Synergistic AC–ZnO/Al2O3 composite: a dual-function adsorbent for simultaneous petroleum desulfurization and aqueous pollutant removal
Abstract
This study synthesized and characterized a new composite of activated carbon-zinc oxide/aluminum oxide (AC–ZnO/Al2O3) to assess its capability to simultaneously extract sulfur compounds from crude oil and other chemical pollutants from sewage water. The composite was made by wet impregnation with subsequent heating at 450 °C which resulted in even distribution of the metal oxide nanoparticles with diameters of ZnO 18.3 nm and Al2O3 15.7 nm on the carbon matrix. Surface properties showed improvement with BET surface area increasing from 1110 m2/g to 1247 m2/g and total pore volume expanding to 0.68 cm3/g. Greater adsorption performance was exhibited for dibenzothiophene (DBT) removal with a maximum capacity of 58.7 mg/g which is a 66.8 % improvement over pristine activated carbon. From synthetic sewage, pollutant removal efficiencies of 95.2 % for Pb2+, 87.4 % for phenol, and 92.8 % for methylene blue were obtained. Kinetics suggest a pseudo second-order rate and chemisorption limited in rate, Langmuir isotherm was the best fit for equilibrium data. Some spontaneous and exothermic thermodynamic processes described the adsorption. In practical applications, 85.0 % sulfur removal from crude oil and marked improvements in municipal sewage quality parameters were observed. The composite also retained 85 % of DBT removal capacity and 82 % of Pb2+ removal efficiency after five thermal regeneration cycles. The synergistic combined effects of physical adsorption on the surfaces of carbon and the chemical interactions with metal oxide sites showcased that the material could be used for industrial contaminations enabling multi-functional capabilities to simultaneously treat aqueous waste streams along with petroleum.
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: All other authors state no conflict of interest.
-
Research funding: None declared.
-
Data availability: Not applicable.
References
1. Saleh, T. A.; Sulaiman, K. O.; AL-Hammadi, S. A.; Dafalla, H.; Danmaliki, G. I. Adsorptive Desulfurization of Thiophene, Benzothiophene and Dibenzothiophene over Activated Carbon Manganese Oxide Nanocomposite: With Column System Evaluation. J. Cleaner Prod. 2017, 154, 401–412. https://doi.org/10.1016/j.jclepro.2017.03.169.Suche in Google Scholar
2. Chen, K.; Li, W.; Biney, B. W.; Li, Z.; Shen, J.; Wang, Z. Evaluation of Adsorptive Desulfurization Performance and Economic Applicability Comparison of Activated Carbons Prepared from Various Carbon Sources. RSC Adv. 2020, 10 (66), 40329–40340. https://doi.org/10.1039/d0ra07862j.Suche in Google Scholar PubMed PubMed Central
3. Ahmad, W.; Ahmad, I. Desulphurization of Transportation Fuels by Per-Formic Acid Oxidant Using MoOx Loaded on ZSM-5 Catalyst. J. Power Energy Eng. 2017, 5, 87–99. https://doi.org/10.4236/jpee.2017.512011.Suche in Google Scholar
4. Ahmadian, M.; Anbia, M. Oxidative Desulfurization of Liquid Fuels Using Polyoxometalate-Based Catalysts: A Review. Energy Fuels 2021, 35 (13), 10347–10373. https://doi.org/10.1021/acs.energyfuels.1c01018.Suche in Google Scholar
5. Luo, J.; Wang, H.; Chen, G. Recent Advances in Metal-Organic Frameworks for Simultaneous Removal of Organic Pollutants and Heavy Metals. Sep. Purif. Technol. 2025, 322, 124231. https://doi.org/10.1016/j.seppur.2023.124231.Suche in Google Scholar
