Predicting inkjet dot spreading and print through from liquid penetration- and picoliter contact angle measurement

References

Barakat, A., Mayer-Laigle, C., Solhy, A., Arancon, R.A.D., de Vries, H., Luque, R. (2014) Mechanical pretreatments of lignocellulosic biomass: towards facile and environmentally sound technologies for biofuels production. RSC Adv. 4(89):48109–48127.10.1039/C4RA07568DSuche in Google Scholar

Blechschmidt, J. Taschenbuch der Papiertechnik. Carl Hanser Verlag, München, 2013.10.3139/9783446437012Suche in Google Scholar

Bohlin, E. Surface and porous structure of pigment coatings: Interactions with flexographic ink and effects on print quality. PhD thesis, Karlstad University, 2013.Suche in Google Scholar

Bristow, J.A. (1967) Liquid absorption into paper during short time intervals. Sven. Papp.tidn. 70(19):623–629.Suche in Google Scholar

Daun, M. Model for the dynamics of liquid penetration into porous structures and its detection with the help of changes in ultrasonic attenuation. Dissertation. Technical University, Darmstadt, 2006.Suche in Google Scholar

Diddens, C., Kuerten, J.G., van der Geld, C.W., Wijshoff, H.M. (2017) Modeling the evaporation of sessile multi-component droplets. J. Colloid Interface Sci. 487:426–436.10.1016/j.jcis.2016.10.030Suche in Google Scholar PubMed

Dong, H., Carr, W.W., Morris, J.F. (2006) An experimental study of drop-on-demand drop formation. Phys. Fluids 18:7.10.1063/1.2217929Suche in Google Scholar

Furlani, E.P. Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets. volume 1. Wiley-VCH Verlag, 2016.10.1002/9783527684724.ch2Suche in Google Scholar

Gigac, J., Kasajov, M., Maholyiov, M., Stankovsk, M., Letko, M. (2013) Prediction of surface structure of coated paper and of ink setting time by infrared spectroscopy. Nord. Pulp Pap. Res. J. 28(2):274–281.10.3183/npprj-2013-28-02-p274-281Suche in Google Scholar

Hebbar, R., Isloor, A., Ismail, A. (2017) Contact Angle Measurements. In: Membrane Characterization. pages 219–255.10.1016/B978-0-444-63776-5.00012-7Suche in Google Scholar

Hladnik, A. (1997) Dynamic wetting and liquid sorption in paper – FIBRO 1100 DAT measuring. Papier 25(3-4):44–48.Suche in Google Scholar

Holik, H. Recycled Fibre and Deinking. Helsinki, 2009.Suche in Google Scholar

Karsa, D.R. Surfactants in Polymers, Coatings, Inks and Adhesives. Blackwell Pub., 2003.Suche in Google Scholar

Kettle, J., Lamminmäki, T., Gane, P. (2010) A review of modified surfaces for high speed inkjet coating. Surf. Coat. Technol. 204(12-13):2103–2109.10.1016/j.surfcoat.2009.10.035Suche in Google Scholar

Kipphan, H. Heidelberger Handbuch der Printmedien. Springer-Verlag, 2000.10.1007/978-3-642-57024-7Suche in Google Scholar

Krainer, S., Smit, C., Hirn, U. (2019) The effect of viscosity and surface tension on inkjet printed picoliter dots. RSC Adv. 9(54):31708–31719.10.1039/C9RA04993BSuche in Google Scholar PubMed PubMed Central

Kuijpers, C., van Stiphout, T., Huinink, H., Tomozeiu, N., Erich, S., Adan, O. (2018) Quantitative measurements of capillary absorption in thin porous media by the Automatic Scanning Absorptometer. Chem. Eng. Sci. 178:70–81.10.1016/j.ces.2017.12.024Suche in Google Scholar

Lamminmäki, T., Kettle, J., Gane, P. (2011) Absorption and adsorption of dye-based inkjet inks by coating layer components and the implications for print quality. Colloids Surf. A, Physicochem. Eng. Asp. 380(1–3):79–88.10.1016/j.colsurfa.2011.02.015Suche in Google Scholar

