Study on the properties of ground film paper prepared from lactic acid-modified cellulose
-
Jiahao Ma
und
Shanshan Gao
Abstract
Lactic acid impregnated ground film paper was prepared using the method of lactic acid impregnation of raw paper. The physical properties, chemical composition, crystallinity, thermal stability, surface morphology of the paper, barrier properties, and light transmittance of the lactic acid paper were investigated using FT-IR, XRD, TGA, SEM, water vapor blocking, oxygen blocking, mechanical properties testing, and optical property testing. Results showed that at room temperature (20 °C), when lactic acid concentration was 100 %, reaction time was 48 h, and 100 °C high temperature drying prepared lactic acid paper, it exhibited superior performance: dry strength of 2.83 IkN/m, wet strength of 0.36 kN/m, Cobb value of 4.50 g/m2, tear of 359.42 mN, water vapor barrier of 693.46 g m−2 24 h−1, and oxygen barrier of 933.43 cm3 m−2 24 h−1. Degradation rate reached 22.94 % after two weeks of soil landfill.
Funding source: Foundation of State Key Laboratory of Biobased Material and Green Papermaking
Award Identifier / Grant number: No. XWZR201901
Funding source: NationalNatural Science Foundation of China
Award Identifier / Grant number: 22078167
Funding source: Qilu University of Technology the Youth Innovative Team Development Plan of Colleges and Universities in Shandong Province
Award Identifier / Grant number: 2019KJC008
Funding source: Qilu University of Technology; Major innovation project of Qingdao West Coast
Award Identifier / Grant number: 2019-27, 2021-27
Funding source: Shandong Province Major Innovation Project
Award Identifier / Grant number: 2018CXGC1001
Funding source: Key laboratory of pulp and paper science and technology of Ministry of Education
Award Identifier / Grant number: No. KF202119
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission. Jiahao Ma: conceptualization, data curation, formal analysis, writing – original draft. Yuzheng Wang: investigation. Yang Hao: methodology. Yanan Sun: validation. Shanshan Gao: supervision. Xiangmin Meng: resources. Fushan Chen: project administration. Xiaoming Song: funding acquisition, writing – review & editing.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: The authors state no conflict of interest.
-
Research funding: This work was supported by (No. KF202119) Key laboratory of pulp and paper science and technology of Ministry of Education, Qilu University of Technology the Youth Innovative Team Development Plan of Colleges and Universities in Shandong Province (2019KJC008); NationalNatural Science Foundation of China (22078167); Shandong Province Major Innovation Project (2018CXGC1001); Foundation of State Key Laboratory of Biobased Material and Green Papermaking (No. XWZR201901); Qilu University of Technology; Major innovation project of Qingdao West Coast (2019-27, 2021-27).
-
Data availability: The raw data can be obtained on request from the corresponding author.
References
Archaviboonyobul, T., Jinkarn, T., Sane, S., Chariyachotilert, S., and Kongcharoenkiat, S. (2014). Water resistance and barrier properties improvement of paperboard by poly(lactic acid) electrospraying. Packag. Technol. Sci. 27: 341–352, https://doi.org/10.1002/pts.2034.Suche in Google Scholar
Cao, Y.Y., Chen, D.D., Meng, Y., Saravanamurugan, S., and Li, H. (2021). Visible-light-driven prompt and quantitative production of lactic acid from biomass sugars over a N-TiO2 photothermal catalyst. Green Chem. 23: 10039–10049, https://doi.org/10.1039/d1gc03057d.Suche in Google Scholar
Cortea, I.M., Ghervase, L., Ratoiu, L., and Radvan, R. (2020). Application of spectroscopic and hyperspectral imaging techniques for rapid and nondestructive investigation of Jewish Ritual parchment. Front. Mater. 7, https://doi.org/10.3389/fmats.2020.601339.Suche in Google Scholar
Domenek, S., Fernandes-Nassar, S., and Ducruet, V. (2018). Rheology, mechanical properties, and barrier properties of poly(lactic acid). In: DiLorenzo, M.L. and Androsch, R. (Eds.). Synthesis, structure and properties of poly(lactic acid). Frontiers Media SA, Lausanne.10.1007/12_2016_17Suche in Google Scholar
