Optimizing conventional machining process parameters for A713 aluminum alloy using Taguchi method and passive optical network for data transmission
-
Vikas Sharma
,
Sachin Kumar
Abstract
This study focuses on optimizing machining parameters for A713 aluminum alloy, renowned for its high strength-to-weight ratio but challenging to machine with precision. Using the Taguchi method, key parameters – cutting speed, feed rate, and depth of cut – are optimized to improve surface finish, tool life, and dimensional accuracy. An L9 orthogonal array is applied to enhance experimental efficiency. Furthermore, the integration of Passive Optical Network (PON) technology facilitates real-time data monitoring and transmission, enabling continuous feedback and timely adjustments. This hybrid approach of Taguchi optimization and PON technology achieves superior machining performance, boosting surface quality and operational efficiency. The research highlights how modern data transmission solutions like PON can enhance traditional optimization methods, providing a scalable framework for advanced machining processes in industrial applications.
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: I (Dr.Vikas Sharma) am accepted all the responsibility for the entire content of this manuscript and approved its submission.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: The authors state no conflict of interest.
-
Research funding: None declared.
-
Data availability: Not applicable.
References
1. Ahmed, SG. Development of a prediction model for surface roughness in finish turning of aluminium. Sudan Eng Soc J 2006;52:1–5.Search in Google Scholar
2. Abburi, NR, Dixit, US. A knowledge-based system for the prediction of surface roughness in turning process. Robotics Comput Integrated Manuf 2006;22:363–72. https://doi.org/10.1016/j.rcim.2005.08.002.Search in Google Scholar
3. Al-Ahmari, AMA. Predictive machinability models for a selected hard material in turning operations. J Mater Process Technol 2007;190:305–11. https://doi.org/10.1016/j.jmatprotec.2007.02.031.Search in Google Scholar
4. Bhattacharyya, A. Chapter-thermodynamics of chip formation.Search in Google Scholar
5. Antony, J. Multi-response optimization in industrial experiments using Taguchi’s quality loss function and principal component analysis. Qual Reliab Eng Int 2000;16:3–8. https://doi.org/10.1002/(sici)1099-1638(200001/02)16:1%3c3::aid-qre276%3e3.0.co;2-w.10.1002/(SICI)1099-1638(200001/02)16:1<3::AID-QRE276>3.0.CO;2-WSearch in Google Scholar
6. Biswas, CK, et al.. Tool wear prediction using neuro-fuzzy system. Inst Eng J 2008;89:42–6.Search in Google Scholar
7. Basic Definitions and Cutting Tool Geometry. Single point cutting tools, winston churchill’s message to president roosevelt in a radio broadcast on 9 February 1941.Search in Google Scholar
8. Choudhury, SK, Bartarya, G. Role of temperature and surface finish in predicting tool wear using neural network and design of experiments. Int J Mach Tool Manufact 2003;43:747–53. https://doi.org/10.1016/s0890-6955(02)00166-9.Search in Google Scholar
9. Chien, WT, Tsai, CS. The investigation on the prediction of tool wear and the determination of optimum cutting conditions in machining 17-4PH stainless steel. J Mater Proces Technol 2003;140:340–5. https://doi.org/10.1016/s0924-0136(03)00753-2.Search in Google Scholar
10. Thamizhmanii, S, et al.. Analysis of surface roughness by using Taguchi method. Achiev Mater Manuf Eng 2007;20:503–5.Search in Google Scholar
11. Doniavi, A, et al.. Empirical modeling of surface roughness in turning process of 1060 steel using factorial design methodology. J Appl Sci 2007;7:2509–13. https://doi.org/10.3923/jas.2007.2509.2513.Search in Google Scholar
12. Dogra, DM. Effect of tool geometry variation on finish turning: a review. J Eng Sci Technol 2010;8:401–7. https://doi.org/10.25103/jestr.041.01.Search in Google Scholar
13. Danilevskii, VV. Geometry of a cutting tool.Search in Google Scholar
14. Feng, CXJ, Wang, X. Development of empirical models for surface roughness prediction in finish turning. Int J Adv Manuf Technol 2002;20:348–56. https://doi.org/10.1007/s001700200162.Search in Google Scholar
15. Fu, P, Hope, AD. A hybrid pattern recognition architecture for cutting tool condition monitoring. Technol Appl 2008;24:548–58.10.5772/6258Search in Google Scholar
16. Fnides, B, et al.. Cutting forces and surface roughness in hard turning of hot work steel X38CrMoV5-1 using mixed ceramic. Mechanika 2008;2:73–78.Search in Google Scholar
