Natural frequency response of laminated hybrid composite beams with and without cutouts
-
Ahmet Erkliğ
,
Mehmet Bulut
Abstract
This study deals with the effect of hybridization on the natural frequency of woven laminated hybrid composite beams with and without cutouts under the clamped-free boundary condition. Woven carbon, Kevlar and S-glass fibers with epoxy were used for the production of hybrid composites. Natural frequencies of the hybrid composite beams were experimentally determined for [(0/90)3]S stacking sequence. Numerical analyses were performed to investigate the influences of fiber orientation angles, circular and rectangular cutouts, cutout size ratios and positions on natural frequency. Good agreement between experimental and numerical results was found from a comparison of natural frequencies. The results shows that the fiber type used in the layers, cutout size and position on the beam strongly effects the natural frequency.
References
[1] Xu L, Wang R, Zhang S, Liu Y. J. Compos. Mater. 2011, 45, 1069–1076.Suche in Google Scholar
[2] Maheri MR. J. Compos. Mater. 2010, 45, 1411–1422.Suche in Google Scholar
[3] Aydogdu M, Timarci T. Compos. Sci. Technol. 2003, 63, 1061–1070.Suche in Google Scholar
[4] Gökmen A, Hasan Ç, Sahin C, Muzaffer T, Ugur Y. J. Reinf. Plast. Compos. 2009, 28, 881–892.Suche in Google Scholar
[5] Bassiouni AS, Gad-Elrab RM, Elmahdy TH. Compos. Struct. 1999, 44, 81–87.Suche in Google Scholar
[6] Banerjee JR. Int. J. Solids Struct. 2001, 38, 2415–2426.Suche in Google Scholar
[7] Gibson RF. Compos. Sci. Technol. 2000, 60, 2769–2780.Suche in Google Scholar
[8] Ramtekkar G, Desai Y. J. Sound Vib. 2002, 257, 635–651.Suche in Google Scholar
[9] Rath MK, Sahu SK. J. Vib. Control 2011, 18, 1–14.10.1177/1077546311428638Suche in Google Scholar
[10] Adali S, Verijenko VE. Compos. Struct. 2001, 54, 131–138.Suche in Google Scholar
[11] Saffry Z, Majid D, Haidzir N. World Acad. Sci. Eng. Tech. 2013, 78, 186–191.Suche in Google Scholar
[12] Chen CS, Chen WR, Chien RD. Eur. J. Mech. A-Solid 2009, 28, 329–337.10.1016/j.euromechsol.2008.06.004Suche in Google Scholar
[13] Chen CS. J. Reinf. Plast. Compos. 2005, 24, 1747–1758.Suche in Google Scholar
[14] Yang J, Xiong J, Ma L, Wang B, Zhang G, Wu L. Compos. Struct. 2013, 106, 570–580.Suche in Google Scholar
[15] Natarajan S, Deogekar PS, Manickam G, Belouettar S. Compos. Struct. 2014, 108, 848–855.Suche in Google Scholar
[16] Erklig A, Bulut M, Yeter E. Sci. Eng. Compos. Mater. 2013, 20, 179–185.Suche in Google Scholar
[17] Turvey G, Mulcahy N, Widden M. Compos. Struct. 2000, 50, 391–403.Suche in Google Scholar
[18] Iyengar NGR, Prasad AB. IES J. Part A: Civ. Struct. Eng. 2010, 3, 161–167.Suche in Google Scholar
[19] ASTM D 638-10:2010. Standard Test Method for Tensile Properties of Plastics.Suche in Google Scholar
[20] ANSYS Procedures. Engineering Analysis System Verification Manual, Vol. 1. Houston (P.A., USA): Swanson Analysis System, Inc., 1993.Suche in Google Scholar
©2014 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
Artikel in diesem Heft
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
