Preparation and characterization of polyvinylpyrrolidone/cobalt ferrite functionalized chitosan graphene oxide (CoFe2O4@CS@GO-PVP) nanocomposite
-
Mehrnaz Masoumparast
and
Hassan Kefayati
Abstract
Cobalt ferrite functionalized chitosan graphene oxide (CoFe2O4@CS@GO) was inserted successfully in polyvinylpyrrolidone (PVP), and its distribution was distinguished through scanning electron microscope (SEM) analysis. Furthermore, the thermal and structural characterizations of the CoFe2O4@CS@GO-PVP nanocomposite were accomplished via the TGA, DSC, FT-IR, and XRD methods. The magnetic characterization of the synthesized nanocomposite was specified by vibrating sample magnetometer (VSM). Results demonstrated the improved thermal stability of pure PVP with the addition of CoFe2O4@CS@GO. The DSC analysis results also showed that the glass transition temperature of 158.9°C–164.8°C was obtained for the CoFe2O4@CS@GO-PVP nanocomposites. The FT-IR spectra indicated that an interaction occurred between CoFe2O4@CS@GO and PVP. Due to a good distribution of CoFe2O4@CS@GO in the PVP matrix, the strong interaction shown by the ~18 cm−1 red shift with good complexation of the carbonyl functional group of PVP with CoFe2O4@CS@GO was observed for the CoFe2O4@CS@GO-PVP (5% w/w) nanocomposite.
References
[1] Potts JR, Dreyer DR, Bielawski CW, Ruoff RS. Polymer 2011, 52, 5–25.10.1016/j.polymer.2010.11.042Search in Google Scholar
[2] Chen D, Feng H, Li J. Chem. Rev. 2012, 112, 6027–6053.10.1021/cr300115gSearch in Google Scholar PubMed
[3] Yang GH, Bao DD, Liu H, Zhang DQ, Wang N, Li HT. J. Inorg. Organomet. Polym. 2017, 27, 1129–1141.10.1007/s10904-017-0597-6Search in Google Scholar
[4] McGrail BT, Rodier BJ, Pentzer E. Chem. Mater. 2014, 26, 5806–5811.10.1021/cm5031409Search in Google Scholar
[5] Priyadarsini S, Mohanty S, Mukherjee S, Basu S, Mishra M. J. Nanostruct. Chem. 2018, 8, 123–137.10.1007/s40097-018-0265-6Search in Google Scholar
[6] Kumar P, Huo P, Zhang R, Liu B. Nanomaterials 2019, 9, 737.10.3390/nano9050737Search in Google Scholar PubMed PubMed Central
[7] Cui Y, Kundalwal SI, Kumar S. Carbon 2016, 98, 313–333.10.1016/j.carbon.2015.11.018Search in Google Scholar
[8] Liu L, Zhang J, Zhao J, Liu F. Nanoscale 2012, 4, 5910–5816.10.1039/c2nr31164jSearch in Google Scholar PubMed
[9] Suk JW, Piner RD, An J, Ruoff RS. ACS Nano 2010, 411, 6557–6564.10.1021/nn101781vSearch in Google Scholar PubMed
[10] Kang SH, Fang TH, Hong ZH, Chuang CH. Diam. Relat. Mater. 2013, 38, 73–78.10.1016/j.diamond.2013.06.016Search in Google Scholar
[11] Savchak M, Borodinov N, Burtovyy R, Anayee M, Hu K, Ma R, Grant A, Li H, Cutshall DB, Wen Y, Koley G, Harrell WR, Chumanov G, Tsukruk V, Luzinov I. ACS Appl. Mater. Interfaces 2018, 104, 3975–3985.10.1021/acsami.7b16500Search in Google Scholar PubMed
[12] He L, Tjong SC. RSC Adv 2013, 3, 22981–22987.10.1039/c3ra45046eSearch in Google Scholar
[13] Schirmer KSU, Esrafilzadeh D, Thompson BC, Quigley AF, Kapsa RMI, Wallace GG. J. Mater. Chem. B 2016, 4, 1142–1149.10.1039/C5TB02130HSearch in Google Scholar PubMed
[14] Man SHC, Thickett SC, Whittaker MR, Zetterlund PB. J. Polym. Sci. A Polym. Chem. 2013, 51, 47–58.10.1002/pola.26341Search in Google Scholar
[15] McGrail BT, Mangadlao JD, Rodier BJ, Swisher J, Advincula R, Pentzer E. Chem. Commun. 2016, 52, 288–291.10.1039/C5CC05596BSearch in Google Scholar
[16] Han D, Xiao P, Gu J, Chen J, Cai Z, Zhang J, Wanng W, Chen T. RSC Adv 2014, 4, 22759–22762.10.1039/c4ra02826kSearch in Google Scholar
[17] Li L, Fan L, Sun M, Qiu H, Li X, Duan H. Colloids and Surfaces. B, Biointerfaces 2013, 107, 76–83.10.1016/j.colsurfb.2013.01.074Search in Google Scholar PubMed
[18] Compton OC, Jain B, Dikin DA, Abouimrane A, Amine K, Nguyen ST. ACS Nano 2011, 5, 4380–4391.10.1021/nn1030725Search in Google Scholar PubMed
