Abstract
Using disposable screen-printed electrodes is a convenient way of monitoring environmental pollution, production process control etc. Usually, commercially available screen-printed electrodes are used, but more and more studies are being carried out in the field of printing electrodes on thinner, low-cost and versatile substrates, including paper. In the present research, the comparison of screen-printed electrodes printed on different paper-based materials is presented. Two unique and innovative invasive plant-based papers made from (1) Japanese knotweed, (2) Canadian and Giant goldenrod and (3) commercially available cardboard were used as a printing material for the electrodes. The selected paper substrates were characterized, and screen-printed electrodes were printed. The influence of substrates’ properties and pre- or post-treatment of the screen-printed electrodes on the electrochemical behaviour is thoroughly analyzed. The results indicate that the printing substrate (roughness) had the most significant influence on the cyclic voltammetry response. Comparing pre- and post-treatment of screen-printed electrodes, it was shown that grinding influenced the electrochemical activity significantly, while corona discharge does not have as significant influence. Besides, it was shown that the invasive plant-based papers are viable alternatives to commercially available papers and can be used as low-cost and eco-friendly alternatives for disposable screen-printed electrodes.
Funding source: Javna Agencija za Raziskovalno Dejavnost RS
Award Identifier / Grant number: J2-8182
Funding statement: Slovenian Research Agency is gratefully acknowledged for funding via J2-8182.
Acknowledgments
Authors would like to thank Špela Trafela, Anja Drame and dr. Kristina Žužek Rožman, Jožef Stefan Institute, Ljubljana, Slovenia for their support and assistance.
Conflict of interest: The authors declare no conflict of interest.
References
BASi (2018) Cyclic Voltammetry – Data Analysis. Available from https://www.basinc.com/manuals/EC_epsilon/Techniques/CycVolt/cv_analysis.Suche in Google Scholar
Bollström, R. Paper for printed electronics and functionality. Department of Chemical Engineering. Åbo Akademi University, Finland, 2013. p. 100.Suche in Google Scholar
Cinti, S., et al. (2018) Low-cost and reagent-free paper-based device to detect chloride ions in serum and sweat. Talanta 179:186–192.10.1016/j.talanta.2017.10.030Suche in Google Scholar PubMed
Cinti, S., et al. (2017) Carbon Black-Modified Electrodes Screen-Printed onto Paper Towel, Waxed Paper and Parafilm M(®). Sensors (Basel, Switzerland) 17(10):2267.10.3390/s17102267Suche in Google Scholar PubMed PubMed Central
Cumba, L. R., et al. (2016) Can the mechanical activation (polishing) of screen-printed electrodes enhance their electroanalytical response? Analyst 141(9):2791–2799.10.1039/C6AN00167JSuche in Google Scholar
Desmet, C., et al. (2016) Paper electrodes for bioelectrochemistry: Biosensors and biofuel cells. Biosens. Bioelectron. 76:145–163.10.1016/j.bios.2015.06.052Suche in Google Scholar PubMed
Du, C. X., et al. (2016) A novel procedure for fabricating flexible screen-printed electrodes with improved electrochemical performance. IOP Conf. Ser., Mater. Sci. Eng. 137(1):012060.10.1088/1757-899X/137/1/012060Suche in Google Scholar
Ebnesajjad, S. (2014) Theories of Adhesion. In: Surface Treatment of Materials for Adhesive Bonding. William Andrew Publishing. pp. 77–91.10.1016/B978-0-323-26435-8.00005-8Suche in Google Scholar
Eisby, J., Eisby, F. Corona treatment, Vetaphone. Available from http://www.vetaphone.com/UserFiles/File/pdf/Technical%20feature%20-%20Corona%20Treatment.pdf.Suche in Google Scholar
Enomae, T., Onabe, F. (1997) Characteristics of Parker Print-Surf Roughness as Compared with Bekk Smoothness. Sen’i Gakkaishi 53(3):86–95.10.2115/fiber.53.86Suche in Google Scholar
Fletcher, S. (2016) Screen-Printed Carbon Electrodes. In: Electrochemistry of Carbon Electrodes, Eds. Alkire, R. C., Bartlett, P. N., Lipkowski, J., pp. 425–444.10.1002/9783527697489.ch12Suche in Google Scholar
Garcia, D. E., et al. (2010) A Parametric Design Study of an Electrochemical Sensor. J. Assoc. Lab. Autom. 15(3):179–188.10.1117/12.825902Suche in Google Scholar
Gusmão, R., et al. (2017) Screen-printed carbon electrodes doped with TiO2-Au nanocomposites with improved electrocatalytic performance. Mater. Today Commun. 11:11–17.10.1016/j.mtcomm.2017.02.003Suche in Google Scholar
Hayat, A., Marty, J. L. (2014) Disposable Screen Printed Electrochemical Sensors: Tools for Environmental Monitoring. Sensors 14(6):10432–10453.10.3390/s140610432Suche in Google Scholar PubMed PubMed Central
Ihalainen, P., et al. (2012) Influence of Surface Properties of Coated Papers on Printed Electronics. Ind. Eng. Chem. Res. 51(17):6025–6036.10.1021/ie202807vSuche in Google Scholar
Jewell, E., et al. (2016) Improved Manufacturing Performance of Screen Printed Carbon Electrodes through Material Formulation. Biosensors 6(3):30.10.3390/bios6030030Suche in Google Scholar PubMed PubMed Central
