Startseite An investigation on electro-induced shape memory performances of CE/EP/CB/SCF composites applied for deployable structure
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

An investigation on electro-induced shape memory performances of CE/EP/CB/SCF composites applied for deployable structure

  • Tianning Ren EMAIL logo , Guangming Zhu EMAIL logo , Yi Liu und Xiao Hou
Veröffentlicht/Copyright: 15. Januar 2020
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Journal of Polymer Engineering
Aus der Zeitschrift Journal of Polymer Engineering Band 40 Heft 3

Abstract

The objective of this work is to investigate the thermomechanical, electrical, and shape-memory properties of bisphenol A-type cyanate ester (BACE)/polybutadiene epoxy (PBEP)/carbon black (CB) composite and assess its feasibility applied for deployable structure. Using a BACE/PBEP polymer as matrix and superconducting carbon black (CB) and short carbon fibers (SCFs) as reinforcing material, the shape memory composite was prepared by compression molding. The effects of CB and SCF content on the shape memory properties of the composites were investigated. The results demonstrate that the glass transition temperature (Tg) and the storage modulus of the composites increases as SCFs content increase. Because of the synergic effect of CB and SCFs, the shape memory composites exhibit excellent shape memory performance, and the shape recovery ratio is about 100%. With the increase in SCF content, the recovery time decreased, and the volume electrical resistivity of the composite could decrease by adding a small amount of SCFs. According to the above results, a shape memory polymer composite deployable structure was prepared.

Keywords: bisphenol A type epoxy resin; deployable structure; electro-induced; polybutadiene epoxy resin; shape memory polymer

  1. Conflict of interest statement: The authors declare that they have no conflict of interest.

References

[1] Arnebold A, Hartwig A. Polymer 2016, 83, 40–49.10.1016/j.polymer.2015.12.007Suche in Google Scholar

[2] Zhao Q, Zou W, Luo Y, Xie T. Sci. Adv. 2016, 2, 1–7.10.1126/sciadv.1501297Suche in Google Scholar

[3] Neville RM, Chen J, Guo X. Smart. Mater. Struct. 2017, 26, 1–11.10.1088/1361-665X/aa6b6dSuche in Google Scholar

[4] Huang J, Zhang Q, Scarpa F, Liu Y, Leng J. Compos. Struct. 2017, 7, 91–104.Suche in Google Scholar

[5] Saleeb AF, Natsheh SH, Owusu-Danquah JS. Polymer 2017, 130, 230–241.10.1016/j.polymer.2017.10.003Suche in Google Scholar

[6] Liu Y, Zhao J, Zhao L. ACS Appl. Mater. Interfaces 2015, 8, 311–320.10.1021/acsami.5b08766Suche in Google Scholar PubMed

[7] Eisenhaure J, Kim S. Int. J. Adhes. Adhes. 2017, 11, 8–18.Suche in Google Scholar

[8] Butaud P, Foltête E, Ouisse M. Compos. Struct. 2016, 153, 401–408.10.1016/j.compstruct.2016.06.040Suche in Google Scholar

[9] Leng J, Lan X, Liu Y, Du S. Prog. Mater. Sci. 2011, 56, 1077–1135.10.1016/j.pmatsci.2011.03.001Suche in Google Scholar

[10] Leng J, Lv H, Liu Y, Du S. Appl. Phys. Lett. 2007, 91, 144105.10.1063/1.2790497Suche in Google Scholar

[11] Hasan SM, Thompson RS, Emery H. RSC Adv. 2016, 6, 918–927.10.1039/C5RA22633CSuche in Google Scholar PubMed PubMed Central

[12] Yao Y, Hoang PT, Liu T. J. Mater. Sci. Technol. 2017, 33, 869–873.10.1016/j.jmst.2016.05.017Suche in Google Scholar

[13] Fang Z, Zheng N, Zhao Q, Xie T. ACS Appl. Mater. Interfaces 2017, 9, 22077.10.1021/acsami.7b05713Suche in Google Scholar PubMed

[14] Tian GM, Zhu GM, Xu SG, Ren TN. Smart. Mater. Struct. 2019, 28, 105006.10.1088/1361-665X/ab34b2Suche in Google Scholar