[19] Dikin DA, Stankovich S, Zimney EJ, Piner RD, Dommett GH,Evmenenko G, Nguyen ST, Ruoff RS. Nature 2007, 448, 457–460.10.1038/nature06016Search in Google Scholar PubMed
[20] Dreyer DR, Park S, Bielawski CW, Ruoff RS. Chem. Soc. Rev. 2010, 39, 228–240.10.1039/B917103GSearch in Google Scholar
[21] Stampfer C, Güttinger J, Hellmüller S, Molitor F, Ensslin K, Ihn T. Phys. Rev. Lett. 2009, 102, 056403.10.1103/PhysRevLett.102.056403Search in Google Scholar PubMed
[22] Debnath S, Maity A, Pillay K. J. Environ. Chem. Eng. 2014, 2, 963–973.10.1016/j.jece.2014.03.012Search in Google Scholar
[23] Shahidi F, Synowiecki J. J. Agric. Food Chem. 1991, 398, 1527–1532.10.1021/jf00008a032Search in Google Scholar
[24] Tirosh E, Shemer G, Markovich G. Chem. Mater. 2006, 18, 465–470.10.1021/cm052401pSearch in Google Scholar
[25] Iatridi Z, Vamvakidis K, Tsougos I, Vassiou K, Dendrinou-Samara C, Bokias G. ACS Appl. Mater. Interfaces 2016, 8, 35059–35070.10.1021/acsami.6b13161Search in Google Scholar PubMed
[26] Teodorescu M, Bercea M. Polym. Plast. Technol. Eng. 2015, 54, 923–943.10.1080/03602559.2014.979506Search in Google Scholar
[27] Haghighat F, Mokhtary M. Polym. Plast. Technol. Eng. 2017, 56, 794–803.10.1080/03602559.2016.1233269Search in Google Scholar
[28] Haghighat F, Mokhtary M. J. Inorg. Organomet. Polym. 2017, 27, 779–787.10.1007/s10904-017-0521-0Search in Google Scholar
[29] Haaf F, Sanner A, Strub F. Polym. J. 1985, 17, 143–152.10.1295/polymj.17.143Search in Google Scholar
[30] Koo CM, Ham HT, Choi MH, Kim SO, Chung IJ. Polymer 2003, 44, 681–689.10.1016/S0032-3861(02)00803-0Search in Google Scholar
[31] Al-Kahtani AA, Abou Taleb MF. J. Hazard. Mater. 2016, 309, 10–19.10.1016/j.jhazmat.2016.01.071Search in Google Scholar PubMed
©2020 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Material properties
- Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature
- A new method to calculate the surface haze
- Structure and properties of particles/rubber composites applied on functionally graded lapping and polishing plate
- Adhesive properties of bio-based epoxy resin reinforced by cellulose nanocrystal additives
- Preparation and assembly
- Encapsulation of anion-cation organo-montmorillonite in terpolymer microsphere: structure, morphology, and properties
- Preparation and characterization of chitosan grafted poly(lactic acid) films for biomedical composites
- Preparation and characterization of polyvinylpyrrolidone/cobalt ferrite functionalized chitosan graphene oxide (CoFe2O4@CS@GO-PVP) nanocomposite
- Clay/(PEG-CMC) biocomposites as a novel delivery system for ibuprofen
- Engineering and processing
- Multi-objective optimization of injection-molded plastic parts using entropy weight, random forest, and genetic algorithm methods
Articles in the same Issue
- Frontmatter
- Material properties
- Interface properties of carbon fiber reinforced cyanate/epoxy resin composites at cryogenic temperature
- A new method to calculate the surface haze
- Structure and properties of particles/rubber composites applied on functionally graded lapping and polishing plate
- Adhesive properties of bio-based epoxy resin reinforced by cellulose nanocrystal additives
- Preparation and assembly
- Encapsulation of anion-cation organo-montmorillonite in terpolymer microsphere: structure, morphology, and properties
- Preparation and characterization of chitosan grafted poly(lactic acid) films for biomedical composites
- Preparation and characterization of polyvinylpyrrolidone/cobalt ferrite functionalized chitosan graphene oxide (CoFe2O4@CS@GO-PVP) nanocomposite
- Clay/(PEG-CMC) biocomposites as a novel delivery system for ibuprofen
- Engineering and processing
- Multi-objective optimization of injection-molded plastic parts using entropy weight, random forest, and genetic algorithm methods