Kavčič, U., Pleša, T. (2018) The influence of printing properties of screen printed electrodes on sensitivity measured with cyclic voltammetry. In: 9th International Symposium on Graphic Engineering and Design University of Novi Sad, Faculty of Technical Sciences, Department of Graphic Engineering and Design, Novi Sad, Serbia. pp. 253–259.10.24867/GRID-2018-p31Suche in Google Scholar
Li, M., et al. (2012) Recent developments and applications of screen-printed electrodes in environmental assays—A review. Anal. Chim. Acta 734:31–44.10.1016/j.aca.2012.05.018Suche in Google Scholar PubMed
López-López, L., et al. (2017) Disposable electrochemical aptasensor for gluten determination in food. Sens. Actuators B, Chem. 241:522–527.10.1016/j.snb.2016.10.112Suche in Google Scholar
Määttänen, A., et al. (2013) A low-cost paper-based inkjet-printed platform for electrochemical analyses. Sens. Actuators B, Chem. 177:153–162.10.1016/j.snb.2012.10.113Suche in Google Scholar
Medina Rodríguez, B. Inkjet and screen printing for electronic applications. Universitat de Barcelona, Departament d’Enginyeries: Secció d’Electrònica. p. 225. 2016.Suche in Google Scholar
Menart, E., et al. (2017) Novel hydrazinium polyacrylate-based electrochemical gas sensor for formaldehyde. Sens. Actuators B, Chem. 238:71–75.10.1016/j.snb.2016.07.042Suche in Google Scholar
Mohamed, H. M. (2016) Screen-printed disposable electrodes: Pharmaceutical applications and recent developments. TrAC, Trends Anal. Chem. 82:1–11.10.1016/j.trac.2016.02.010Suche in Google Scholar
Morrin, A., et al. (2003) Electrochemical Characterization of Commercial and Home-Made Screen-Printed Carbon Electrodes. Anal. Lett. 36(9):2021–2039.10.1081/AL-120023627Suche in Google Scholar
Prasek, J., et al. (2012) Optimization of planar three-electrode systems for redox system detection. Int. J. Electrochem. Sci. 7(3):1785–1801.10.1016/S1452-3981(23)13840-5Suche in Google Scholar
Wei, H., et al. (2007) Enhanced electrochemical performance at screen-printed carbon electrodes by a new pretreating procedure. Anal. Chim. Acta 588(2):297–303.10.1016/j.aca.2007.02.006Suche in Google Scholar PubMed
Zhao, C., et al. (2013) A microfluidic paper-based electrochemical biosensor array for multiplexed detection of metabolic biomarkers. Sci. Technol. Adv. Mater. 14(5):054402.10.1088/1468-6996/14/5/054402Suche in Google Scholar PubMed PubMed Central
© 2020 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Bleaching
- Unbleached and bleached handsheet characteristics of Subabul heartwood and sapwood
- Mechanical pulping
- Material characterisation for natural fibres: compressibility, permeability and friction
- Paper technology
- Affecting the bonding between PLA fibrils and kraft pulp for improving paper dry-strength
- High strength paper from high yield pulps by means of hot-pressing
- On the development of a continuous methodology to fractionate microfibriallated cellulose
- Non-wood fibers as raw material for pulp and paper industry
- Paper physics
- Modeling of tensile index using uncertain data sets
- The shear and compressive yield stress of fibrillated acacia pulp fiber suspensions
- Paper chemistry
- Composite filler by pre-flocculation of fiber fines and PCC and its effect on paper properties
- Sodium dodecyl sulphate (SDS) residue analysis of foam-formed cellulose-based products
- Printing
- Determining the quality of paper substrates containing triticale pulp for printing industry
- Nanotechnology
- Preparation of CaCO3 nanoparticle/pulp fiber composites using ultrafine bubbles
- Miscellaneous
- Anatomical, morphological and chemical characteristics of kaun straw (Seetaria-ltalika)
- The influence of process parameters of screen-printed invasive plant paper electrodes on cyclic voltammetry
Artikel in diesem Heft
- Frontmatter
- Bleaching
- Unbleached and bleached handsheet characteristics of Subabul heartwood and sapwood
- Mechanical pulping
- Material characterisation for natural fibres: compressibility, permeability and friction
- Paper technology
- Affecting the bonding between PLA fibrils and kraft pulp for improving paper dry-strength
- High strength paper from high yield pulps by means of hot-pressing
- On the development of a continuous methodology to fractionate microfibriallated cellulose
- Non-wood fibers as raw material for pulp and paper industry
- Paper physics
- Modeling of tensile index using uncertain data sets
- The shear and compressive yield stress of fibrillated acacia pulp fiber suspensions
- Paper chemistry
- Composite filler by pre-flocculation of fiber fines and PCC and its effect on paper properties
- Sodium dodecyl sulphate (SDS) residue analysis of foam-formed cellulose-based products
- Printing
- Determining the quality of paper substrates containing triticale pulp for printing industry
- Nanotechnology
- Preparation of CaCO3 nanoparticle/pulp fiber composites using ultrafine bubbles
- Miscellaneous
- Anatomical, morphological and chemical characteristics of kaun straw (Seetaria-ltalika)
- The influence of process parameters of screen-printed invasive plant paper electrodes on cyclic voltammetry