Article
Publicly Available
Masthead
Published/Copyright:
November 1, 2013
Published Online: 2013-11-01
Published in Print: 2013-11-01
©2013 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- Masthead
- Original articles
- Grafting of maleic anhydride on polypropylene by reactive extrusion: effect of maleic anhydride and peroxide concentrations on reaction yield and products characteristics
- An optical system for measuring the residence time distribution in co-rotating twin-screw extruders
- Effect of processing technology on the morphological, mechanical and electrical properties of conductive polymer composites
- Thermodynamic modeling of polyamide-6 (PA-6)/cellulose acetate (CA) blend membrane prepared via casting technique
- Monte Carlo simulation of ionic conductivity in polyethylene oxide
- Impact fracture toughness and morphology of polypropylene/Mg(OH)2 composites
- High impact toughness of polyamide 6/poly (vinylidene fluoride) blends induced by an ionic liquid
- Application of chemically-cross-linked chitosan for the removal of Reactive Black 5 and Reactive Yellow 84 dyes from aqueous solutions
- Flame retardation behaviors of UV-curable phosphorus-containing PU coating system
- Preparation and characterization of modified chitosan for in vitro controlled release of vitamin B12
- Surface modification of nano-alumina and its application in preparing polyacrylate water-based wood coating
Articles in the same Issue
- Masthead
- Masthead
- Original articles
- Grafting of maleic anhydride on polypropylene by reactive extrusion: effect of maleic anhydride and peroxide concentrations on reaction yield and products characteristics
- An optical system for measuring the residence time distribution in co-rotating twin-screw extruders
- Effect of processing technology on the morphological, mechanical and electrical properties of conductive polymer composites
- Thermodynamic modeling of polyamide-6 (PA-6)/cellulose acetate (CA) blend membrane prepared via casting technique
- Monte Carlo simulation of ionic conductivity in polyethylene oxide
- Impact fracture toughness and morphology of polypropylene/Mg(OH)2 composites
- High impact toughness of polyamide 6/poly (vinylidene fluoride) blends induced by an ionic liquid
- Application of chemically-cross-linked chitosan for the removal of Reactive Black 5 and Reactive Yellow 84 dyes from aqueous solutions
- Flame retardation behaviors of UV-curable phosphorus-containing PU coating system
- Preparation and characterization of modified chitosan for in vitro controlled release of vitamin B12
- Surface modification of nano-alumina and its application in preparing polyacrylate water-based wood coating
