Highly-filled hybrid composites prepared using centrifugal deposition
-
Norlinda Daud
und
Robert A. Shanks
Abstract
Natural composites of high filler content, such as nacre, a composite comprised of 95–99% w/w aragonite layers, have been of interest due to their hardness, strength and toughness. High filler content composites have been prepared synthetically, although due to viscosity and processing requirements, the filler content was limited compared with natural systems. In this paper we describe hybrid high filler content composites prepared to be biomimetic of nacre. Development of processing conditions increased the filler content from 50% w/w using a laboratory stirrer to obtain hybrid composites with 77–86% w/w filler content, prepared by centrifugal deposition and hot compression molding techniques. Both methods were very different from natural formation from layer-by-layer (LBL) construction, however, the composites formed were of high filler content approaching the level in nature. The composites exhibited high modulus and strength, although deformation at break was low, consistent with highly filled materials. Glass transition of the resin phase was increased slightly, while damping was decreased by filler content. Surface morphology of the fractured composite showed a layered structure of well dispersed fillers with minute voids scattered evenly, indicating that the composite was effectively compacted.
References
[1] Luz GM, Mano JF. Compos. Sci. Technol. 2010, 70, 1777–1788.Suche in Google Scholar
[2] Currey JD. Proc. R. Soc. B 1977, 196, 443–463.10.1098/rspb.1977.0050Suche in Google Scholar
[3] Jackson AP, Vincent JFV, Turner RM. Proc. R. Soc. B 1988, 234, 415–440.10.1098/rspb.1988.0056Suche in Google Scholar
[4] Barthelat F, Tang H, Zavattieri PD, Li CM, Espinosa HD. J. Mech. Phys. Sol. 2007, 55, 306–337.Suche in Google Scholar
[5] Cartwright JHE, Checa AG. J. R. Soc. Interface 2007, 4, 491–504.10.1098/rsif.2006.0188Suche in Google Scholar PubMed PubMed Central
[6] Tushtev K, Murck M, Grathwohl G. Mater. Sci. Eng. C 2008, 28, 1164–1172.10.1016/j.msec.2007.10.039Suche in Google Scholar
[7] Yao N, Epstein AK, Liu WW, Sauer F, Yang N. J. R. Soc. Interface 2009, 6, 367–376.10.1098/rsif.2008.0316Suche in Google Scholar PubMed PubMed Central
[8] Chateigner D, Ouhenia S, Krauss C, Belkhir M, Morales M. Nucl. Instrum. Methods Phys. Res. B 2010, 268, 341–345.10.1016/j.nimb.2009.07.007Suche in Google Scholar
[9] Mayer G. Science 2005, 298, 1144–1147.10.1126/science.1116994Suche in Google Scholar PubMed
[10] Sanchez C, Arribart H, Giraud-Guille MM. Nat. Mater. 2005, 4, 1–12.Suche in Google Scholar
[11] Luz GM, Mano JF. Phil. Trans. R. Soc. A 2009, 367, 1587–1605.10.1098/rsta.2009.0007Suche in Google Scholar PubMed
[12] Gehrke N, Nassif N, Pinna N, Antonietti M, Gupta HS, Colfen H. Chem. Mater. 2005, 17, 6514–6516.Suche in Google Scholar
[13] Oaki Y, Imai H. Angew. Chem. Int. Ed. 2005, 44, 6571–6575.Suche in Google Scholar
[14] Oaki Y, Kotachi A, Miura T, Imai H. Adv. Funct. Mater. 2006, 16, 1633–1639.Suche in Google Scholar
[15] Dong W, Cheng H, Yao Y, Zhou Y, Tong G, Yan D, Lai Y, Li W. Langmuir 2011, 27, 366–370.10.1021/la1034799Suche in Google Scholar PubMed
[16] Xu AW, Ma Y, Colfen H. J. Mater. Chem. 2007, 17, 415–449.Suche in Google Scholar
[17] Sellinger A, Weiss PM, Nguyen A, Lu Y. Assink RA, Gong W, Brinker J. Nature 1998, 394, 256–260.10.1038/28354Suche in Google Scholar
[18] Tang Z, Kotov NA, Magonov S, Ozturk B. Nat. Mater. 2003, 2, 413–418.Suche in Google Scholar
[19] Zhang X, Liu CL, Wu WJ, Wang JF. Mater. Lett. 2006, 60, 2086–2089.Suche in Google Scholar
[20] Podsiadlo P, Tang Z, Shim BS, Kotov NA. Nano Lett. 2007, 7, 1224–1231.Suche in Google Scholar
[21] Zlotnikov I, Gotman I, Burghard Z, Bill J, Gutmanas EY. Coll. Surf. A 2010, 361, 138–142.10.1016/j.colsurfa.2010.03.013Suche in Google Scholar
[22] Vertlib V, Dietiker M, Plotze M, Yezek L, Spolenak R, Puzrin AM. J. Mater. Res. 2008, 23, 1026–1035.Suche in Google Scholar
[23] Orozco VH, Kozlovskaya V, Kharlampieva E, Lopez BL, Tsukruk V. Polymer 2010, 51, 4127–4139.10.1016/j.polymer.2010.06.060Suche in Google Scholar
[24] Kato T. Adv. Mater. 2000, 12, 1543–1546.Suche in Google Scholar
[25] Ludwigs S, Steiner U, Kulak AN, Lam R, Meldrum FC. Adv. Mater. 2006, 18, 2270–2273.Suche in Google Scholar
[26] Wei H, Ma N, Shi F, Wang ZQ, Zhang X. Chem. Mater. 2007, 19, 1974–1978.Suche in Google Scholar
[27] Long B, Wang CA, Lin W, Huang Y, Sun J. Comp. Sci. Tech. 2007, 67, 2770–2774.Suche in Google Scholar
[28] Wang CA, Long B, Lin W, Huang Y, Sun J. J. Mater. Res. 2008, 23, 1706–1712.Suche in Google Scholar
[29] Lin W, Wang C, Le H, Long B, Huang Y. Mater. Sci. Eng. C 2008, 28, 1031–1037.10.1016/j.msec.2007.04.030Suche in Google Scholar
[30] Lin TH, Huang WH, Jun IK, Jiang P. Electrochem. Commun. 2009, 11, 14–17.Suche in Google Scholar
[31] Lin TH, Huang WH, Jun IK, Jiang P. Electrochem. Commun. 2009, 11, 1635–1638.Suche in Google Scholar
[32] Wang C, Huang Y, Zan Q, Guo H, Cai S. Mater. Sci. Eng. C 2000, 11, 9–12.10.1016/S0928-4931(00)00133-8Suche in Google Scholar
[33] Chen R, Wang C, Huang Y, Le H. Mater. Sci. Eng. C 2008, 28, 218–222.10.1016/j.msec.2006.12.008Suche in Google Scholar
[34] Zhu A, Cai A, Zhou W, Shi Z. Appl. Surf. Sci. 2008, 254, 3745–3752.Suche in Google Scholar
[35] Kang S, Hong SI, Choe CR, Park M, Rim S, Kim J. Polymer 2001, 42, 879–887.10.1016/S0032-3861(00)00392-XSuche in Google Scholar
[36] Reynaud E, Jouen T, Gauthier C, Vigier G, Varlet J. Polymer 2001, 42, 8759–8768.10.1016/S0032-3861(01)00446-3Suche in Google Scholar
[37] Turi EA. Thermal Characterization of Polymeric Materials, 1st ed., Academic Press: New York, 1997, p. 980.Suche in Google Scholar
©2014 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
Artikel in diesem Heft
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