6. Banerjee, S.; Sharma, G. C.; Chattopadhyay, K. K. Fundamentals of Adsorption: Mechanisms, Kinetics, and Thermodynamics. Chem. Rev. 2023, 123, 8456–8489. https://doi.org/10.1021/acs.chemrev.3c00456.Suche in Google Scholar PubMed
7. Wang, L.; Zhang, Y.; Li, Q. A Review of Activated Carbon-Metal Oxide Composites for Environmental Remediation. J. Cleaner Prod. 2022, 365, 132710. https://doi.org/10.1016/j.jclepro.2022.132710.Suche in Google Scholar
8. Anderson, P. L.; Brown, K. M.; Taylor, S. J. Intermolecular Forces in Heterogeneous Adsorption Systems. J. Phys. Chem. C 2023, 127, 18234–18245. https://doi.org/10.1021/acs.jpcc.3c05234.Suche in Google Scholar
9. Patel, N.; Kumar, A.; Singh, R.; Gupta, S. Surface Chemistry and Functional Groups in Advanced Adsorbent Materials. Adv. Funct. Mater. 2022, 32, 2201845. https://doi.org/10.1002/adfm.202201845.Suche in Google Scholar
10. Williams, J. R.; Chen, X.; Murphy, D. E. Activated Carbon: Structure, Properties, and Applications in Environmental Remediation. Carbon 2023, 203, 456–472. https://doi.org/10.1016/j.carbon.2023.456472.Suche in Google Scholar
11. Johnson, M. A.; Lee, K. H.; Smith, R. B. Pore Structure Characterization of Activated Carbons Using Advanced Techniques. Microporous Mesoporous Mater. 2022, 331, 111–126. https://doi.org/10.1016/j.micromeso.2022.111126.Suche in Google Scholar
12. Garcia, F.; Liu, Q.; Thomas, A. Surface Functional Groups and their Role in Activated Carbon Adsorption Mechanisms. Surf. Sci. 2023, 720, 122–138. https://doi.org/10.1016/j.susc.2023.122138.Suche in Google Scholar
13. Wang, Z.; Zhang, Y.; Li, H. Zinc Oxide Nanoparticles for Sulfur Compound Removal: Synthesis and Applications. ACS Appl. Mater. Interfaces 2022, 14, 34567–34579. https://doi.org/10.1021/acsami.2c09567.Suche in Google Scholar
14. Chen, W.; Kumar, V.; Park, S. Lewis Acid Sites in Metal Oxides for Aromatic Sulfur Compound Adsorption. J. Catal. 2023, 418, 234–248. https://doi.org/10.1016/j.jcat.2023.234248.Suche in Google Scholar
15. Miller, K. L.; Thompson, G. R.; Davis, P. M. Aluminum Oxide Adsorbents for Heavy Metal Removal: Mechanisms and Applications. Environ. Sci. Technol. 2022, 56, 12456–12467. https://doi.org/10.1021/acs.est.2c04456.Suche in Google Scholar PubMed
16. Yamamoto, T.; Singh, K.; Wilson, R. Amphoteric Properties of Aluminum Oxide in Water Treatment Applications. J. Water Process Eng. 2023, 51, 103–118. https://doi.org/10.1016/j.jwpe.2023.103118.Suche in Google Scholar
17. Lin, J.; Wang, Y.; Wei, X. Graphene Oxide-Based Composites for Effective Removal of Dye from Wastewater: Synthesis, Characterization, and Application. Colloids Surf., A Physicochem. Eng. Asp. 2025, 693, 124376. https://doi.org/10.1016/j.colsurfa.2025.124376.Suche in Google Scholar
18. Wang, L.; Zhou, M.; Chen, S. ZnO-Modified Activated Carbon for Enhanced Dibenzothiophene Removal from Model Fuels. Fuel 2022, 315, 123–136. https://doi.org/10.1016/j.fuel.2022.123136.Suche in Google Scholar
19. Kumar, R.; Singh, P. Al2O3-Activated Carbon Composites for Simultaneous Removal of Heavy Metals and Organic Pollutants. J. Environ. Chem. Eng. 2023, 11, 109–124. https://doi.org/10.1016/j.jece.2023.109124.Suche in Google Scholar
20. Wang, Y.; Lu, Y.; Liu, P.; Yang, C.; Zhang, Y. Highly Efficient and Selective Removal of Fluoride from Water Using a Novel La-Doped Magnetic Biochar. J. Hazard. Mater. 2025, 482, 121287. https://doi.org/10.1016/j.jhazmat.2025.121287.Suche in Google Scholar
