Article
Publicly Available
Frontmatter
Published/Copyright:
July 7, 2022
Published Online: 2022-07-07
Published in Print: 2022-07-26
©2022 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Surface states by grinding thin strips of electrochemically deposited nanocrystalline nickel-iron
- Design optimization of armored wheeled vehicle suspension lower control arm
- Influence of residual oxygen during laser beam welding under vacuum
- Determining the structural life of an electric vehicle battery from road loads
- Cavitation resistance of Stellite 21 coatings tungsten inert gas (TIG) deposited onto duplex stainless steel X2CrNiMoN22-5-3
- Dynamic fracture behavior of 11MnNiMo steel under medium-low loading rate
- High-velocity impact performance of Ramor 500 armor steel
- Thermal and mechanical analyses of an EN AW 6082 alloy with static and dynamic precipitations
- Improving the fatigue life of produced dental implants by the thread-rolling process
- Effect of thermomechanical processing on the mechanical properties of CuZn10 alloy
- Effects of filler material selection on the microstructural, mechanical and corrosion properties of TIG welded AISI/SAE 304L stainless steel sheets and rings
- A new hybrid artificial hummingbird-simulated annealing algorithm to solve constrained mechanical engineering problems
- A hybrid engineering algorithm of the seeker algorithm and particle swarm optimization
- Application of a modular topology optimization framework to an aerospace bracket design
Articles in the same Issue
- Frontmatter
- Surface states by grinding thin strips of electrochemically deposited nanocrystalline nickel-iron
- Design optimization of armored wheeled vehicle suspension lower control arm
- Influence of residual oxygen during laser beam welding under vacuum
- Determining the structural life of an electric vehicle battery from road loads
- Cavitation resistance of Stellite 21 coatings tungsten inert gas (TIG) deposited onto duplex stainless steel X2CrNiMoN22-5-3
- Dynamic fracture behavior of 11MnNiMo steel under medium-low loading rate
- High-velocity impact performance of Ramor 500 armor steel
- Thermal and mechanical analyses of an EN AW 6082 alloy with static and dynamic precipitations
- Improving the fatigue life of produced dental implants by the thread-rolling process
- Effect of thermomechanical processing on the mechanical properties of CuZn10 alloy
- Effects of filler material selection on the microstructural, mechanical and corrosion properties of TIG welded AISI/SAE 304L stainless steel sheets and rings
- A new hybrid artificial hummingbird-simulated annealing algorithm to solve constrained mechanical engineering problems
- A hybrid engineering algorithm of the seeker algorithm and particle swarm optimization
- Application of a modular topology optimization framework to an aerospace bracket design