17. Kohli, A, Dixit, US. A neural-network-based methodology for the prediction of surface roughness in a turning process. Int J Adv Manuf Technol 2005;25:118–29. https://doi.org/10.1007/s00170-003-1810-z.Search in Google Scholar
18. Kirby, ED, et al.. Development of an accelerometer based surface roughness prediction system in turning operation using multiple regression techniques. J Ind Technol 2004;20:1–8.Search in Google Scholar
19. Kassab, SY, Khoshnaw, YK. The effect of cutting tool vibration on surface roughness of work piece in dry turning operation. Eng Technol 2007;25:879–89. https://doi.org/10.30684/etj.25.7.6.Search in Google Scholar
20. Lin, WS, et al.. Modeling the surface roughness and cutting force for turning. J Mater Process Technol 2001;108:286–93. https://doi.org/10.1016/s0924-0136(00)00835-9.Search in Google Scholar
21. Lee, SS, Chen, JC. Online surface roughness recognition system using artificial neural networks system in turning operations. Int J Adv Manuf Technol 2003;22:498–509. https://doi.org/10.1007/s00170-002-1511-z.Search in Google Scholar
22. Mahmoud, EAE, Abdelkarim, HA. Optimum cutting parameters in turning operations using HSS cutting tool with 450 approach angle. Sudan Eng Soc J 2006;53:25–30.Search in Google Scholar
23. Özel, T, Karpat, Y. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int J Mach Tool Manufact 2005;45:467–79. https://doi.org/10.1016/j.ijmachtools.2004.09.007.Search in Google Scholar
24. Pal, SK, Chakraborty, D. Surface roughness prediction in turning using artificial neural network. Neural Comput Appl 2005;14:319–24. https://doi.org/10.1007/s00521-005-0468-x.Search in Google Scholar
25. Reddy, BS, et al.. Surface roughness prediction techniques for CNC turning. Asian J Sci Res 2008;1:256–64. https://doi.org/10.3923/ajsr.2008.256.264.Search in Google Scholar
26. Ron Amaral, LHC. Surface roughness. J Asian Sci Res 2002.Search in Google Scholar
27. Suresh, PVS, et al.. A genetic algorithmic approach for optimization of surface roughness prediction model. Int J Mach Tool Manufact 2002;42:675–80. https://doi.org/10.1016/s0890-6955(02)00005-6.Search in Google Scholar
28. Singh, H, Kumar, P. Optimizing feed force for turned parts through the Taguchi technique. Sadhana 2006;31:671–81. https://doi.org/10.1007/bf02716887.Search in Google Scholar
29. Srikanth, T, Kamala, V. A real coded genetic algorithm for optimization of cutting parameters in turning IJCSNS. Int J Comput Sci Netw Secur 2008;8:189–93.Search in Google Scholar
30. Sahoo, P, et al.. Taguchi based practical dimension modeling and optimization in CNC turning. Adv Prod Eng Manag 2008;3:205–17.Search in Google Scholar
31. Thamma, R. Comparison between multiple regression models to study effect of turning parameters on the surface roughness. In: Proceedings of the 200896IAJC-IJME International Conference. wily; 2008:1–12 pp.Search in Google Scholar
32. Wannas, AA. RBFNN model for prediction recognition of tool wear in hard turning. J Eng Appl Sci 2008;3:780–5.Search in Google Scholar
33. Wang, MY, Lan, TS. Parametric optimization on multi-objective precision turning using grey relational analysis. Inf Technol J 2008;7:1072–6. https://doi.org/10.3923/itj.2008.1072.1076.Search in Google Scholar
34. Zhou, Q, Hong, GS, Rahman, M. A new tool life criterion for tool condition monitoring using a neural network. Eng Appl Artif Intell 1995;8:579–88. https://doi.org/10.1016/0952-1976(95)00031-u.Search in Google Scholar
35. Zhong, ZW, Khoo, LP, Han, ST. Prediction of surface roughness of turned surfaces using neural networks. Int J Adv Manuf Technol 2006;28:688–93. https://doi.org/10.1007/s00170-004-2429-4.Search in Google Scholar
© 2024 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Amplifiers
- High performance measurement of preamplifier circuits based bipolar/field effect transistors for the optimum photodiode receivers performance in optical communication system
- Different optical fiber hybrid repeater amplifiers arrangement for optical losses and optical dispersion management in the presence of modulation code schemes
- Analysis of bit error rate and receiver sensitivity of a DC biased optical OFDM transmission link using single mode fiber with distributed Raman amplifier
- Devices
- Cascaded amplified Fabry–Perot spatial band pass filter for WDM application
- Performance comparison of different intensity modulation formats for FSO systems
- Bufferless NoC router design for optical networks-on-chip
- Design and analysis of 2D photonic crystals based all optical logic gates
- Fibers