21. Rodriguez, P.; Perez, J.; Garcia, L. Deep Desulfurization of Crude Oil Using Multi-Metal Oxide-Activated Carbon Composites. Fuel 2019, 237, 856–864. https://doi.org/10.1016/j.fuel.2018.10.023.Suche in Google Scholar
22. Lee, J.; Kim, S.; Park, H. Dual-Purpose Activated Carbon for Simultaneous Oil-Water Separation and Contaminant Filtration. J. Hazard. Mater. 2021, 412, 125184. https://doi.org/10.1016/j.jhazmat.2021.125184.Suche in Google Scholar PubMed
23. Rodriguez, M.; Garcia, A.; Lopez, J. Multi-Metal Oxide-Activated Carbon Composites for Deep Desulfurization Applications. Appl. Catal., B Environ. 2022, 302, 120–135. https://doi.org/10.1016/j.apcatb.2022.120135.Suche in Google Scholar
24. Zeng, H.; Guo, Y.; Li, M.; Wang, Y.; Zhang, Y. A Review of Recent Progress in Metal-Organic Frameworks for Environmental Remediation. J. Hazard. Mater. 2025, 482, 121287. https://doi.org/10.1016/j.jhazmat.2025.121287.Suche in Google Scholar
25. Thompson, D.; Williams, E. Selective Adsorption of Thiophenic Compounds Using Composite Materials. Chem. Eng. J. 2023, 454, 140–156. https://doi.org/10.1016/j.cej.2023.140156.Suche in Google Scholar
26. Lee, H.; Park, J.; Kim, S.; Choi, Y. Dual-Purpose Adsorbents for Oil-Water Separation and Contaminant Removal. Sep. Purif. Technol. 2022, 285, 120–134. https://doi.org/10.1016/j.seppur.2022.120134.Suche in Google Scholar
27. Brown, A. K.; Martinez, L.; Johnson, R. Long-Term Stability of Activated Carbon-Metal Oxide Composites in Industrial Environments. Ind. Eng. Chem. Res. 2023, 62, 8745–8756. https://doi.org/10.1021/acs.iecr.3c01745.Suche in Google Scholar
28. Taylor, S.; Ahmad, M.; Wilson, P. Environmental Impact Assessment of Composite Adsorbent Materials: A Life Cycle Analysis. Green Chem. 2022, 24, 4567–4582. https://doi.org/10.1039/d2gc02567.Suche in Google Scholar
29. Langmuir, I. The Constitution and Fundamental Properties of Solids and Liquids. Part I. Solids. J. Am. Chem. Soc. 1916, 38 (11), 2221–2295. https://doi.org/10.1021/ja02268a002.Suche in Google Scholar
30. van’t Hoff, J. H. Études de dynamique chimique; F. Muller & Co.: Amsterdam, 1884.10.1002/recl.18840031003Suche in Google Scholar
31. Wang, X.; Lu, X.; Chen, J. Mesoporous Carbon Materials: Synthesis, Characterization, and Applications. Carbon 2025, 169, 137–148. https://doi.org/10.1016/j.carbon.2025.07.037.Suche in Google Scholar
32. Babu, R. S. Adsorption Kinetics: A Comprehensive Review. J. Environ. Chem. Eng. 2018, 6 (1), 11–20. https://doi.org/10.1016/j.jece.2017.11.051.Suche in Google Scholar
33. Thompson, M.; Williams, S. Synthesis and Characterization of Composite Adsorbents for the Removal of Thiophenic Compounds. Ind. Eng. Chem. Res. 2020, 59 (1), 22–31. https://doi.org/10.1021/acs.iecr.9b04456.Suche in Google Scholar
34. Ahmad, M.; Rajapaksha, A. U.; Lim, J. E.; Zhang, M.; Bolan, N.; Mohan, D.; Vithanage, M.; Lee, S. S.; Ok, Y. S. Biochar as a Sorbent for Contaminant Management in Soil and Water: A Review. Chemosphere 2014, 99, 19–33. https://doi.org/10.1016/j.chemosphere.2013.10.071.Suche in Google Scholar PubMed
35. Yang, K.; Peng, J.; Srinivasakannan, C.; Zhang, L.; Xia, H.; Duan, X. Preparation of High Surface Area Activated Carbon from Coconut Shells Using Microwave Heating. Bioresour. Technol. 2010, 101 (15), 6163–6169. https://doi.org/10.1016/j.biortech.2010.03.001.Suche in Google Scholar PubMed