Dou, X.Y., Li, Q., Wu, Q.X., Duan, L.S., Zhou, S.Y., and Zhang, Y. (2020). Effects of lactic acid and mixed acid aqueous solutions on the preparation, structure and properties of thermoplastic chitosan. Eur. Polym. J. 134: 109850, https://doi.org/10.1016/j.eurpolymj.2020.109850.Suche in Google Scholar
Gotvajn, A.Z. and Kalcíková, G. (2018). Delamination of plastic-coated waste paper by enzymes of the white rot fungus Dichomitus squalens. J. Environ. Manage. 228: 165–168, https://doi.org/10.1016/j.jenvman.2018.08.111.Suche in Google Scholar PubMed
Guo, Z.Y., Zhou, P., Jiang, L.Q., Liu, S.Q., Yang, Y., Li, Z.Y., Wu, P.D., Zhang, Z.H., and Li, H. (2024). Electron localization-triggered proton pumping toward Cu single atoms for electrochemical CO2 methanation of unprecedented selectivity. Adv. Mater. 36: e2311149, https://doi.org/10.1002/adma.202311149.Suche in Google Scholar PubMed
Jang, M., Yang, H., Park, S.A., Sung, H.K., Koo, J.M., Hwang, S.Y., Jeon, H., Oh, D.X., and Park, J. (2022). Analysis of volatile organic compounds produced during incineration of non-degradable and biodegradable plastics. Chemosphere 303: 134946, https://doi.org/10.1016/j.chemosphere.2022.134946.Suche in Google Scholar PubMed
Jin, T.Z., Wang, Y.J., Yao, S., Hu, C.X., Ma, T., and Xia, W.J. (2023). Bioconversion of carbon dioxide to succinate by Citrobacter. Chem. Eng. J. 452: 139668, https://doi.org/10.1016/j.cej.2022.139668.Suche in Google Scholar
Lee, G., Lee, H.M., and Kim, Y.H. (2019). Thermal and mechanical properties of poly(l-lactic acid) films plasticized with propylene carbonate. Polymer 43: 113–122, https://doi.org/10.7317/pk.2019.43.1.113.Suche in Google Scholar
Liu, T., Jiang, P.P., Liu, H.L., Li, M.T., Dong, Y.M., Wang, R.M., and Wang, Y.J. (2017). Performance testing of a green plasticizer based on lactic acid for PVC. Polym. Test. 61: 205–213, https://doi.org/10.1016/j.polymertesting.2017.05.012.Suche in Google Scholar
Liu, Z.R., Hu, Y.W., Dong, R.M., Zhang, S.H., Li, H., and Chen, R. (2024). Synthesis and characterization of novel water hyacinth (Eichhornia crassipes) biodegradable mulch films. Ind. Crops Prod. 222: 119548, https://doi.org/10.1016/j.indcrop.2024.119548.Suche in Google Scholar
Regmi, U., Palma, M., and Barroso, C.G. (2012). Direct determination of organic acids in wine and wine-derived products by Fourier transform infrared (FT-IR) spectroscopy and chemometric techniques. Anal. Chim. Acta 732: 137–144, https://doi.org/10.1016/j.aca.2011.11.009.Suche in Google Scholar PubMed
Sebestyén, Z., Czégény, Z., Badea, E., Carsote, C., Sendrea, C., Barta-Rajnai, E., Bozi, J., Miu, L., and Jakab, E. (2015). Thermal characterization of new, artificially aged and historical leather and parchment. J. Anal. Appl. Pyrolysis 115: 419–427, https://doi.org/10.1016/j.jaap.2015.08.022.Suche in Google Scholar
Sundar, N., Ananda Kumar, S., Pavithra, A., and Ghosh, S. (2020). Studies on semi-crystalline poly lactic acid (PLA) as a hydrophobic coating material on Kraft paper for imparting barrier properties in coated abrasive applications. Prog. Org. Coat. 145: 105682, https://doi.org/10.1016/j.porgcoat.2020.105682.Suche in Google Scholar
Tsai, C.C., Wu, R.J., Cheng, H.Y., Li, S.C., Siao, Y.Y., Kong, D.C., and Jang, G.W. (2010). Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films. Polym. Degrad. Stab. 95: 1292–1298, https://doi.org/10.1016/j.polymdegradstab.2010.02.032.Suche in Google Scholar
Wang, S.W., Chen, K.Y., and Wang, Q.B. (2018). Ytterbium triflate immobilized on sulfo-functionalized SBA-15 catalyzed conversion of cellulose to lactic acid. J. Porous Mater. 25: 1531–1539, https://doi.org/10.1007/s10934-018-0566-7.Suche in Google Scholar
Wu, X.Q., Song, X.M., Cao, Z.Y., Ma, Y., Sun, Y.F., Chen, F.S., and Gao, S.S. (2024). Modification of polyvinyl alcohol with 2-hydroxypropionic acid and cross-linking with glutaraldehyde for the preparation of biodegradable mulch paper and its properties. Nord. Pulp Pap. Res. J. 39: 213–227, https://doi.org/10.1515/npprj-2024-0014.Suche in Google Scholar
Zhao, Y.Q., Cheung, H.Y., Lau, K.T., Xu, C.L., Zhao, D.D., and Li, H.L. (2010). Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polym. Degrad. Stab. 95: 1978–1987, https://doi.org/10.1016/j.polymdegradstab.2010.07.015.Suche in Google Scholar
Zou, H.T., Yi, C.H., Wang, L.X., Liu, H.T., and Xu, W.L. (2009). Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy. J. Therm. Anal. Calorim. 97: 929–935, https://doi.org/10.1007/s10973-009-0121-5.Suche in Google Scholar