Lamminmäki, T., Kettle, J., Puukko, P., Ridgway, C., Gane, P. (2012) Short timescale inkjet ink component diffusion: An active part of the absorption mechanism into inkjet coatings. J. Colloid Interface Sci. 365(1):222–235.10.1016/j.jcis.2011.08.045Suche in Google Scholar

Law, K.Y., Zhao, H. Surface wetting: Characterization, Contact Angle, and Fundamentals. 2015.Suche in Google Scholar

Li, R., Zhang, Y., Cao, Y., Liu, Z. (2015) Ink Penetration of Uncoated Inkjet Paper and Impact on Printing Quality. BioResources 10:4.10.15376/biores.10.4.8135-8147Suche in Google Scholar

Lindqvist, U., Hakola, L., Boris, Z., Wallstrom, E. (2004) Advances in Printing Science and Technology. In: Proceedings of the 31st International iarigai Research Conference. Acta Craphica Publishers. page 260.Suche in Google Scholar

Lindqvist, U., Hakola, L., Heilmann, J., Zhmud, B., Wallström, E. (2006) Interaction Characteristics in Different Applications of Ink-Jet Printing. TAGA J. 2:99–109.Suche in Google Scholar

Luo, Y., Zhao, Y., Duan, Y., Du, S. (2011) Surface and wettability property analysis of CCF300 carbon fibers with different sizing or without sizing. Mater. Des. 32(2):941–946.10.1016/j.matdes.2010.08.004Suche in Google Scholar

Marmur, A. (1992) Penetration and displacement in capillary systems of limited size. Adv. Colloid Interface Sci. 39:13–33.10.1016/0001-8686(92)80053-ZSuche in Google Scholar

McKinley, G.H., Renardy, M. Wolfgang von Ohnesorge. Physics of Fluids, vol. 23, 2011.10.1063/1.3663616Suche in Google Scholar

Mielonen, K., Geydt, P., Österberg, M., Johansson, L.S., Backfolk, K., Ovaska, S.-S., Laukala, T., Backfolk, K. (2015a) Inkjet ink spreading on polyelectrolyte multilayers deposited on pigment coated paper. J. Colloid Interface Sci. 438(3):179–190.10.1016/j.jcis.2014.09.077Suche in Google Scholar PubMed

Mielonen, K., Geydt, P., Tåg, C.-M., Backfolk, K. (2015b) Inkjet ink spreading, absorption and adhesion on substrates coated with thin layers of cationic polyelectrolytes. Nord. Pulp Pap. Res. J. 30(2):179–188.10.3183/npprj-2015-30-01-p179-188Suche in Google Scholar

Mielonen, K., Ovaska, S.S., Laukala, T., Backfolk, K. (2016) Three-Layered Polyelectrolyte Structures as Inkjet Receptive Coatings: Part 2. Interaction With Pigment-based Inks. J. Imaging Sci. Technol. 60(3):1–9.10.2352/J.ImagingSci.Technol.2016.60.3.030502Suche in Google Scholar

Neimo, L., Yhdistys, S.P.-I. Papermaking Chemistry. volume 4, 1999.Suche in Google Scholar

Ohnesorge, W.V. (1936) Formation of Drops by Nozzles and the Breakup of Liquid Jets. Appl. Math. Mech. 16:355–358.10.1002/zamm.19360160611Suche in Google Scholar

Ovaska, S.S., Backfolk, K. (2018) The versatility of the Bristow absorption tester – A review. Nord. Pulp Pap. Res. J. 33(2):279–296.10.1515/npprj-2018-3040Suche in Google Scholar

Owens, D.K., Wendt, R.C. (1969) Estimation of the surface free energy of polymers. J. Appl. Polym. Sci. 13(8):1741–1747.10.1002/app.1969.070130815Suche in Google Scholar

Resch, P., Bauer, W., Hirn, U. (2010) Calendering effects on coating pore structure and ink setting behavior. Tappi J. 9(1):27–35.10.32964/TJ9.1.27Suche in Google Scholar

