Editorial
Dear readers,
Metallography as a profession was initiated at the Lette-Verein in Berlin over 100 years ago. Today, it can only be trained at the vocational college in Solingen and at the Lette-Verein. On the occasion of this year’s Materialography Conference in Berlin, Practical Metallography has dedicated this issue to the Lette-Verein, for which I would like to take this opportunity to express my sincere thanks. All of the articles in this issue were written by former students or teachers of the Lette Association. Three of the articles in this issue describe the detective work involved in analyzing damage to metal workpieces. The fourth shows how simple hand experiments can awaken young people’s interest in materials and metallography.
I am very pleased with this issue with its focus on the Lette-Verein and hope you enjoy reading it.
Volker Hinrichs
Head of Metallography Department
Lette-Verein Berlin
Liebe Leserinnen und Leser,
Die Metallographie als Beruf wurde im Lette-Verein Berlin vor über 100 Jahren erfunden. Man kann ihn heutzutage nur am Berufskolleg in Solingen und am Lette-Verein erlernen. Anlässlich der in diesem Jahr in Berlin stattfindenden Materialographie Tagung hat die Praktische Metallographie dieses Heft dem Lette-Verein gewidmet, wofür ich mich an dieser Stelle ganz herzlich bedanken möchte. Alle Beiträge in diesem Heft sind unter der Autorenschaft von ehemaligen Schülerinnen und Schülern beziehungsweise Lehrkräften des Lette Vereins entstanden. Drei der präsentierten Artikel beschreiben die detektivische Arbeit bei der Analyse von Schadensfällen an metallischen Werkstücken. Der vierte zeigt den Weg, wie durch einfache Handexperimente bei jungen Menschen das Interesse an Werkstoffen und der Metallographie geweckt werden kann.
Ich freue mich sehr über diese Ausgabe mit ihrem Fokus auf dem Lette-Verein und wünsche viel Spaß bei Lesen.
Volker Hinrichs
Abteilungsleiter Metallographie
Lette-Verein Berlin

© 2024 Walter de Gruyter GmbH, Berlin/Boston, Germany
This work is licensed under the Creative Commons Attribution 4.0 International License.
Articles in the same Issue
- Contents
- Editorial
- Editorial
- 10.1515/pm-2024-0045
- Failure Analysis
- Metallurgical failure investigation of small bore piping (SBP) in a diesel hydrotreating unit (DHT) of an oil refinery
- What if fractography does not tell us anything? – Failure of a side seal retainer
- Do cracked jaws of the four-jaw chuck of a large lathe pose a danger?
- Attracting a new generation to materials science
- Picture of the Month
- Picture of the Month
- People
- Interview with Dr. Volker Hinrichs
- News
- News
- Meeting Diary
- Meeting Diary
Articles in the same Issue
- Contents
- Editorial
- Editorial
- 10.1515/pm-2024-0045
- Failure Analysis
- Metallurgical failure investigation of small bore piping (SBP) in a diesel hydrotreating unit (DHT) of an oil refinery
- What if fractography does not tell us anything? – Failure of a side seal retainer
- Do cracked jaws of the four-jaw chuck of a large lathe pose a danger?
- Attracting a new generation to materials science
- Picture of the Month
- Picture of the Month
- People
- Interview with Dr. Volker Hinrichs
- News
- News
- Meeting Diary
- Meeting Diary