Article
Licensed
Unlicensed
Requires Authentication
Technology in the 21st Century – The role of materials and materials testing
-
Horst Czichos
Horst Czichos graduated in Precision Engineering and worked as design engineer in the optical industry. He holds degrees in Physics (FU Berlin) and in Materials Science (TU Berlin) and received from the University of Leuven an honorary doctorate for his interdisciplinary research in tribology. He was President of BAM (1992 to 2002), and of EUROLAB. Currently, he is Professor for Mechatronics at the University of Applied Sciences, BHT, Berlin.
Published/Copyright:
February 10, 2021
Published Online: 2021-02-10
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Frontmatter
- Overview
- Technology in the 21st Century – The role of materials and materials testing
- Materials testing for welding and additive manufacturing applications
- Effect of laser inclination angle on mechanical properties of Hastelloy X processed by selective laser melting
- Component-Oriented testing
- Heat source model for electron beam welding of nickel-based superalloys
- Materialography
- Effects of Ti-bearing inclusions on intragranular ferrite nucleation
- Mechanical testing/Materialography
- Effect of extruded low-density polyethylene on the microstructural and mechanical properties of hot-press produced 3105 aluminum composites
- Production-Oriented testing/Additive manufacturing
- 10.1515/mt-2020-0004
- Materialography
- Effect of austenitizing temperatures on the microstructure and mechanical properties of AISI 9254 steel
- Materials testing for production technologies/Non-destructive testing
- Automation of pipe defect detection and characterization by structured light
- Wear testing
- Wear resistance of HVOF sprayed NiSiCrFeB, WC-Co/NiSiCrFeB, WC-Co, and WC-Cr3C2-Ni rice harvesting blades
- Materials testing for welding and additive manufacturing applications
- Effect of heat treatment on mechanical properties of 3D printed polylactic acid parts
- Wear testing
- Friction and wear properties of heavy load truck composite brake linings
- Mechanical testing/Wear testing
- Effect of Lanthanum on mechanical and wear properties of high-pressure die-cast Mg-3Al-3Sn-3Sb alloy
- Production-Oriented testing
- A novel graphene-based Fe3O4 nanocomposite for magnetic particle inspection
- Materials testing for welding and additive manufacturing applications
- Effect of shielding gas combination on microstructure and mechanical properties of MIG welded stainless steel 316
Articles in the same Issue
- Frontmatter
- Overview
- Technology in the 21st Century – The role of materials and materials testing
- Materials testing for welding and additive manufacturing applications
- Effect of laser inclination angle on mechanical properties of Hastelloy X processed by selective laser melting
- Component-Oriented testing
- Heat source model for electron beam welding of nickel-based superalloys
- Materialography
- Effects of Ti-bearing inclusions on intragranular ferrite nucleation
- Mechanical testing/Materialography
- Effect of extruded low-density polyethylene on the microstructural and mechanical properties of hot-press produced 3105 aluminum composites
- Production-Oriented testing/Additive manufacturing
- 10.1515/mt-2020-0004
- Materialography
- Effect of austenitizing temperatures on the microstructure and mechanical properties of AISI 9254 steel
- Materials testing for production technologies/Non-destructive testing
- Automation of pipe defect detection and characterization by structured light
- Wear testing
- Wear resistance of HVOF sprayed NiSiCrFeB, WC-Co/NiSiCrFeB, WC-Co, and WC-Cr3C2-Ni rice harvesting blades
- Materials testing for welding and additive manufacturing applications
- Effect of heat treatment on mechanical properties of 3D printed polylactic acid parts
- Wear testing
- Friction and wear properties of heavy load truck composite brake linings
- Mechanical testing/Wear testing
- Effect of Lanthanum on mechanical and wear properties of high-pressure die-cast Mg-3Al-3Sn-3Sb alloy
- Production-Oriented testing
- A novel graphene-based Fe3O4 nanocomposite for magnetic particle inspection
- Materials testing for welding and additive manufacturing applications
- Effect of shielding gas combination on microstructure and mechanical properties of MIG welded stainless steel 316
