Abstract
Paper cultural relics are both precious, inheritable and fragile. However, with the passage of time, paper will also be affected by a variety of factors, and will appear mildew, yellow, brittle, or even completely damaged. In order to protect the cultural relics, extend lifespan paper, CMC-acrylate-OVPOSS graft copolymerization emulsion was synthesized by using carboxymethyl cellulose (CMC) as substrate, methyl methacrylate (MMA), butyl acrylate (BA), glycidyl methacrylate (GMA), hydroxyethyl methacrylate (HEMA), octavinyl polyhedral oligomeric silsesquioxane (OVPOSS) as graft copolymer. The CMC-acrylate-OVPOSS emulsion was coated on the surface of the paper to test its protective effect on the paper. The results showed that the mass concentration of 10 % reinforcement solution coated on the paper, mechanical properties of paper were greatly improved, and the gloss and whiteness of paper were slightly changed, the paper also had a certain aging resistance and acid and alkali corrosion resistance. At the same time, the reversibility experiment showed that the reinforcement material had a certain reversibility.
Funding statement: The authors state no funding involved.
-
Conflict of interest: The authors declare no conflicts of interest.
References
Afsharpour, M., Rad, F.T., Malekian, H. (2011) New cellulosic titanium dioxide nanocomposite as a protective coating for preserving paper-art-works. J. Cult. Heritage 12(4):380–383.10.1016/j.culher.2011.03.001Suche in Google Scholar
Anagnostopoulos, C.A., Tsiatis, M. (2016) Experimental data on the properties of polymer-modified cement grouts using epoxy and acrylic resin emulsions. Data Brief 9:463–469.10.1016/j.dib.2016.09.016Suche in Google Scholar PubMed PubMed Central
Ariafar, A.A., Afsharpour, M., Samanian, K. (2018) Use of TiO2/chitosan nanoparticles for enhancing the preservative effects of carboxymethyl cellulose in paper-art-works against biodeterioration. Int. Biodeterior. Biodegrad. 131:67–77.10.1016/j.ibiod.2017.04.025Suche in Google Scholar
Bergamonti, L., Potenza, M., Haghighi Poshtiri, A., Lorenzi, A., Sanangelantoni, A.M., Lazzarini, L., Lottici, P.P., Graiff, C. (2020) Ag-functionalized nanocrystalline cellulose for paper preservation and strengthening. Carbohydr. Polym. 231:115773.10.1016/j.carbpol.2019.115773Suche in Google Scholar PubMed
Chen, F., Dong, W., Lin, F., Ren, W., Ma, X. (2021) Composite proton exchange membrane with balanced proton conductivity and swelling ratio improved by gradient-distributed POSS nanospheres. Compos. Commun. 24:100676.10.1016/j.coco.2021.100676Suche in Google Scholar
Cong, C., Cui, C., Meng, X., Zhou, Q. (2014) Stability of POSS crosslinks and aggregates in tetrafluoroethylene-propylene elastomers/OVPOSS composites exposed to hydrochloric acid solution. Polym. Degrad. Stab. 100:29–36.10.1016/j.polymdegradstab.2013.12.032Suche in Google Scholar
Dong, Z., Xu, Z. (2012) Dynamic mechanical properties of paper. Guangxi J. Light Ind. 29(6):19–20.Suche in Google Scholar
Estan-Cerezo, G., Alonso, D.A., Martín-Martínez, J.M. (2017) Reactivity of novel ethyl cyanoacrylate and 6-hydroxyhexyl acrylate adhesive mixtures and their influence on adhesion and thermal stability. Eur. Polym. J. 88:75–92.10.1016/j.eurpolymj.2017.01.010Suche in Google Scholar
Feng, J., Ma, J., Pang, X., Tang, B. (2020) Non-destructive quantitative analysis of nano-mechanics of aged Xuan paper. J. Cult. Heritage 46:155–158.10.1016/j.culher.2020.06.002Suche in Google Scholar
Gheno, G., Badetti, E., Brunelli, A., Ganzerla, R., Marcomini, A. (2018) Consolidation of Vicenza, Arenaria and Istria stones: A comparison between nano-based products and acrylate derivatives. J. Cult. Heritage 32:44–52.10.1016/j.culher.2018.02.013Suche in Google Scholar
Guo, X., Ge, S., Wang, J., Zhang, X., Zhang, T., Lin, J., Zhao, C.X., Wang, B., Zhu, G., Guo, Z. (2018) Waterborne acrylic resin modified with glycidyl methacrylate (GMA): Formula optimization and property analysis. Polymer 143:155–163.10.1016/j.polymer.2018.04.020Suche in Google Scholar
Huang, X., Sun, J., Lv, K., Liu, J., Shen, H., Zhang, F. (2018) Application of core-shell structural acrylic resin/nano-SiO2 composite in water based drilling fluid to plug shale pores. J. Nat. Gas Sci. Eng. 55:418–425.10.1016/j.jngse.2018.05.023Suche in Google Scholar
Jia, M., Zhang, X., Weng, J., Zhang, J., Zhang, M. (2019) Protective coating of paper works: ZnO/cellulose nanocrystal composites and analytical characterization. J. Cult. Heritage 38:64–74.10.1016/j.culher.2019.02.006Suche in Google Scholar