[15] Wei K, Zhu G, Tang Y, Liu T, Xie J. J. Mater. Res. 2013, 28, 2903–2910.10.1557/jmr.2013.277Suche in Google Scholar

[16] Wang K, Zhu G, Lei N, Wang Y, Zhe L. J. Polym. Res. 2013, 21, 385.10.1007/s10965-014-0478-4Suche in Google Scholar

[17] Wang C, Wang Y, Wang C, Wang Y, Wang C, Wang Y. Composites B 2017, 9, 39–49.10.1016/j.compstruct.2016.01.013Suche in Google Scholar

[18] Chen HM, Wang L, Zhou SB. Chin J. Polym. Sci. 2018, 36, 905–917.10.1007/s10118-018-2118-7Suche in Google Scholar

[19] Luo X, Mather PT. Soft Matter 2010, 6, 2146–2149.10.1039/c001295eSuche in Google Scholar

[20] Chen T, Qiu J, Zhu K, Ji H, Fan C, Chen Q. J. Mater. Sci. Mater. Electron. 2013, 24, 2013–2018.10.1007/s10854-012-1050-9Suche in Google Scholar

[21] Yang B, Chen G, Li J, Guo S. Acta Mater. Compos. Sin. 2009, 26, 41–46.Suche in Google Scholar

[22] Yu K, Zhang Z, Liu Y, Leng J. Appl. Phys. Lett. 2011, 98, 074102.10.1063/1.3556621Suche in Google Scholar

Received: 2019-07-03
Accepted: 2019-12-18
Published Online: 2020-01-15
Published in Print: 2020-02-25

©2020 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Material properties
  3. The effect of unidirectional shear flow-induced orientation on foaming properties of polypropylene
  4. An investigation on electro-induced shape memory performances of CE/EP/CB/SCF composites applied for deployable structure
  5. Nanocomposite film with green synthesized TiO2 nanoparticles and hydrophobic polydimethylsiloxane polymer: synthesis, characterization, and antibacterial test
  6. Preparation and assembly
  7. Binary solvent systems for durable self-adhesive conductive hydrogels
  8. Development of surface properties of ultra-high-molecular-weight polyethylene film using side-chain crystalline block copolymers
  9. Highly porous, fast responding acrylamide hydrogels through emulsion polymerization using coconut oil
  10. Engineering and processing
  11. Multizone barrel temperature control of the eccentric rotor extrusion process
  12. The influence of mold temperature on thermoset in-mold forming
  13. Innovative γ rays irradiated styrene butadiene rubber/reclaimed waste tire rubber blends: a comparative study using mechano-chemical and microwave devulcanizing methods
  14. Experimental study on influence of molding parameters on self-reinforcement characteristics of polymer co-injection molding
https://doi.org/10.1515/polyeng-2019-0212
Schlagwörter für diesen Artikel
bisphenol A type epoxy resin; deployable structure; electro-induced; polybutadiene epoxy resin; shape memory polymer

Artikel in diesem Heft

  1. Frontmatter
  2. Material properties
  3. The effect of unidirectional shear flow-induced orientation on foaming properties of polypropylene
  4. An investigation on electro-induced shape memory performances of CE/EP/CB/SCF composites applied for deployable structure
  5. Nanocomposite film with green synthesized TiO2 nanoparticles and hydrophobic polydimethylsiloxane polymer: synthesis, characterization, and antibacterial test
  6. Preparation and assembly
  7. Binary solvent systems for durable self-adhesive conductive hydrogels
  8. Development of surface properties of ultra-high-molecular-weight polyethylene film using side-chain crystalline block copolymers
  9. Highly porous, fast responding acrylamide hydrogels through emulsion polymerization using coconut oil
  10. Engineering and processing
  11. Multizone barrel temperature control of the eccentric rotor extrusion process
  12. The influence of mold temperature on thermoset in-mold forming
  13. Innovative γ rays irradiated styrene butadiene rubber/reclaimed waste tire rubber blends: a comparative study using mechano-chemical and microwave devulcanizing methods
  14. Experimental study on influence of molding parameters on self-reinforcement characteristics of polymer co-injection molding
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.12.2025 von https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2019-0212/html?lang=de
Button zum nach oben scrollen