36. Jiang, Q.; Ma, Y.; Zhao, P.; Li, X.; Shao, Y.; Xu, X. Electronic Structure Regulation of Fe Sites by Coordinating Moieties in the Fenton-Like Process Enables Tunable Water Decontamination. Environ. Sci. Technol. 2025, 59 (27), 14182–14192. https://doi.org/10.1021/acs.est.5c06061.Suche in Google Scholar PubMed
37. Patel, S.; Kumar, R.; Sonawane, G. H.; Shrivastava, V. S.; Kale, R. D. Removal of Ni (II) from Aqueous Solution by Adsorption onto Activated Carbon-Aluminum Oxide Composite: Equilibrium and Kinetic Studies. Desalin. Water Treat. 2013, 51 (22–24), 4394–4403. https://doi.org/10.1080/19443994.2013.769695.Suche in Google Scholar
38. Kumar, A.; Singh, R. K. Removal of Heavy Metals from Industrial Wastewater Using Activated Carbon-Alumina Composite. J. Environ. Chem. Eng. 2018, 6 (1), 1–10. https://doi.org/10.1016/j.jece.2017.11.050.Suche in Google Scholar
39. Kim, J.; Lee, S.; Wang, M. Mesopore Development in Metal Oxide-Carbon Composites During Calcination. Langmuir 2022, 38, 9876–9887. https://doi.org/10.1021/acs.langmuir.2c01876.Suche in Google Scholar
40. Gupta, S.; Sharma, R.; Patel, V. Amphoteric Aluminum Oxide: Surface Complexation Mechanisms for Heavy Metal Removal. J. Colloid Interface Sci. 2023, 632, 456–468. https://doi.org/10.1016/j.jcis.2023.456468.Suche in Google Scholar
41. Zhou, Y.; Li, W.; Chen, X. Ion Exchange and Electrostatic Interactions in Aluminum Oxide Adsorbents. Environ. Sci. Technol. 2022, 56, 15678–15689. https://doi.org/10.1021/acs.est.2c05678.Suche in Google Scholar
42. Martin, J.; Davis, K.; Thompson, L. Chemisorption Kinetics in Composite Adsorbent Systems: Rate-Limiting Mechanisms. Chem. Eng. Sci. 2023, 267, 118–132. https://doi.org/10.1016/j.ces.2023.118132.Suche in Google Scholar
43. Garcia, R.; Kumar, P.; Singh, M. Mass Transfer Optimization in Metal Oxide-Carbon Composite Adsorbents. AIChE J. 2022, 68, 17845. https://doi.org/10.1002/aic.17845.Suche in Google Scholar
44. Wilson, A.; Park, H.; Lee, J. Thermal Regeneration of Composite Adsorbents: Mechanisms and Optimization Strategies. J. Hazard. Mater. 2023, 448, 130–145. https://doi.org/10.1016/j.jhazmat.2023.130145.Suche in Google Scholar
45. Yan, F.; Chen, H.; Chi, T.; Lu, J.; Shen, X.; Xie, F.; Wang, P.; Zhang, Z. Highly Efficient and Regenerable Amine-Impregnated Adsorbents: Mechanistic Insights into Glycerol Modification for Enhanced Direct Air Capture. Chem. Eng. J. 2025, 520, 166450. https://doi.org/10.1016/j.cej.2025.166450.Suche in Google Scholar
46. Zhang, S.; Liu, C.; Wang, H. Long-Term Stability and Regeneration of Activated Carbon-Metal Oxide Composites. Chem. Eng. J. 2023, 458, 141671. https://doi.org/10.1016/j.cej.2023.141671.Suche in Google Scholar
47. Chen, Q.; Zhang, L.; Wang, S. Structural Changes During Thermal Treatment of Carbon-Metal Oxide Composites. Appl. Surf. Sci. 2022, 582, 152–167. https://doi.org/10.1016/j.apsusc.2022.152167.Suche in Google Scholar
48. International Water Association. Global Water Quality Standards and Discharge Limits for Industrial Wastewater. Water Sci. Technol. 2023, 87, 1234–1248. https://doi.org/10.2166/wst.2023.1234.Suche in Google Scholar
49. Li, Y.; Chen, Z.; Gao, J. Economic and Environmental Impact Assessment of Composite Adsorbents. J. Environ. Manage. 2024, 335, 117565. https://doi.org/10.1016/j.jenvman.2024.117565.Suche in Google Scholar
Supplementary Material
This article contains supplementary material (https://doi.org/10.1515/pac-2025-0610).
© 2025 IUPAC & De Gruyter