Jin, S.-S., Qi, Y.-P., Shen, Y.-F., Li, H. (2019) The application of organosilicon modified polyurethane in reinforcing traditional paper. Nord. Pulp Pap. Res. J. 34:485–494.10.1515/npprj-2019-0014Suche in Google Scholar
Lei, H., He, D., Guo, Y., Tang, Y., Huang, H. (2018) Synthesis and characterization of UV-absorbing fluorine-silicone acrylic resin polymer. Appl. Surf. Sci. 442:71–77.10.1016/j.apsusc.2018.02.134Suche in Google Scholar
Li, P. (2011) A brief discussion on the damage causes and protection measures of paper cultural relics. Silk Road 19(24):96–97.Suche in Google Scholar
Li, Q., Xi, S., Zhang, X. (2014) Conservation of paper relics by electrospun PVDF fiber membranes. J. Cult. Heritage 15(4):359–364.10.1016/j.culher.2013.09.003Suche in Google Scholar
Li, Z., Huang, K. (2005) Discussion on the protection of books and archives data from the chemical composition of paper. J. Educ. Inst. Jilin Prov. 21(2):12–15.Suche in Google Scholar
Liu, J., Su, X., Nan, Y., Wu, Z., Liu, R. (2021) Synthesis of three kinds of multi-armed cardanol-based acrylic resins based on different routes for UV/EB-cured coatings. Prog. Org. Coat. 151:106035.10.1016/j.porgcoat.2020.106035Suche in Google Scholar
Liu, R., Qiu, Y. (2013) A silk screen for strengthening paper[P/OL]. 103114500A, 2013-03-07.Suche in Google Scholar
Mishra, R.K., Sabu, A., Tiwari, S.K. (2018) Materials chemistry and the futurist eco-friendly applications of nanocellulose: Status and prospect. J. Saudi Chem. Soc. 22(8):949–978.10.1016/j.jscs.2018.02.005Suche in Google Scholar
Ozimek, J., Sternik, D., Radzik, P., Hebda, E., Pielichowski, K. (2021) Thermal degradation of POSS-containing nanohybrid linear polyurethanes based on 1,6-hexamethylene diisocyanate. Thermochim. Acta 697:178851.10.1016/j.tca.2020.178851Suche in Google Scholar
Pan, C. (2019) Study on the reinforcement of old newsprint with cellulose derivatives. Master. Guangdong Univ. Techno.Suche in Google Scholar
Pi, P., Hou, K., Wen, X., Xu, S., Cheng, J., Xu, G., Wang, S. (2016) A facile one-step fabrication of robust superhydrophobic/superoleophilic cotton fabric using a crosslinkable POSS-containing fluorinated copolymer. Prog. Org. Coat. 101:522–529.10.1016/j.porgcoat.2016.09.023Suche in Google Scholar
Santos, D.M.D., Nagay, B.E., Silva, E.V.F., Bonatto, L.R., Sonego, M.V., Moreno, A., Rangel, E.C., Cruz, N.C., Goiato, M.C. (2016) In vitro analysis of different properties of acrylic resins for ocular prosthesis submitted to accelerated aging with or without photopolymerized glaze. Mater. Sci. Eng. C: Mater. Biol. Appl. 69:995–1003.10.1016/j.msec.2016.07.081Suche in Google Scholar PubMed
Standards, T.C.N. (2002a) Chinese standard: paper and board-Determination of tearing resistance. GB/T 455-2002, Beijing, China: The Chinese National Standards.Suche in Google Scholar
Standards, T.C.N. (2002b) Chinese standard: paper, board and pulp-Measurement of brightness. GB/T 7974-2002, Beijing, China: The Chinese National Standards.Suche in Google Scholar
Standards, T.C.N. (2008a) Chinese standard: paper and board – Accelerated aging. GB/T 464-2008, Beijing, China: The Chinese National Standards.Suche in Google Scholar
Standards, T.C.N. (2008b) Chinese standard: paper and board-Determination of folding endurance. GB/T 457-2008, Beijing, China: The Chinese National Standards.Suche in Google Scholar
Standards, T.C.N. (2008c) Chinese standard: paper and board-Determination of tensile properties. GB/T12914-2008, Beijing, China: The Chinese National Standards.Suche in Google Scholar
Standards, T.C.N. (2013) Chinese standard: paper and board-Measurement of specular gloss. GB/T 8941-2013, Beijing, China: The Chinese National Standards.Suche in Google Scholar
Sun, Z. (2020) The understanding and Research on the protection and restoration of paper cultural relics. Panor. Chin. Natl. 24(12):197–198.Suche in Google Scholar
Sun, M., Wang, J., Zhang, H., Zhang, B., Fan, Z., Su, B. (2015) Measurement of the reversible rate of conservation materials for ancient murals. J. Cult. Herit. 16(1):49–56.10.1016/j.culher.2014.01.010Suche in Google Scholar
Wang, M., Wang, M., Zhou, J., Chen, W., Ren, W. (2019) Properties of EPDM rubber modified by octavinyl silsequioxane. China Elastomerics 29(3):28–31.Suche in Google Scholar
Xu, B. (2020) Discussion on the protection of paper cultural relics in museums. Identi. Appreci. Cult. Relics 11(19):106–107.Suche in Google Scholar
Xu, J., Zhang, T., Jiang, Y., Chen, Q., Yang, D., Yu, Z. (2020) Synthesis of microcrystalline cellulose/TiO2/fluorine/styrene-acrylate coatings and the application for simulated paper cultural relic protection. Cellulose 27:1–14.10.1007/s10570-020-03210-wSuche in Google Scholar
