12.006Suche in Google Scholar
[22] Ji J, Ke Y, Pei Y, Zhang GL. J. Appl. Polym. Sci. 2017, 134, 44894.10.1002/app.44894Suche in Google Scholar
[23] Lebaron PC, Wang Z, Pinnavaia TJ. Appl. Clay Sci. 1999, 15, 11–29.10.1016/S0169-1317(99)00017-4Suche in Google Scholar
[24] Dahou F Z, Khaldi M A, Zehhaf A, Benyouced A, Ferrahi M I. Adv. Polym. Tech. 2016, 35, 411–418.10.1002/adv.21566Suche in Google Scholar
[25] Kar S, Kundu B, Reis RL, Sarkar R, Nandy P, Basu R, Das S. Eur. J. Pharm. Sci. 2019, 135, 91–102.10.1016/j.ejps.2019.05.006Suche in Google Scholar
[26] Mittal V. Appl. Clay Sci. 2012, 56, 103–109.10.1016/j.clay.2011.11.029Suche in Google Scholar
[27] Kornmann X, Lindberg H, Berglund LA. Polymer 2001, 42, 4493–4499.10.1016/S0032-3861(00)00801-6Suche in Google Scholar
[28] Kim GM, Lee DH, Hoffmann B, Kressler J, Stoppelmann G. Polymer 2001, 42, 1095–1100.10.1016/S0032-3861(00)00468-7Suche in Google Scholar
[29] He H, Ding Z, Zhu JX, Yuan P, Xi Y F, Yang D, Frost RL. Clays Clay Miner. 2005, 53, 287–293.10.1346/CCMN.2005.0530308Suche in Google Scholar
[30] Yu CC, Ke YC, Deng QC, Lu SC, Ji J Q, Hu X, Zhao Y. Appl. Sci. 2018, 8, 964.10.3390/app8060964Suche in Google Scholar
[31] Yi D, Yang H, Zhao M, Huang L, Camino G, Frache A, Yang RJ. RSC Adv. 2017, 7, 5980–5988.10.1039/C6RA27562ASuche in Google Scholar
[32] Zheng JP, Li J, Hao H, Yao KD. J. Wuhan Univ. Technol. 2013, 28, 6–11.10.1007/s11595-013-0630-8Suche in Google Scholar
[33] Bradley WF. J. Am. Chem. Soc. 1945, 67, 975–981.10.1021/ja01222a028Suche in Google Scholar
[34] Fu M, Zhang Z, Wu L, Zhuang G, Zhang S, Yuan J, Liao L. Appl. Clay Sci. 2016, 132–133, 694–701.10.1016/j.clay.2016.08.025Suche in Google Scholar
[35] Chu Q, Luo P, Zhao QF, Feng JX, Kuang XB, Wang DL. J. Appl. Polym. Sci. 2013, 128, 28–40.10.1002/app.38096Suche in Google Scholar
[36] Yeh JM, Liou SJ, Chang YW. J. Appl. Polym. Sci. 2004, 91, 3489–3496.10.1002/app.13555Suche in Google Scholar
[37] Bao Y, Ma J Z, Li N. Carbohydr. Polym. 2011, 84, 76–82.10.1016/j.carbpol.2010.10.061Suche in Google Scholar
[38] Tran NH, Dennis GR, Milev AS, Kannangara GSK, Wilson MA, Lamb RN. J. Colloid Interface Sci. 2005, 290, 392–396.10.1016/j.jcis.2005.04.069Suche in Google Scholar
[39] Solhi L, Atal M, Nodehi A, lmani M, Ghaemi A, Khosravl K. Dent. Mater. 2012, 28, 369–377.10.1016/j.dental.2011.11.010Suche in Google Scholar
[40] Xu M, Choi YS, Kim YK, Wang KH, Chung IJ. Polymer 2003, 44, 6387–6395.10.1016/S0032-3861(03)00653-0Suche in Google Scholar
[41] Ganguly A, Bhowmick AK. Nanoscale Res. Lett. 2008, 3, 36–44.10.1007/s11671-007-9111-3Suche in Google Scholar
[42] Yadav M, Rhee KY. Carbonydr. Polym. 2012, 90, 165–173.10.1016/j.carbpol.2012.05.010Suche in Google Scholar PubMed
[43] Yu CC, Ke YC, Hu X, Zhao Y, Deng QC. Polymers 2019, 11, 834.10.3390/polym11050834Suche in Google Scholar PubMed PubMed Central
[44] Xu JS, Chen DL, Hu XL, Ke YC, Zhou Q, Gao WS, Zeng ZL, Zhang GL. J. Polym. Eng. 2015, 35, 847–857.10.1515/polyeng-2014-0345Suche in Google Scholar
[45] Jiang JS, Zhang Y, Guo XZ, Zhang HQ. Macromolecules 2011, 2, 5651–5662.10.1039/c2ra01249aSuche in Google Scholar
[46] Maiti P, Nam PH, Okamoto M, Hasegawa N, Usuki A. Macromolecules 2002, 35, 2042–2049.10.1021/ma010852zSuche in Google Scholar
[47] Xie W, Gao Z, Pan W P, Hunter D, Singh A, Vala R. Chem. Mater. 2001, 13, 2979–2990.10.1021/cm010305sSuche in Google Scholar
[48] Becker O, Varley RJ, Simon GP. Eur. Polym. J. 2004, 40, 187–195.10.1016/j.eurpolymj.2003.09.008Suche in Google Scholar
©2020 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Material properties
- Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature
- A new method to calculate the surface haze
- Structure and properties of particles/rubber composites applied on functionally graded lapping and polishing plate
- Adhesive properties of bio-based epoxy resin reinforced by cellulose nanocrystal additives
- Preparation and assembly
- Encapsulation of anion-cation organo-montmorillonite in terpolymer microsphere: structure, morphology, and properties
- Preparation and characterization of chitosan grafted poly(lactic acid) films for biomedical composites
- Preparation and characterization of polyvinylpyrrolidone/cobalt ferrite functionalized chitosan graphene oxide (CoFe2O4@CS@GO-PVP) nanocomposite
- Clay/(PEG-CMC) biocomposites as a novel delivery system for ibuprofen
- Engineering and processing
- Multi-objective optimization of injection-molded plastic parts using entropy weight, random forest, and genetic algorithm methods
Artikel in diesem Heft
- Frontmatter
- Material properties
- Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature
- A new method to calculate the surface haze
- Structure and properties of particles/rubber composites applied on functionally graded lapping and polishing plate
- Adhesive properties of bio-based epoxy resin reinforced by cellulose nanocrystal additives
- Preparation and assembly
- Encapsulation of anion-cation organo-montmorillonite in terpolymer microsphere: structure, morphology, and properties
- Preparation and characterization of chitosan grafted poly(lactic acid) films for biomedical composites
- Preparation and characterization of polyvinylpyrrolidone/cobalt ferrite functionalized chitosan graphene oxide (CoFe2O4@CS@GO-PVP) nanocomposite
- Clay/(PEG-CMC) biocomposites as a novel delivery system for ibuprofen
- Engineering and processing
- Multi-objective optimization of injection-molded plastic parts using entropy weight, random forest, and genetic algorithm methods