- Study on optical fiber materials and loss-dispersion management optimization technique
- Lasers
- Numerical analysis on impedance characteristics of dual wavelength quantum cascade lasers
- Numerical investigation of in-band pumped holmium-doped fluoride fiber laser operating at 2.1 µm
- Networks
- Parametric evaluation of line-of-sight (LOS) channel in LiFi networks
- High capacity performance signature of micro optical mechanical system switches based fiber Bragg grating scheme implementation in optical WDM data routed center networks
- Optimizing FSO systems for 6G network using particle swarm optimization
- Optimizing conventional machining process parameters for A713 aluminum alloy using Taguchi method and passive optical network for data transmission
- Analysis of software-defined radio for optical networking
- Systems
- Design and performance evaluation of a hybrid FSO-FTTx communication link utilizing UD-WDMA 1.28 Tbps data rates transmission under various weather conditions
- Analyzing the performance of the SD-WDM system with varying channel spacing
- Performance analysis of high dynamic range OFDM radio over fiber system for 5G/NR signals
- Demonstration of 640 Gbps/160 Gbps WDM-PON system based on colorless ONUs
- Machine Learning based modulation format classification framework for inter-satellite optical wireless communication system (IsOWCS)
- 40 Gb/s RoFSO communication system under turbulent channel link for 5G applications
- Performance analysis of UAV-enabled dual-hop mixed RF-FSO communication systems with user scheduling
- Underwater wireless optical communication system incorporating WMZCC and DPS codes under pure sea, clear ocean and coastal sea
- Performance analysis of a hybrid DWDM-FSO system for 6G
- Performance analysis of V2V visible light communication systems under diverse scenarios
Articles in the same Issue
- Frontmatter
- Amplifiers
- High performance measurement of preamplifier circuits based bipolar/field effect transistors for the optimum photodiode receivers performance in optical communication system
- Different optical fiber hybrid repeater amplifiers arrangement for optical losses and optical dispersion management in the presence of modulation code schemes
- Analysis of bit error rate and receiver sensitivity of a DC biased optical OFDM transmission link using single mode fiber with distributed Raman amplifier
- Devices
- Cascaded amplified Fabry–Perot spatial band pass filter for WDM application
- Performance comparison of different intensity modulation formats for FSO systems
- Bufferless NoC router design for optical networks-on-chip
- Design and analysis of 2D photonic crystals based all optical logic gates
- Fibers
- Study on optical fiber materials and loss-dispersion management optimization technique
- Lasers
- Numerical analysis on impedance characteristics of dual wavelength quantum cascade lasers
- Numerical investigation of in-band pumped holmium-doped fluoride fiber laser operating at 2.1 µm
- Networks
- Parametric evaluation of line-of-sight (LOS) channel in LiFi networks
- High capacity performance signature of micro optical mechanical system switches based fiber Bragg grating scheme implementation in optical WDM data routed center networks
- Optimizing FSO systems for 6G network using particle swarm optimization
- Optimizing conventional machining process parameters for A713 aluminum alloy using Taguchi method and passive optical network for data transmission
- Analysis of software-defined radio for optical networking
- Systems
- Design and performance evaluation of a hybrid FSO-FTTx communication link utilizing UD-WDMA 1.28 Tbps data rates transmission under various weather conditions
- Analyzing the performance of the SD-WDM system with varying channel spacing
- Performance analysis of high dynamic range OFDM radio over fiber system for 5G/NR signals
- Demonstration of 640 Gbps/160 Gbps WDM-PON system based on colorless ONUs
- Machine Learning based modulation format classification framework for inter-satellite optical wireless communication system (IsOWCS)
- 40 Gb/s RoFSO communication system under turbulent channel link for 5G applications
- Performance analysis of UAV-enabled dual-hop mixed RF-FSO communication systems with user scheduling
- Underwater wireless optical communication system incorporating WMZCC and DPS codes under pure sea, clear ocean and coastal sea
- Performance analysis of a hybrid DWDM-FSO system for 6G
- Performance analysis of V2V visible light communication systems under diverse scenarios