Zervos, S. (2013) Revising established tenets in paper conservation. Proc., Soc. Behav. Sci. 73:35–42.10.1016/j.sbspro.2013.02.016Suche in Google Scholar
Zhang, X. (2017) Current situation and Countermeasures of paper cultural relics protection. Chin. Foreign Commun. 3(8):50.Suche in Google Scholar
Zhang, X., Wang, Y., Zhan, C. (2007) Tradition and modern of paper cultural relics protection and restoration. Cult. Geogr. 2(1):61–65.Suche in Google Scholar
© 2022 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Chemical pulping
- The effects of high alkali impregnation and oxygen delignification of softwood kraft pulps on the yield and mechanical properties
- Bleaching
- Evaluation of pulp and paper properties produced from two new bleaching sequences
- Mechanical pulping
- The effects of wood chip compression on cellulose hydrolysis
- Physical meaning of cutting edge length and limited applications of Specific Edge Load in low consistency pulp refining
- Paper technology
- Enhancement in tissue paper production by optimizing creeping parameters such as application of various blade material (MOC) and creep pocket geometry
- Paper physics
- The effect of some office papers quality characteristics on offset printing process
- Paper chemistry
- Application of hydrophobically modified hydroxyethyl cellulose-methyl methacrylate copolymer emulsion in paper protection
- Application of cyclohexene oxide modified chitosan for paper preservation
- Application of carboxymethyl cellulose-acrylate-OVPSS graft copolymer emulsion in paper reinforcement and protection
- Coating
- Application of BBR-DCMC/KH-791-SiO2/HPDSP multifunctional protective fluid in paper reinforcement and protection
- Nanotechnology
- Research on ink blot evaluation of aged paper before and after restoration
- Chemical technology/modifications
- Physical properties of kraft pulp oxidized by hydrogen peroxide under mildly acidic conditions
- Miscellaneous
- High calcium content of Eucalyptus dunnii wood affects delignification and polysaccharide degradation in kraft pulping
- Refining gentleness – a key to bulky CTMP
- Electrospinning hydrophobically modified polyvinyl alcohol composite air filter paper with water resistance and high filterability properties
- Hydroxypropyl methylcellulose films reinforced with cellulose micro/nanofibrils: study of physical, optical, surface, barrier and mechanical properties
- Effects of localized environment on the eucalypt clones quality aiming kraft pulp production
- Oxidation process concept to produce lignin dispersants at a kraft pulp mill
Artikel in diesem Heft
- Frontmatter
- Chemical pulping
- The effects of high alkali impregnation and oxygen delignification of softwood kraft pulps on the yield and mechanical properties
- Bleaching
- Evaluation of pulp and paper properties produced from two new bleaching sequences
- Mechanical pulping
- The effects of wood chip compression on cellulose hydrolysis
- Physical meaning of cutting edge length and limited applications of Specific Edge Load in low consistency pulp refining
- Paper technology
- Enhancement in tissue paper production by optimizing creeping parameters such as application of various blade material (MOC) and creep pocket geometry
- Paper physics
- The effect of some office papers quality characteristics on offset printing process
- Paper chemistry
- Application of hydrophobically modified hydroxyethyl cellulose-methyl methacrylate copolymer emulsion in paper protection
- Application of cyclohexene oxide modified chitosan for paper preservation
- Application of carboxymethyl cellulose-acrylate-OVPSS graft copolymer emulsion in paper reinforcement and protection
- Coating
- Application of BBR-DCMC/KH-791-SiO2/HPDSP multifunctional protective fluid in paper reinforcement and protection
- Nanotechnology
- Research on ink blot evaluation of aged paper before and after restoration
- Chemical technology/modifications
- Physical properties of kraft pulp oxidized by hydrogen peroxide under mildly acidic conditions
- Miscellaneous
- High calcium content of Eucalyptus dunnii wood affects delignification and polysaccharide degradation in kraft pulping
- Refining gentleness – a key to bulky CTMP
- Electrospinning hydrophobically modified polyvinyl alcohol composite air filter paper with water resistance and high filterability properties
- Hydroxypropyl methylcellulose films reinforced with cellulose micro/nanofibrils: study of physical, optical, surface, barrier and mechanical properties
- Effects of localized environment on the eucalypt clones quality aiming kraft pulp production
- Oxidation process concept to produce lignin dispersants at a kraft pulp mill