Ridgway, C.J., Gane, P.A.C. (2002) Controlling the absorption dynamic of water-based ink into porous pigmented coating structures to enhance print performance. Nord. Pulp Pap. Res. J. 17(2):119–129.10.3183/npprj-2002-17-02-p119-129Suche in Google Scholar

Roiban, L., Foray, G., Rong, Q., Perret, A., Ihiawakrim, D., Masenelli-Varlot, K., Maire, E., Yrieix, B. (2016) Advanced three dimensional characterization of silica-based ultraporous materials. RSC Adv. 6(13):10625–10632.10.1039/C5RA26014KSuche in Google Scholar

Rosenholm, J.B. (2015) Liquid spreading on solid surfaces and penetration into porous matrices: Coated and uncoated papers. Adv. Colloid Interface Sci. 220:8–53.10.1016/j.cis.2015.01.009Suche in Google Scholar PubMed

Sarah, K., Ulrich, H. (2018) Short timescale wetting and penetration on porous sheets measured with ultrasound, direct absorption and contact angle. RSC Adv. 8(23):12861–12869.10.1039/C8RA01434ESuche in Google Scholar

Sato, K., Ozaki, N., Nakanishi, K., Sugahara, Y., Oaki, Y., Salinas, C., Herrera, S., Kisailus, D., Imai, H. (2017) Effects of nanostructured biosilica on rice plant mechanics. RSC Adv. 7(22):13065–13071.10.1039/C6RA27317CSuche in Google Scholar

Schmid, C., Hudd, A. (2010) Formulation and Properties of Waterborne Inkjet Inks. In: The Chemestry of Inkjet Inks. Ed. Magdassi, S., World Scientific Publishing Co. Pte. Ltd.. pp. 123–140.10.1142/9789812818225_0007Suche in Google Scholar

Siregar, D., Kuerten, J.G., van der Geld, C. (feb 2013) Numerical simulation of the drying of inkjet-printed droplets. J. Colloid Interface Sci. 392(1):388–395.10.1016/j.jcis.2012.09.063Suche in Google Scholar PubMed

Svanholm, E. Printability and ink-coating interactions in inkjet printing. PhD thesis, Karlstad University, 2007.Suche in Google Scholar

Ventura, M.G., Paninho, A.I., Nunes, A.V., Fonseca, I.M., Branco, L.C. (2015) Biocompatible locust bean gum mesoporous matrices prepared by ionic liquids and a scCO2 sustainable system. RSC Adv. 5(130):107700–107706.10.1039/C5RA17314KSuche in Google Scholar

Von Bahr, M., Seppänen, R., Tiberg, F., Zhmud, B. (2004) Dynamic wetting of AKD-sized papers. J. Pulp Pap. Sci. 30(3):74–81.Suche in Google Scholar

Wypych, G. (2018) Typical Primer Formulations and Applications to different substrates. In: Handbook of Adhesion Promoters. ChemTec Publishing. pp. 77–91.10.1016/B978-1-927885-29-1.50007-9Suche in Google Scholar

Yang, D., Krasowska, M., Priest, C., Popescu, M.N., Ralston, J. (2011) Dynamics of capillary-driven flow in open microchannels. J. Phys. Chem. C 115(38):18761–18769.10.1021/jp2065826Suche in Google Scholar

Yang, L. Ink-Paper Interaction: A study in ink-jet color reproduction. PhD thesis, Linkoping University, 2003.Suche in Google Scholar

Yang, L., Jianghao, L., Lingya, G. (2013) Detailed insights to liquid absorption and liquid – paper interaction. In: XV Fundamental Research Symposium. Cambridge. pp. 585–598.10.15376/frc.2013.2.585Suche in Google Scholar

Yip, K.L., Lubinsky, A.R., Perchak, D.R., Ng, K.C. (2003) Measurement and Modeling of Drop Absorption Time for Various Ink-Receiver Systems. J. Imaging Sci. Technol. 47(5):378–393.10.2352/J.ImagingSci.Technol.2003.47.5.art00004Suche in Google Scholar

Zwang, David Production Inkjet – The Next Wave: Canon Océ VarioPrint i300 Sheetfed Inkjet Press and More – WhatTheyThink, 2015.Suche in Google Scholar