Abstract
The effect of gold nanoparticles (AuNPs) on the electronic transport in chitosan and chitosan/AuNPs films was experimentally and theoretically studied. The electronic properties (current-voltage curves) relative to the transport in the organic bulk in films were fitted to various models: space-charge limited current (SCLC), trap-charge limited current (TCLC) and scaling rule. However, it was found that the TCLC model, ITCLC(V)αVl+1 and scaling rule, I(V)α(V-VT)ξ, describes better the electronic transport in chitosan and chitosan/AuNPs films. Current-voltage (I-V) curves showed an increasing conductivity with the AuNPs concentration. In addition, a bistable behavior was observed in chitosan/AuNPs films and it was attributed to the electron capture in the AuNPs. The results reported in this paper indicate that the electronic conductivity and bistable behavior in chitosan/AuNPs films could be controlled by the AuNPs incorporation on the chitosan matrix.
Acknowledgments
The authors gratefully acknowledge the financial support from Fundação de Apoio à Pesquisa do Estado de São Paulo (FAPESP), grant number 2010/50424-3 and the laboratories of Chemistry, Biology and Functionality and Food Technology of the Animal Science and Food Engineering College, University of São Paulo, for the measurements of UV-Vis spectra, and energy dispersive X-ray spectroscopy, respectively.
References
[1] Weiss EA, Kriebel JK, Rampi MA, Whitesides GM. Phil. Trans. R. Soc. A. 2007, 365, 1509–1537.Suche in Google Scholar
[2] Burn PL, Holmes AB, Kraft A, Bradley DDC, Brown RA, Friend RH, Gymer RW. Nature 1992, 356, 47–49.10.1038/356047a0Suche in Google Scholar
[3] Brütting W, Berleb S, Mückl AG. Org. Electron. 2001, 2, 1–36.Suche in Google Scholar
[4] Müller CD, Falcou A, Reckefuss N, Rojahn M, Wiederhirn V, Rudati P, Frohne H, Nuyken O, Becker H, Meerholz K. Nature 2003, 421, 829–832.10.1038/nature01390Suche in Google Scholar
[5] Lo SC, Anthopoulos TD, Namdas EB, Burn PL, Samuel IDW. Adv. Mater. 2005, 17, 1945–1948.Suche in Google Scholar
[6] Seo JH, Seo JH, Park JH, Kim JH, Hyung GW, Lee KH, Yoon SS, Kim YK. Appl. Phys. Lett. 2007, 90, 203507.Suche in Google Scholar
[7] Tang CW, Slyke SAV. Appl. Phys. Lett. 1987, 51, 913–915.Suche in Google Scholar
[8] Burroughes JH, Bradley DDC, Brown AR, Marks RN, Mackley K, Friend RH, Burns PL, Holmes AB. Nature 1990, 347, 539–541.10.1038/347539a0Suche in Google Scholar
[9] Mizukani M, Hirohata N, Iseki T, Ohtawara K, Tada T, Yagyu S, Abe T, Suzuki T, Fujisaki Y, Inoue Y, Tokio S, Kurita T. IEEE Electron Device Lett. 2006, 27, 249–251.Suche in Google Scholar
[10] Granier F, Hajlaoui R, Yassar A, Srivastava P. Science 1994, 265, 1684–1686.10.1126/science.265.5179.1684Suche in Google Scholar
[11] Dennler G, Sariciftci NS. Proc. IEEE 2005, 93, 1429–1439.10.1109/JPROC.2005.851491Suche in Google Scholar
[12] Feng D, Wang F, Chen Z. Sens. Actuators, B 2009, 138, 539–544.10.1016/j.snb.2009.02.048Suche in Google Scholar
[13] Reddy VS, Karak S, Ray SK, Dhar A. Org. Electron. 2009, 10, 138–144.Suche in Google Scholar
[14] Luo XL, Xu JJ, Zhang Q, Yang GJ, Chen HY. Biosens. Bioelectron. 2005, 21, 190–196.Suche in Google Scholar
[15] Huang H, Yuan Q, Yang X. J. Colloid Interface Sci. 2005, 282, 26–31.Suche in Google Scholar
[16] Wei D, Quian W. Colloids Surf., B 2008, 62, 136–142.10.1016/j.colsurfb.2007.09.030Suche in Google Scholar
[17] Ayala G, Vercik LCO, Menezes TAV, Vercik A. Mater. Res. Soc. Proc. 2012, 1386, mrsf11-1386-d11-03.Suche in Google Scholar
[18] Shervani Z, Yamamoto Y. Carbohydr. Res. 2011, 346, 651–658.Suche in Google Scholar
[19] Filippo E, Serra A, Buccolieri A, Manno D. J. Non-Cryst. Solids 2010, 365, 344–350.10.1016/j.jnoncrysol.2009.11.021Suche in Google Scholar
[20] Murphy CJ, Gole AM, Stone JW, Sisco PN, Alkilany AM, Goldsmith EC, Baxter SC. Acc. Chem. Res. 2008, 41, 1721–1730.Suche in Google Scholar
[21] Jiang P, Zhou JJ, Li R, Gao Y, Sun TL, Zhao XW, Xiang YL, Xie SS. J. Nanopart. Res. 2006, 8, 927–934.Suche in Google Scholar
[22] Shankar SS, Ahmad A, Pasricha R, Sastry M. J. Mater. Chem. 2003, 13, 1822–1826.Suche in Google Scholar
