Characterization of C2H2O4 doped PVA solid polymer electrolyte
-
Karur Alakanandana
,
Annadanam Rama Subrahmanyam
Abstract
A novel solid polymer electrolyte based on poly vinyl alcohol (PVA) with oxalic acid was prepared by the solution caste technique. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) measurements carried out on the samples clearly revealed the modification of the PVA structure; the PVA crystallinity was reduced with increasing oxalic acid content and became more amorphous. The surface morphology of these complexed polymer electrolytes was analyzed by scanning electron microscopy (SEM). Fourier transform infrared spectroscopy (FTIR) spectral studies of the samples suggested that the interaction between H+ ions of oxalic acid and oxygen of the hydroxyl group (OH) of PVA plays a major role in proton conductivity. The optical absorption studies were performed on these samples in a range of wave numbers from 200 nm to 600 nm and the optical band gap values were evaluated. Direct current (DC) conductivity was measured and temperature dependence in the range 27–273°C was studied. It was observed that the conductivity at temperatures beyond the glass transition temperature (Tg) showed a Vogel-Tamman-Fulcher (VTF) type behavior. The electrical conductivity studies on PVA with oxalic acid, in a 70:30 proportion by wt%, demonstrated that the polymer composite is a promising electrolyte for applications in electrochemical cells.
Acknowledgments
The authors thank the Head of the Department of Physics, Osmania University and the Chairman of the Board of Studies in Physics, Osmania University for their constant encouragement and providing experimental facilities for this work. Also, the authors thank the coordinator of the SAP Department of Physics for providing the necessary facilities. One of the authors (KA) thanks the Director, G. Narayanamma, Institute of Technology and Science for his constant encouragement. One of the authors (ARS) thanks the Principal, MVSR College of Engineering for his constant encouragement.
References
[1] Armand MB. Annu. Rev. Matter Sci. 1986, 16, 245–261.Suche in Google Scholar
[2] Ratnaker MA, Shriver DF. Chem. Rev. 1988, 88, 108.Suche in Google Scholar
[3] MacCallum JR, Vincent CA, Eds., Polymer Electrolyte Reviews, Elsevier: Amsterdam, 1987.Suche in Google Scholar
[4] Owen JR, Lasker AL, Chandra S. In Superionic Solids and Solid State Electrolytes- Recent Trends, Academic Press: New York, 1989.Suche in Google Scholar
[5] Murata K. Electrochimica Acta 1995, 40, 2177–2184.10.1016/0013-4686(95)00160-GSuche in Google Scholar
[6] Bhargav PB, Mohan VM, Sharma AK, Rao VVRN. Ionics 2007, 13, 173–178.10.1007/s11581-007-0102-2Suche in Google Scholar
[7] Boudakgi A, Jezierska J, Kolarz BN. Macromol. Chem. Macromol. Symp. 1992, 59, 343–352.Suche in Google Scholar
[8] Changkakoti R, Singh A, Lessard RA, Manivannan G. Opt. Eng. 1993, 32, 2240–2245.Suche in Google Scholar
[9] Kuroda S, Murata K, Noguchi T, Ohnishi T. J. Phys. Soc. Jpn. 1995, 64, 1363.Suche in Google Scholar
[10] Lewandowski A, Galinski M, Skorupska K. Polish J. Chem. 2001, 1920, 1913–1920.Suche in Google Scholar
[11] Petty-Weeks S, Zupancic JJ, Swedo JR. Solid State Ionics 1988, 31, 17–20.10.1016/0167-2738(88)90282-2Suche in Google Scholar
[12] Hodge RM, Edward GH, Simon GP. Polymer 1996, 37, 1371–1376.10.1016/0032-3861(96)81134-7Suche in Google Scholar
[13] Robitaille CD, Fanteux D. J. Electrochem. Soc. 1986, 133, 315–325.Suche in Google Scholar
[14] Patel SK, Patel RB, Awadhia A, Chand N, Agarwal SL. Pramana 2007, 9, 467–475.10.1007/s12043-007-0148-8Suche in Google Scholar
[15] Davis DS, Shalliday TS. Phys. Rev. 1960, 118, 1020.Suche in Google Scholar
[16] Thutupalli GM, Tomlin G. J. Phys. D: Appl. Phys. 1976, 9, 1639.Suche in Google Scholar
[17] Carvalho LM, Gueágan P, Cheradame H, Gomes AS. Eur. Polym. J. 2000, 36, 401–409.Suche in Google Scholar
[18] Othman L, Chew KW, Osman Z. Ionics 2007, 13, 337–342.10.1007/s11581-007-0120-0Suche in Google Scholar
[19] Druger SD, Nitzam A, Ratner MA. J. Chem. Phys. 1983, 79, 3133.Suche in Google Scholar
[20] Devendrappa H, Subba Rao UV, Amibika Prasad MVN. J. Power Sources 2006, 155, 368.10.1016/j.jpowsour.2005.05.014Suche in Google Scholar
[21] Vogel H. Phys. Z. 1922, 22, 645.Suche in Google Scholar
[22] Narasimha Rao VVR, Mahendar T, Subba Rao B. J. Non-Cryst. Solids 1988, 104, 224–228.10.1016/0022-3093(88)90392-4Suche in Google Scholar
[23] Uma T, Mahalingam T, Stimming U. Mater. Chem. Phys. 2005, 90, 245–249.Suche in Google Scholar
[24] Subba Reddy ChV, Sharma AK, Narasimha Rao VVR. J. Polym. 2006, 47, 1318–1323.Suche in Google Scholar
[25] Bhide A, Hariharan K. J. Power Sources 2006, 159, 1450–1457.10.1016/j.jpowsour.2005.11.096Suche in Google Scholar
[26] Chand N, Rai N, Agarwal SL, Patel SK. Bull. Mater. Sci. 2011, 34, 1297–1304.Suche in Google Scholar
[27] Hiran Kumar G, Selvasekarapandian S, Kuwata N, Hattori T. J. Power Sources 2005, 144, 262–267.10.1016/j.jpowsour.2004.12.019Suche in Google Scholar
©2014 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
Artikel in diesem Heft
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