© 2024 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Biorefining
- Fractionation methods of eucalyptus kraft lignin for application in biorefinery
- Pulp and paper industry side-stream materials as feed for the oleaginous yeast species Lipomyces starkeyi and Rhodotorula toruloides
- Chemical Pulping
- Comparing classic time series models and state-of-the-art time series neural networks for forecasting as-fired liquor properties
- Optimization of kraft pulping process for Sesbania aculeata (dhaincha) stems using RSM
- On the nature of the selectivity of oxygen delignification
- Unlocking potential: the role of chemometric modeling in pulp and paper manufacturing
- Effects of chemical environment on softwood kraft pulp: exploring beyond conventional washing methods
- Bleaching
- Variations in carbohydrates molar mass distribution during chemical degradation and consequences on fibre strength
- Mechanical Pulping
- Energy consumption in refiner mechanical pulping
- Paper Technology
- Australian wheat and hardwood fibers for advanced packaging materials
- Compression refining: the future of refining? Application to bleached kraft eucalyptus pulp
- The effect of nanocellulose to coated paper and recycled paper
- Interpreting the relationship between properties of wood and pulping & paper via machine learning algorithms combined with SHAP analysis
- Hybridization to prepare environmentally friendly, cost-effective superhydrophobic oleophobic coatings
- Paper Physics
- Characterising the mechanical behaviour of dry-formed cellulose fibre materials
- Paper Chemistry
- Study on the properties of ground film paper prepared from lactic acid-modified cellulose
- Environmental Impact
- Characterization of sludge from a cellulose pulp mill for its potential biovalorization
- The in situ green synthesis of metal organic framework (HKUST-1)/cellulose/chitosan composite aerogel (CSGA/HKUST-1) and its adsorption on tetracycline
- Evaluation of the potential use of powdered activated carbon in the treatment of effluents from bleached kraft pulp mills
- Recycling
- Waste newspaper activation by sodium phosphate for adsorption dynamics of methylene blue
Artikel in diesem Heft
- Frontmatter
- Biorefining
- Fractionation methods of eucalyptus kraft lignin for application in biorefinery
- Pulp and paper industry side-stream materials as feed for the oleaginous yeast species Lipomyces starkeyi and Rhodotorula toruloides
- Chemical Pulping
- Comparing classic time series models and state-of-the-art time series neural networks for forecasting as-fired liquor properties
- Optimization of kraft pulping process for Sesbania aculeata (dhaincha) stems using RSM
- On the nature of the selectivity of oxygen delignification
- Unlocking potential: the role of chemometric modeling in pulp and paper manufacturing
- Effects of chemical environment on softwood kraft pulp: exploring beyond conventional washing methods
- Bleaching
- Variations in carbohydrates molar mass distribution during chemical degradation and consequences on fibre strength
- Mechanical Pulping
- Energy consumption in refiner mechanical pulping
- Paper Technology
- Australian wheat and hardwood fibers for advanced packaging materials
- Compression refining: the future of refining? Application to bleached kraft eucalyptus pulp
- The effect of nanocellulose to coated paper and recycled paper
- Interpreting the relationship between properties of wood and pulping & paper via machine learning algorithms combined with SHAP analysis
- Hybridization to prepare environmentally friendly, cost-effective superhydrophobic oleophobic coatings
- Paper Physics
- Characterising the mechanical behaviour of dry-formed cellulose fibre materials
- Paper Chemistry
- Study on the properties of ground film paper prepared from lactic acid-modified cellulose
- Environmental Impact
- Characterization of sludge from a cellulose pulp mill for its potential biovalorization
- The in situ green synthesis of metal organic framework (HKUST-1)/cellulose/chitosan composite aerogel (CSGA/HKUST-1) and its adsorption on tetracycline
- Evaluation of the potential use of powdered activated carbon in the treatment of effluents from bleached kraft pulp mills
- Recycling
- Waste newspaper activation by sodium phosphate for adsorption dynamics of methylene blue