[23] Leong WL, Mathews N, Mhaisalkar SG, Chen TP, Lee PS. Appl. Phys. Lett. 2008, 93, 222908.Suche in Google Scholar
[24] Walker AB, Kambili A, Martin SJ. J. Phys.: Condens. Matter 2002, 14, 9825–9876.10.1088/0953-8984/14/42/303Suche in Google Scholar
[25] Zabet-Khosousi A, Dhirani AA. Chem. Rev. 2008, 108, 4072–4124.Suche in Google Scholar
[26] Houili H, Tutis E, Izquierdo R. Org. Electron. 2010, 11, 514–520.Suche in Google Scholar
[27] Hun JJ, Whan TK. Curr. Appl. Phys. 2010, 10, e42–e45.Suche in Google Scholar
[28] Goldman VJ, Tsui DC, Cunningham JE. Phys. Rev. Lett. 1987, 58, 1256–1259.Suche in Google Scholar
[29] Sandu T, Kirk WP. Physica E, 2003, 19, 83–88.10.1016/S1386-9477(03)00295-9Suche in Google Scholar
[30] Tanaka Y, Manaka T, Iwamoto M. Chem. Phys. Lett. 2011, 507, 195–198.Suche in Google Scholar
[31] Lee K, Weis M, Lin J, Taguchi D, Majkova E, Manaka T, Iwamoto M. J. Appl. Phys. 2011, 109, 064512.Suche in Google Scholar
[32] Sangeeth CSS, Stadler P, Schaur S, Sariciftci NS, Menon R. M. J. Appl. Phys. 2010, 108, 1–7.Suche in Google Scholar
[33] Tseng C-W, Tao Y-T. ACS Appl. Mater. Interfaces 2010, 2, 3231–3240.10.1021/am100696vSuche in Google Scholar PubMed
©2014 by Walter de Gruyter Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original articles
- Electronic transport in organic memories of chitosan with gold nanoparticles
- The influence of transport layers on the photodegradation stability of polymer solar cell structures
- Synthesis and properties of acrylamide 2-acrylamido-2-methypropane sulfonic acid sodium styrene sulfonate N-vinyl pyrrolidone quadripolymer and its reduction of drilling fluid filtration at high temperature and high salinity
- Synthesis and characterization of a series of novel amino β-cyclodextrin-conjugated poly(ε-lysine) derivatives
- Cellulose fibre-cellulose acetate hybrid composites with nanosilica
- Assessment and influence of internal rigid core on the contact parameters for soft hemispherical fingertips
- Properties of high temperature resistance and salt tolerance drilling fluids incorporating acrylamide/2-acrylamido-2-methyl-1-propane sulfonic acid/N-vinylpyrrolidone/dimethyl diallyl ammonium chloride quadripolymer as fluid loss additives
- Thermotropic overheating protection glazings: effect of functional additives and processing conditions on the overheating protection performance
- Experimental rapid surface heating by induction for injection molding of large LCD TV frames
- Effect of reaction conditions on the thermal stability of polystyrene grafted oil palm empty fruit bunch (OPEFB) fiber
- Compatibilization of polyamide 6/poly(2,6-dimethyl-1,4-phenylene oxide) blends by poly(styrene-co-maleic anhydride)
Artikel in diesem Heft
- Frontmatter
- Original articles
- Electronic transport in organic memories of chitosan with gold nanoparticles
- The influence of transport layers on the photodegradation stability of polymer solar cell structures
- Synthesis and properties of acrylamide 2-acrylamido-2-methypropane sulfonic acid sodium styrene sulfonate N-vinyl pyrrolidone quadripolymer and its reduction of drilling fluid filtration at high temperature and high salinity
- Synthesis and characterization of a series of novel amino β-cyclodextrin-conjugated poly(ε-lysine) derivatives
- Cellulose fibre-cellulose acetate hybrid composites with nanosilica
- Assessment and influence of internal rigid core on the contact parameters for soft hemispherical fingertips
- Properties of high temperature resistance and salt tolerance drilling fluids incorporating acrylamide/2-acrylamido-2-methyl-1-propane sulfonic acid/N-vinylpyrrolidone/dimethyl diallyl ammonium chloride quadripolymer as fluid loss additives
- Thermotropic overheating protection glazings: effect of functional additives and processing conditions on the overheating protection performance
- Experimental rapid surface heating by induction for injection molding of large LCD TV frames
- Effect of reaction conditions on the thermal stability of polystyrene grafted oil palm empty fruit bunch (OPEFB) fiber
- Compatibilization of polyamide 6/poly(2,6-dimethyl-1,4-phenylene oxide) blends by poly(styrene-co-maleic anhydride)